PN130 resin is yellow color C9 hydrocarbon resin obtained from the polymerization of unsaturated aromatic resin. The most important uses are vehicles for painting and ink.
PN140 resin is yellow color C9 hydrocarbon resin obtained from the polymerization of unsaturated aromatic resin. The most important uses are vehicles for asphalt and printing ink.
PE120 resin is thermoplastic, light brown color C9 hydrocarbon resin obtained from polymerizing unsaturated aromatic resin through the process of thermal polymerization. The major usages are paint and coating.
PE100 resin is thermoplastic, light brown color C9 hydrocarbon resin obtained from polymerizing unsaturated aromatic resin through the process of thermal polymerization. The major usages are rubber and paint.
PE130 resin is thermoplastic, light brown color C9 hydrocarbon resin obtained from polymerizing unsaturated aromatic resin through the process of thermal polymerization. The major usages are ink and asphalt.
hydrogenated C9 hydrocarbon resin which compete and substitute C5 resin in Hot Melt Adhesive and Road marking paint
C9 Hydrocarbon resin ZL & ZK Series Product performance: ZKXY ZL and ZK Series are low molecular weight thermoplastic aromatic resins with light color and low odor . ZL series have good compatibility with alkyd resin , so they can be used in giving short drying time and perfect gloss to alkyd based paints.They are also widely used in printing ink ,hot melt adhesive ,solvent based adhesives and sealant as the good compatibility with EVA and various solvents. ZK series are characterized by very light color, low odor and good compatibility with EVA , can be comparable to similar foreign products, widely used in packaging and wood working hot melt adhesive.
Specification: Softening Point()ï¼? 80-90 90-100 100-110 110-120 Color(Gardner in 50% toluene),â?¤ 8-18 8-18 8-18 8-18 Ash(%),â?¤ 0.08 0.08 0.08 0.08 Acidity(mgKOH/mg),â?¤ 0.6 0.6 0.6 0.6 Recommended Application Adhesive Paint, Tyre Rubber Adhesive, Tire Rubber Adhesive, Tyre Rubber Application: 1. Used in Hot melt adhesive(HMA) and Solvent based adhesive(SBA) as tackifier resin 2. Solvent based paint 3. Printing Ink 4. Rubber Compounding 5. Asphalt emulsion mixtures Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
BP series is specially designed for adhesives application. Characterised by lighter colour, less odour as well as wider compatibility and solubility, they are more suitable for hot melt adhesives, bookbinding, shoes adhesive and solvent adhesives etc.
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
HIPS repro pellet mixed color from yoghurt caps HIPS Recycled Pellets Thermoplastics PS has two representatives, GPPS and HIPS. In particular, PS HIPS plastic is the most popular to many advantages and applications. HIPS belongs to the group of hard, transparent resins that are easy to create color, processed by laminating film lamination and easy laminating technology. What is HIPS PLASTIC ? HIPS pellet stands for High Impact Polystyrene. Polystyrene has the chemical formula Polystyrene (C8H8)n which is a long chain hydrocarbon in which alternating carbon centers are attached to the phenyl group (the name given to the aromatic benzene ring). MATERIAL: HIPS repro pellet mixed color from yoghurt caps CATEGORY: HIPS repro TYPE: Pellet GRADE: Mixed color SPECIFICATION: Mixed color.from yoghurt caps Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 900$ - 1150$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
TC100 / copolymerized hydrocarbon resin is produced with and fraction, which has and strengths.It can replace the expensive C5 hydrocarbon resin in hot melt adhesive and rubber tire fields. In rubber tires, TC100 hydrocarbon resin not only can increase the adhesive force between colloidal particles, but also can enhance the adhesion between the particle and the cord thread.TC100 hydrocarbon resin is suitable for producing high quality rubber products. In adhesive, TC100 hydrocarbon resin have better initial adhesion and it also can adjust the adhesive durability and bonding strength. Product Specification: Item Test Method Unit Specification Range Softening Point ASTM-E28-58 95-105 Color ASTM-D-1544 GC 4Max Insoluble ETM-E-99 Vol% 0.05Max Acid Value ASTM-D-974 Vol% 0.2Max Specific Gravity ASTM-D-71-72A g/ 0.99-1.03 Features of TC100 C5/C9 Copolymerized Hydrocarbon Resin: Wide optional range.It will be more stabilized by the addition of antioxidant.Good compatibility with EVA,SIS and SBS etc. Applications:Hot melt adhesive,Synthetic rubber
PG100 resin is a kind of C5 modified C9 resin, with both character of C5 and C9 component, which is designed to tackify a variety of adhesive polymers, including ethylene vinyl acetate (EVA), styrenic block copolymers (SIS, SBS, SEBS), amorphous polyalphaolefins (APAO).
