ST-200 portable water well drilling rig equipped with BW-160 mud pump and 22HP diesel engine, Max. drilling depth can be 230m with the opening diameter of 75-400mm, trailer, crawler, and tractor chassis for choice. a. the machine is equipped with crawler chassis device, easy to move with fast speed. b. hydraulic oil pressure feed device, improve drilling efficiency. c. pressure gauge display the condition of the bottom of the drill hole. d. drill mast controlled by hydraulic cylinder, improve the efficiency diesel engine adopt the electric starter, to reduce the labor intensity.
Product Feature: 1. The rig is equipped with latest MW525 car transmission assembly, it owns 10 forward gears and 2 reverse gears, the gear speed design is reasonable to meet the needs of different drilling technology . 2. The drilling rig with large output torque and bearing capacity easy to handle a variety of underground accidents. Mechanical transmission structure is compact, spindle diameter is 96mm, bearing distance is big, drilling rig rigidity is good. 3. Hydraulic system controls the feeding pressure and speed to meet the needs of all kinds of formation drilling. The machine is equipped with pressure indicator at the bottom of the hole, it is easy to grasp the situation inside the hole. 4. This drilling machine is small size, light weight, good disassembly, good layout, flexible and reliable operation, easy maintenance.
Drilling Rig Description: 1.Construction drilling of the projects e.g. prospection, geotechnical investigation, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction; 2. Core drilling, mining exploration, Or exploration; 3. Small hole diameter water well drilling; 4. Geothermal pipe-installing for heat pump; 5. Small-diameter hole foundation piling drilling. Feature: ST-200 type drilling rig is a hydraulic feeding of low speed and high torque portable drilling rig. The railway, hydro power, traffic bridges foundation and other buildings in the engineering geological investigation. The geological core drilling, geophysical survey The small grout Confucians, blast hole drill The small water well drilling. The characteristics of drilling rig: 1. With the hydraulic feeding mechanism, improve the drilling efficiency, reducing the labor intensity of workers. 2. The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency convenient operation, safe and reliable. 3. Furnished with hole bottom pressure gauge pressure indicator, and easy to master the status inside the hole. 4. The handle centered, convenient operation. 5. The drilling machine has the advantages of compact structure, small volume, light weight, convenient move.
JK610 Crawler Mounted Blasting Borehole Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig borehole drilling machine In contrast with pneumatic drill rig, the air displacement of matched air compressor reduces 30% to 50%. JK610 internal combustion (electric) crawler mounted hydraulic DTH drill rig, is the latest updated product of "Sharp Sword" series, featuring its better performance, lower operation cost and humanized design. It adopts a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning. During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drilling rigs, JK610 consumes about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%. JK610 is equipped with dust collecting system, and wet type dust collector is optional as long as water is accessible on site. JK610 is mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK610 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4148mm Rod-changing length 3m Max. horizontal drilling height 3370mm Rotation rate 0-60rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 30° Power Yuchai 70KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mmÃ?2000mmÃ?2500mm Weight 6900kg Wired remote control Optional
304 stainless steel pipes, carbon steel pipes, galvanized steel pipes, seamless pipes, stainless steel pipes, used drill bits.
Product Feature: 1. With the hydraulic feeding mechanism, improve the drilling efficiency, reducing the labor intensity of workers. 2. The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency convenient operation, safe and reliable. 3. Furnished with hole bottom pressure gauge pressure indicator, and easy to master the status inside the hole. 4. The handle centered, convenient operation. 5. The drilling machine has the advantages of compact structure, small volume, light weight, convenient move.
Drill Bits
Drill Machine
Model 180 Weight(Kg) 4500 Dimensions(mm) 2700Ã?1550Ã?2350 Traveling speed(Km/h) 0~2.5 Engine model YC4D08 Power 58Kw/2400rpm Climb capacity(°) 20 Drilling depth(m) 180 Working pressure(MPa) 1.05-2.46 Air consumption(m3/min) 16-30 Length of rod(mm) 2000 Drill bit diameter(mm) Ï?110-202 Feed cylinder stroke(mm) 400 Feed power(N) 25000 Lift power(N) 50000 Speed of rotator(rpm) Min.speed 33 Max.speed 67 Lifting speed(m/min) Min.speed 8 Max.speed 26 Forcing speed(m/min) Min.speed 0-15 Max.speed 51 Rotation torque(N·m) 4200
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
1.keeping bracket is installed on the hoist to form a double wheel support structure, can withstanda strong blow. 2.Vertical box four couple of bearings positioned to ensure the rotary machine has a sufficient rigid response to gravel layer, the complex geological conditions. 3.This machine adopts national patent technology taper clutch,with charactristics of strong transmission torque, easy to operation, free to maintenance. 4.53x59 driving lever is adopted, high rigitidy, strong delivery torque.
