Cisco Compatible: X2 10Gb Sr C Suppliers and Manufacturers

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

China Carnauba Wax supplier Carnauba wax, also known as card that Pakistan wax, yellow solid angle, can be bleached, hard and brittle, not soluble in water, soluble in hot ethanol, hot ether, hot chlorine letter, carbon tetrachloride, oils,. The main components of palmitic acid ester and wax beeswax acid, cosmetic raw material of a hardness of the wisest, and castor oil and other fats and oils and raw materials, good compatibility, Cosmetics commonly used for tablets curing agent, widely used in lipsticks and cream cream category cosmetics, As a substitute for beeswax to enhance the melting point of spindle-shaped cosmetics, gives luster and heat stability. Specification specNo.1 standrad value color gold yellow surface flakes Smell bees wax smell peroxide value 4 acid value(koh/mg/g) 4 Saponification(koh/mg/g) 78-95 melting point C 80-86 viscosity(cp)C 21.6 standard value 5-14 specific gravity 25C 0.997 flash point C 318

Sodium lauryl sarsinine in cosmetics, skin care products, the main role is antistatic, foaming agent, detergent, surfactant, the risk factor is 3, relatively safe, can rest assured to use, for pregnant women generally has no effect, sodium lauryl sarsinine has no acne. N - laurel phthalein sarcosine sodium is a kind of amino acids anionic surfactants, with low toxicity, low irritation, good biodegradability, better compatibility and antimicrobial properties and corrosion resistance and other characteristics, widely used in daily chemicals, food, metal processing, mineral flotation, the deployment of pesticides and biological medicine, etc item value CAS No. 137-16-6 Other Names Sodium lauroylsarcosinate MF C15H28NNaO3 EINECS No. 205-281-5 Place of Origin China Purity 30% 95% Appearance Colorless clear liquid and White powder Usage Cosmetic Raw Materials Brand Name SXNP Model Number SXNP-137-16-6 Product name Sodium lauroylsarcosinate CAS 137-16-6 Flash point 267 Melting point 46 C PH 7.0-9.0 (25, 1M in H2O) Density 1.033 g/mL at 20 C Sample Available Appearance White Prowder MOQ 1 Kg Application Hand soap, body wash, shampoo

Calcium Acetate Monohydrate, E263, CAS no. 5743-26-0, calcium salt of acetic acid, s a white, odorless, and tasteless crystalline powder. Also known as Calcium acetate, manufacturing process via chemical synthesis, calcium carbonate and acetic acid as raw materials. Calcium Acetate Monohydrate is mainly used in the production of candy products, desserts, and baked good (bread, cakes, pastries). As an experienced Calcium Acetate Monohydrate manufacturer and supplier, we has been supplying and exporting Calcium Acetate Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Calcium Acetate powder Specification Product Calcium Acetate CAS anhydride :62-54-4; monohydrate :5743-26-0 INS 263 EINECS 200-540-9 EEC E263 Structure Molecular formula 1.Anhydrous:Ca(C2H3O2)2 2.Hydrates:C4H6CaO4H2O 3.C4H6CaO4xH2O(x

Bard biopsy guns, or biopsy devices, are medical instruments used for obtaining tissue samples from the body for diagnostic purposes. These devices are commonly used in various medical specialties, including radiology, oncology, and gastroenterology. The Bard biopsy guns are produced by C. R. Bard, a subsidiary of Becton, Dickinson, and Company (BD), a global medical technology company. Key features of Bard biopsy guns may include: Spring-Loaded Mechanism: Many biopsy guns operate using a spring-loaded mechanism that allows for the quick and precise deployment of the biopsy needle to obtain tissue samples. Single-Use or Disposable Models: Some Bard biopsy guns are designed for single-use or disposable use. This helps reduce the risk of cross-contamination between patients. Various Needle Sizes: Biopsy guns may come with a variety of needle sizes to accommodate different medical procedures and types of tissue sampling. Trigger Mechanism: A trigger mechanism is often employed to control the firing of the biopsy needle, allowing for accurate placement and retrieval of tissue samples. Compatible with Imaging Modalities: Biopsy guns are often used in conjunction with imaging modalities such as ultrasound, CT scans, or fluoroscopy to guide the needle to the target tissue.

Product name: WS 12 Other Name: Cooling agent WS12 Kinds: WS-23, WS-3, WS-5, WS-12, WS-10, WS-27 Molecular Formula:C18H27NO2 Molecular Weight: 289.41 Appearance: White to off-white powder Purity: 99% CAS NO.: 68489-09-8 EINECS No.: 256-974-4 Supplier: ZhenYiBio Relative Cooling Strength at First Onset WS-5>WS-12>WS-3>Menthyl acetate>WS-23>Menthyl lactate Cooling Longevity WS-12>WS-5>WS-23>WS-3>Menthyl acetate>Menthyl lactate FUNCTION 1. Continuous and long lasting cooling and refreshing effect, no hot , harsh and stinging sensation of Menthol and/or Peppermint. 2. Heatâ?? Resistance is good below 200 �°C donâ??t reduce the cooling impact, suitable use in bakery and other high temperature processes. 3. Cooling intensity remains in general for 15-30 minutes with no burning compared with Menthol based products it is cooler. 4. Low dosage 30-100 mg/kg has good cooling properties. 5. Compatible with oter flavors and also with other cooling agents.

INCI Name: UNDECYLENOYL PHENYLALANINE Molecular Formula: C20H29NO3 Molecular Weight: 331.45 Appearance: White crystalline powder Purity: 98% CAS NO.: 175357-18-3 EINECS No.: 200-568-1 Application: cosmetics and skin care products Supplier: ZHENYIBIO Undecylenoyl phenylalanine is a white powder. It is a structural analogue of I±-MSH. By competitively binding the melanin stimulating hormone receptor MC1-R on melanocytes, the melanocytes cannot produce tyrosinase, thereby inhibiting the activity of melanocytes and reducing the production of melanin. According to some clinical trials, undecylenoyl phenylalanine can indeed reduce spots caused by pigmentation. According to research, this ingredient can block �±-MSH at a concentration of 0.001%, if the concentration is 1%. Then, the melanin production can be fully suppressed from multiple links, and the effect is more obvious and lasting. Undecylenoyl phenylalanine has the following characteristics: 1. Significant skin biocompatibility (lipid amino acid structure) 2. Innovative mode of action �±-MSH antagonist 3. Compared with whitening agents such as arbutin, kojic acid, and vitamin C phosphate magnesium, the effect is more significant. 4. Human experiments have proved that its whitening and lightening effect is remarkable. 5. Highly safe within the recommended dosage (2%). 6. Easy to formulate (very easy to use). 7. Has good compatibility and excellent stability

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder Taian Henson Metal Co lTD

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder