Concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Three models are available. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of í¬0. 074mm, the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. The equipment is patented in China.
Centrifugal Separator Centrifugal separator machine is in which two liquids of different densities are separated from each other. Solids may also be separated at the same time. Solid Liquid Separation machine Liquid-Liquid Separation Liquid-Liquid-Solid Separation The Centrifuges machine is specially used for the two phase and three phase separation. The two phase separation is to separate the suspended solid from liquid or separate two liquids which have the different specific gravity and are immiscible. The three phase separation is to separate the two immicible liquid phases and a phase of solid at the same time. Application of centrifugal separator 1. It could be used for food industry such as milk clarification, fruit juice clarification(solid flesh is taken out), purification of soy sauce and rice wine, slag clarification of tea drinks. 2. It could be used for clarifying all kinds of fuel oil and lubricating oil in moisture and impurites. Working principle The materials are transmitted to the heart parts of centrifugal separator, the inside of drum, under the strong centrifugal force, the mixed liquid pass through the intervals of discs. Center hole is interface, the liquid of higher density(heavy phase) move outward along discs, the heavy residues accumulate in the sediment area, the liquid of ligh density move inward and upward along the discs.
MH Disc Centrifuge Separator for starch processing Product Description Myande MH Centrifugal Separator is widely used in starch processing for starch milk pre-concentration, starch milk washing and concentration and, protein dewatering and concentration. Product Features And Characteristics 1. Unique hanging-type driving mechanism eliminating axle load on the shaft and bearings and thus effectively increasing working life. 2. Maximized disc and rotating drum sizes -- leading to increased capacity and ensuring excellent separation efficiency. 3. Large-size nozzles complete with cam-lock device minimizing blockage possibilities and enabling long-time continuous separation. 4. High precision dynamic balancing process adopted in rotor fabrication process ensuring smooth rotation and running. 5.Temperature sensors on each bearing providing real-time monitoring of bearing condition. 6. Vibration sensor on the main shaft assembly providing real time monitoring of operational parameters. Product Parameters Capacity:22-225m3/H
Myande mh centrifugal separator is widely used in starch processing for starch milk pre-concentration, starch milk washing and concentration and, protein dewatering and concentration. Functions and features: 1. Unique hanging-type driving mechanism eliminating axle load on the shaft and bearings and thus effectively increasing working life. 2. Maximized disc and rotating drum sizes -- leading to increased capacity and ensuring excellent separation efficiency. 3. Large-size nozzles complete with cam-lock device minimizing blockage possibilities and enabling long-time continuous separation. 4. High precision dynamic balancing process adopted in rotor fabrication process ensuring smooth rotation and running. 5. Temperature sensors on each bearing providing real-time monitoring of bearing condition. 6. Vibration sensor on the main shaft assembly providing real time monitoring of operational parameters.
Centrifugal Separator Machine Centrifugal separator is a machine in which two liquids of different densities are separated from each other. Solids may also be separated at the same time. Application of Separation Machine 1. It could be used for food industry such as milk clarification, fruit juice clarification(solid flesh is taken out), purification of soy sauce and rice wine, slag clarification of tea drinks. 2. Liquid Liquid Solid Separation machine could be used for clarifying all kinds of fuel oil and lubricating oil in moisture and impurites. Parameter(for decreasing fat) ModelCapacity(L/H)PowerDrum speed(RPM)Inlet Pressure(Mpa)Outlet Pressure(Mpa)Wight(kg)Dimension(mm) RPDR604S15002.288000-0.10.1-0.3280800x600x900 RPDB605S20003102000-0.10.1-0.3380990x930x980 RPDB607S30005.588000-0.10.1-0.34801120x910x1225 RPDB211S50001555000-0.10.1-0.310801200x1150x1420 RPDB413S800018.553000-0.10.1-0.313801250x1200x1500 RPDB415S120002251000-0.10.1-0.316801300x1300x1650 The capacity is only for reference, the actual situation depends on material properties of customers.