High compatibility c9 aromatic hydrocarbon petroleum resin for hot melt adhesive Quick detail: Hsu™ hs110-4 is c9 aromatic hydrocarbon petroleum resin. Description: Hsu™ hs110-4 is a low odor, light color thermoplastic hydrocarbon resin produced from purified aromatic petroleum-derived monomers with a naphthalene elimination process. It is characterized by low odor and high level compatibility. It is compatible with many resins, mineral oils and polymers. Good compatibility with major solvents in industrial paints and adhesives. It is mainly used in industrial paints and adhesives. High compatibility c9 hydrocarbon resin Applications: Wood working adhesive, hot melt adhesives, rubber compounding. High compatibility c9 hydrocarbon resinhigh compatibility c9 hydrocarbon resin High compatibility c9 hydrocarbon resin Specifications: Grade no. Hsu™ hs110-4 Softening point(°c) 110±5 Color g# 4# max Acid value(mg koh/g) max. 0.3 Competitive advantage: • excellent compatibility with various base polymers • good chemical stability • high heat resistance and water resistance • excellent tack and peel properties • low volatility and low odor Packaging & shipping 1. Packed in 25kg paper bag, pp bag or paper and pp compounding bag 17 mt without pallets or 14.5mt with pallets for 1*20fc Also can use 750kg container sack, 15mt with pallets for 1*20 fcl. 2. Payment: irrevocable l/c at sight, or 30%t/t in advance 3. Shipment: in 20 days after 30% t/t deposit High compatibility c9 hydrocarbon resin Storage & protection They are non-hazardous product, it should be stored in dry and cool place with fire fighting facilities. Far away from fire, sunshine, moisture and pollution.
C9 hydrogenated hydrocarbon petroleum resin Chemical name: c9 hydrogenated petroleum resin Physical properties: it is produced through the process of refinement, isolation, polymerization and molding with the raw material of hydrocarbon resin c9 which is the by product from the ethylene fragment. The product is white granular, aromatic resin, which is easily soluble in organic solvents such as benzene and toluene etc. It has good compatibility, thermal stability, light stability, good water resistance and chemical resistance. Product specification: Test item C9 hydrogenation # 100 Test method Appearance White granular Eyeballing Softening point(°c) 95-120 Gb/t4507(ring&ball) Acid value(koh mg/g) =1.0 Gb2895 Color gardner (ga) 0-1 Astmd-1544 Melt viscosity(200°c)cps =400 Astmd-3236 Insoluble (vol%) ------ Ash content
Tc100/ copolymerized hydrocarbon resin is produced with and fraction, which has and strengths.It can replace the expensive c5 hydrocarbon resin in hot melt adhesive and rubber tire fields. In rubber tires, tc100 hydrocarbon resin not only can increase the adhesive force between colloidal particles, but also can enhance the adhesion between the particle and the cord thread.Tc100 hydrocarbon resin is suitable for producing high quality rubber products. In adhesive, tc100 hydrocarbon resin have better initial adhesion and it also can adjust the adhesive, s durability and bonding strength. Product specification: Itemtest methodunitspecification range Softening pointastm-e28-58 , 95-105 Colorastm-d-1544gc4max Insolubleetm-e-99vol%0.05max Acid valueastm-d-974vol%0.2max Specific gravityastm-d-71-72ag/0.99-1.03 Features of tc100 c5/c9 copolymerized hydrocarbon resin: Wide optional range.It will be more stabilized by the addition of antioxidant.Good compatibility with eva, sis and sbs etc. Applications:hot melt adhesive, synthetic rubber Package: 25kg kraft paper bag Storage: All resins with low softening point present a risk of solidifying or lump. For softening point less or equal to 110, , we suggest you keep resin in a cool (25, max) ventilated place and avoid direct sunshine.
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate [English name] Sodium dodecyl sulfate. [Abbreviation] SDS [CAS No.] 151-21-3 [Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl [Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl) [Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards. [Technical Indicators] [Performance and Applications] This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries. (1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc. (2) Used as anionic surfactant, emulsifier and foaming agent (Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc. (4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation. (5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent. (Use 6) Biochemical analysis, electrophoresis, ion pair reagent
Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months
We are supplier and exporter of PVC Resin. PVC resin, the physical appearance is white powder, non-toxic, odorless. Relative density 1.35-1.46. It is thermoplastic, insoluble in water, gasoline and ethanol, expandable or soluble in ether, ketone, fatty chlorohy-drocarbons or aromatic hydrocarbons with strong anti--corrosiveness, and good dieletric property. PVC resin can be processed into various plastic products.