ST-100 Drilling Rig widely applied in bore well drilling, underground core drilling, large-scale water conservancy projects, etc. It can work in soft soil, sediments, gravel and hard rocks. It has been exported our drilling rig to more than 20 countries, mainly Kenya, Ghana, Togo, Chili, Tanzania, Mexico, France, Canada, Lesotho, etc. Features of ST-100 Water Well drilling machine, borehole drilling machine, soil drilling rig machine: 1. Power can be electric motor or diesel engine as options. 2. Two or four wheels can be mounted on tractors, trailers or cars. Easy for outdoor and rugged place drilling. 3. Integrated mud pump, gearbox, hoist, etc. Not only saving land, but also easy to take and operate. 4. Different operation handles to control working. One person is able to operate it. 5. Easy to assemble and dissemble. One person is able to handle.
Drilling depth 200m Maximum open hole caliber 400mm End hole caliber 75mm Diameter of drill rod 50mm Drilling angle 90~75 Weight(not include power) 760kg Dimension 2750*950*1600mm 2. Vertical shaft Rotating speed 71,142, ,310,,620r/min Feeding stroke 450mm 3.Hoist Max. single line hoisting capacity 2400Kg Diameter of wire rope 13mm Volume of winding drum 35m Hug floodgate caliber 230mm Hug floodgate belt width 70mm 4.Mud pump Type Horizontal single urn twin-action Rate of flow 180L/min MAX. pressure 1.5MPa Working pressure 0.7MPa Diameter of water inlet tube 50mm Diameter of water outlet tube 45mm 5.Power Diesel engine 22HP, 2200r/min
1. ST-150 Rotary Borehole Water Well Drilling Rig Equipment with hydraulic feeding device, elevated drilling efficiency, reduced labor strength. 2.The ST-150 Rotary Borehole Water Well Drilling Rig Equipment is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown, high efficiency, safe and reliable. 3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole. 4. ST-150 Rotary Borehole Water Well Drilling Rig Equipment designed into compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
Drilling Rig Drilling diameter(mm) 75,91,110,130,150,300 Drilling depth (m) 200,150,100,70,50,30 Drill pipe diameter (mm) 42,50 Drilling angle(°) 90~75 Equipment size(L * B * H) 1730 * 860 * 1360 (mm) Rig weight (except engine) 700 Mobile device Moving length 350mm Leave distance 300mm Gyrator Spindle speed (four gear) (r/min) 115,230,505,1010 Spindle travel(mm) 450 Spindle no-load lifting maximum moving speed(m/s) 0.05 Spindle no load drop maximum movement speed(m/s) 0.067 Spindle maximum feed pressure(KN) 15 Spindle maximum lifting force(KN) 25 Spindle maximum output torque(KN� m) 1.5 Winch assembly Winch maximum lifting force (single rope) 20 Reel speed (r/min) 20,39,85,170 Reel circumferential speed(m/s) 0.172,0.345,0.738,1.476 Reel diameter(mm) 140 Wire rope diameter(mm) 9.3 Wire rope density (m) 40 Brake diameter(mm) 278 Brake band width (mm) 50 Oil pump Oil pump type YBC -20/125 Nominal pressure (Mpa) 12.5 Rated flow(ml/r) 20 Rated speed(r/min) 800-2500 Diesel engine or motor Diesel engine 1115 Rated power (KW) 16.2 Rated speed (r/min) 2200 Rated pressure(Mpa) 12.5 Motor type Y160M - 4 Rated power (KW) 11 Rated speed (r/min) 1460
Drilling and civil engineering bentonite is made by API and OCMA standardIt can be used as low solid phase mud in under ground civil engineering and drilling field  The specifications Item Mud  yieldM3T Filter  loss ML30min Yield  1b100ft2 Moisture  Wet Sieve Analysis0074mm gel strength HH01 18 12 3xPV 12 4 18 25 40 HH02 1218 1218 3xPV 12 4 15 20 30
Place of Origin.....................Germany Model Number........................TU1245 Weight ....................................3.5 Grade......................................HMS Material..................................Carbon Steel,1308 PDC cutters Shape.....................................ASH
HSS M35 5% Cobalt Centre Drill Bits
100% Cotton. Available Designs : Waffle weave, Leno, Checker, Snag free, Box Drill. Available colors : White, Beige, Sky blue, Brown, Orange, Gray, Pink. Size : 66" x 90", Weight : 2.60 Lbs/ piece.