Sino-NSH-CP series is an oil purification system with thermal, filtering and centrifugal separation processing, with capacity from 1500 liter/hour to 6000 liter/hour. Sino-NSH-CP series is especially designed for the oil industry for the purification and recycling of liquid oil. This series is designed to overcome the harmful effects of oil contaminants, water and solid particles from fuel oil, lubricating oil and other mineral engine unit and land generator unit of power station so as to reduce wear of diesel engine and other machine, and prolong the serving life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.
Dear sir / madam, Good morning. Mab-102, mab-103, mab-104, mab-204, mab-205, mab-206, mab 207 Mapx-204, mapx-205, mapx-207, mapx-210, mapx-309, Mopx-205, mopx-207, mopx-209, mopx-210, mfpx-307. Whpx-505, whpx-507, whpx-508, whpx-510, whpx-513. Fopx-607, fopx-613, fopx 610, fopx 609 Decanters , heat exchanger plates large stock also available. Mitsubishi :- Sj 700 , sj 50 f, sj 80 fh, sj-25t, sj-15t, sj-16t. And can source any other model on demand. Westfalia :- Osa-7, osa-35, osa-20, osd-18, osc- 4 And we can also source other models on demand. Hope to hear from you with inquiries. 12 pcs.
Alfa Laval Mib 303s-33 Disc Centrifuge Oil Separator. Product No. 881176-10-01 Speed 7500 R/min Supply Voltage 1-50/60 Hz 230v Rated Current 4a Manufacturer Alfa Laval Used In Excellent Condition, Comes From Marine Use. Worldwide Sea Freight Shipping Requires 30-45 Days. Combined Shipping Is Possible For Multiple Purchase. Please Contact For Details.
The Centrifuge can be used in various fields where various types and shapes of contrifuges are needed, such as in the sludge from civil engineering works and in the chemical, food processing, and steel industries.
Main Feature: The milk disc centrifuge produced by Shenhzou has the functions of impurity milk, degreasing and fat content standardization. The machine is called the three separators in the dairy industry. It can realize liquid-liquid-solid separation. it can be operated manually or automatically or remotely. This machine is widely used for many industries, such as dairy, beverage, pharmacy, chemials, petrol, metallurgy and biology, etc. Application: 1. Beverage: Wine, tea, coffee and beer. 2. Juices: Vegetable juices, various kinds of fruit juices 3. Vegetable oil: Coconut oil, colza oil, cotton seed oil, core oil, palm oil, soybean oil, peanut oil, rice oil, sesame oil, safflower oil 4. Animal oil: Fish oil and other animal oil. 5. Mineral oil: Fuel oil, diesel oil, lubrication oil, transformer oil and waste oils. 6. Dairy Milk: Milk degrease 7. Fermented liquids: Bacterial or fungi mass after fermentation Working principle: Disc centrifuge the bowl will be driven by the main motor by the friction clutch and screw gear pair to rotate highly around the main shaft. Stock liquid flows from the center charging inlet on the top to the bottom through the charging pipe. And then passes through disc seats to the bowl's space. The bigger gravity solid phase particles in the stock liquid is settled down to the bowl's wall by the centrifugal force and then under the control of the side bowl drained out of the residue outlet but liquid phase is fully settled down to the bowl wall by the centrifugal force field and then under the control of the side bowl it is drained out of the residue outlet but liquid phase is fully settled down to the center along the discs to drain out by the centripetal pump.
Olive Oil Separation Stainless Steel Decanter Centrifuge Olive Oil Separation Stainless Steel Decanter Centrifuge is used for solid-liquid-liquid separation, namely one kind of solid phase (with largest specific gravity ) and two kind of immiscible liquid phase with different density. The conveyor rotates in the same direction as the bowl, but at a different speed, the material is fed into the bowl through a stationary feed pipe. Centrifugal forces cause instant sedimentation of the solids on the wall of the bowl, while two liquid phases forming light liquid phase layer and heavy liquid phase layer. Scroll conveys the solids towards the conical end of the bow, and out of centrifuge from solid discharge port. The light liquid phase then is discharged out continuously through the overflow port at the large end of the bowl, and the heavy liquid phase will be discharged out through the centrifugal pump large end of the bowl, thus realizing the three-phase separation. When you need to separate solid / liquid mixtures with high solids content, you can choose a decanter centrifuge. In contrast to chamber filter presses, these solid vortex centrifuges or decanter centrifuges operate continuously. High centrifugal forces separate finely divided solid particles from the suspension.
Description The centrifugal concentrator, a kind of gravity separation equipment, is suitable for the separation of heavy medium minerals that have enough specific gravity differences. STLB concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Since 1985, three models have been developed. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0.074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times. Working Principle Water jacket centrifugal concentrator is forced by centrifugal force increases mineral centrifugal acceleration, the minerals in the centrifuge spins a few times to get the equivalent in gravity state, then the proportion of mineral difference is magnified several times, Together with recoil mineral water to prevent compaction, thereby fine, mineral beneficiation achieve good results. Main models: D20 with 1-2t/h capacity D30 with 2-7t/h capacity D60 with 15-30t/h capacity D80 with 30-70t/h capacity D100 with 60-100t/h capacity
Place of Origin: China Classification: Laboratory Centrifuge Brand Name:OEM Model Number: V-GTM12 Max. Speed: 12000rpm Max. RCF:15800xg Max. Capacity:24pcs Capillary*75mm Time Range: 0~99min59s RPM/RCF Convert:Yes Noise (dB)â?¤ 55 Temperature Normal Acc/Dec:10 Kinds Speed Accuracy: �±20r/min Voltage(V/Hz):AC 220V/110V 50HZ/60HZ High speed micro 24capillary hematocrit blood separation lab centrifuge Micro Hematocrit Centrifuge 1.Frame is 3 tiers protection steel jacket, and with the stainless steel chamber, inside protective steel lagging which is simple-compact,light-weight and low noise. 2.Adopt advanced CPU control system realizing microprocessor control, it can control rotate speed, and relative RCF, LCD display which indicates the current speed, time and RCF. 3. Brushless inverter motor with simpler construction,more reliable performance,longer life and quietly running. 4.With many kinds of rotor for your choice. 5.Over speed and imbalance protection, the centrifuge will stop automatically when the above situation happened, with short spin function. 6.Emergency locks under the bottom of the centrifuge which help you open the lid when power off. 7. It is consistent with CE security certification and ISO9001 quality certification. Company Profile
1)This machine is directly driven by the high speed motor, has the advantages of energy saving, durable and convenient repair.Use this machine the fat content in skim milk can be reduced to 0.02%-0.05%. 2)9ND50 vertical milk separator is disc type centrifugal separator, the milk is separated into two parts cream and skim milk by centrifugal force generated by high speed rotating. Important parts of the machine are made of high quality material, and after heat treatment, durable. All the milk and contact parts are stainless steel or tin material, has good corrosion resistance.
the disc stack separator separates solids and one or two liquid phases from each other in one single continuous process, using extremely high centrifugal forces. When the denser solids are subjected to such forces, they are forced outwards against the rotating bowl wall, while the less dense liquid phases form concentric inner layers. The area where these two different liquid phases meet is called the interface position. This can be easily varied in order to ensure that the separation takes place with maximum efficiency. Inserting special plates (the "disc stack") provides additional surface settling area, which contributes to speeding up the separation process dramatically. It is the particular configuration, shape and design of these plates that make it possible for a disc stack centrifuge to undertake the continuous separation of a wide range of different solids from either one or two liquids. The concentrated solids phase formed by the particles can be removed continuously, intermittently or manually, depending on centrifuge type and the amount of solids involved in the specific application. 2-phase separation disc stack centrifuge separator
1. Specification: This centrifuge has three rotors adapted to the parameters of the centrifuge, two swing rotors, one fixed rotor Capacity: 16PCS Max speed: 2400rpm Max RCF: 1520 xg Capacity: 4PCS Max speed: 1500rpm Max RCF: 530 xg Capacity: 8PCS Max speed: 1500rpm Max RCF: 430 xgã?? 2. Features: For fat purification, there are three types of rotors for your choice, the maximum speed can reach 2400 rpm. Steel body frequency conversion brushless DC motor Automatic balance, with noise reduction system Horizontal centrifugal metal rotor, oxidation process treatment, turret rotor can be sterilized by high temperature and high pressure. Centrifugal observation hole, noise reduction concave cover, observable state during centrifugation, airflow guide design, effectively reduce noise. LCD program display panel, intelligent control system, multi-specification setting, memory storage program, free adjustment of rotational speed, centrifugal force and time. 3. Warranty: PlenMED will also provide you with high-quality after-sales service, such as centrifuge use guidance service and software debugging service. In addition, a 20-month warranty period will also be included. If there is a quality problem, you can replace i for free, and the service outside 18 months is to replace parts for you at the lowest price for any part problem. 4. Certifications: As one of the best laboratory centrifuge manufacturers in China, PlenMED has passed CE and ISO9001: 2008, ISO13490 and other certifications. 5. Whether you are a centrifuge distributor, retailer, or a customer who uses centrifuges, PlenMED will be your best choice. 6. Please inquire with us immediately!
GF centrifuge separatoris mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.
Main features: 1). Qualified and ideal laboratory centrifuge; 2). Adopts advanced microprocessor system for accurately controlling speed, time, temperature and RCF value; 3). Driven by free-maintenance frequency conversion motor for high speed accuracy; 4). CFC free refrigerated system with double circuits of heating/cooling for high temp. accuracy; 5). Digital display; 6). 30 programs can be edited and stored; 7). 10 grades of acc/dec speed for option; 8). Automatic identification system of rotor for avoiding over-speed; 9). Protections of over-speed, over-temperature, imbalance and automatic diagnosis system. Standard wood case or waterproof carton.
Main features: 1). Microprocessor control, brushless frequency conversion motor for no powder pollution, low noise and vibration, imported converter, various available rotors are also available for choice; 2). Adopts compressor units from Tecumseh (French company) with the interface of CANRS485 (RS232) for realizing network control and fast cooling; 3). Touch panel, LCD display, programs can be edited and stored for normal operation, automatic identification system of rotor; 4). Acceleration/deceleration time can be set freely, RCF value can be calculated automatically, double circuits of heating/cooling for temperature control; 5). Protections of over-speed, over-temperature, imbalance and safety lock; 6). Ideal for blood separating. Technical parameters: 1). Model: HR26MC/HR24MC; 2). Max. speed: 26000r/min/24000r/min; 3). Max. RCF: 75800xg/58500xg 4). Max. capacity: 3000ml 5). Speed accuracy: 30r/min 6). Temp. accuracy: 1C 7). Temp. range: -20C~+40C 8). Time range: 0-23h59min 9). Acceleration/deceleration speed: 0-9 grades 10). The shortest acc. time: 1min30s 11). The shortest dec. time: 1min40s 12). Cooling system: Imported compressor unit, CFC free 13). Motor: AC brushless motor 14). Noise: 65dB(A) 15). Power supply: AC220v 50Hz 30A 16). Dimension: 710,820,1200mm(L,W,H) 17). Weight: 260kg. Standard wood case.
Main features: 1). Microprocessor control, driven by DC brushless motor. Intelligent interface, touch panel, digital display, and programs can be edited or stored for the best centrifugal effect; 2). Automatic identification system of rotor for avoiding over-speed; 3). Protections of over-speed, imbalance, electric lock and automatic diagnosis system for safety of user and machine; 4). Ideal for medical and lab use. Technical parameters: 1). Model: HB16-W 2). Max. speed: 16000r/min 3). Max. RCF: 17800xg 4). Time range: 0-99min 5). Motor: Microprocessor control, DC brushless motor 6). Noise: 65dB(A) 7). Power supply: AC220v 50Hz 2A 8). Dimension: 330 210mm(LWH) 9). Weight: 10kg. Standard wood case or waterproof carton.