Carbon Brush Kit H H Cbz Shinee Unicorn Suppliers and Manufacturers

Part No 9001

Part No 9002

Part No 9004

CHM REMOVAL BLOCK (Heavy Metal Removal) - Heavy metal (HM) is any metallic chemical element are highly toxic for both animals and human beings, and can be bio-accumulated through biological chains and are non-biodegradable and persistent. Their toxicity may occur due to industrial emission that contaminates waterways, nearby streams and rivers, contamination of irrigation water, the application of fertilizer and metal-based pesticides, harvesting process, transportation, storage, or sale. Elements, such as Cadmium and Chromium, are considered carcinogenic, while Iron, Copper, Manganese, Zinc, and Nickel are considered essential trace elements. Arsenic is also another heavy metal which is available in almost 70% bore well water. Therefore, it is essential to purify the water to make it potable. The conventional methods for heavy metal removal from waste water which includes chemical precipitation, reverse osmosis, and solvent extraction are expensive. Adsorption on adsorbent such as active carbon or modified active carbon is an alternative method, because it is cost effective and simple to design. Size & Diameter can be customised as per buyer's requirement.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Part No 9003

Part No 9005

Potassium Acetate, E261, CAS no.127-08-2, a potassium salt of acetic acid, white crystal powder. Potassium Acetate manufacturing process via chemical synthesis, potassium hydroxide or potassium carbonate and acetic acid as raw materials. Potassium Acetate is used as a food preservative and acidity regulator to help prevent bacterial growth. It is better than Sodium Acetate to avoid Sodium. Also used as a deicer instead of chloride salts such as calcium chloride or magnesium chloride. As an experienced Potassium Acetate manufacturer and supplier, we has been supplying and exporting Potassium Acetate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Potassium Acetate powder food grade Specification Product Potassium Acetate CAS 127-08-2 INS 261 E261 i Structure Molecular formula C2H3KO Properties Colorless or white crystalline powder.Slightly acid taste,easy deliquescence. Quality Specifications Standard Item BP2012 ACS Grade USP35 EP7.0 Content 99.0% 99.0% 99.0% 100.5% (Dry basis) 99.0% 101.0% (Dry basis) pH test 7.5 9.0 (1 in 20 soln) 6.5-9.0 5% solution at 25.0 7.5 8.5 (5% Solution) 7.5-9.0 Loss on drying 8.0% (150, 2 h) 1.0% 3% Heavy Metals 2 mg/kg 5ppm 0.002% 4ppm Sodium 0.03% 0.5% Insoluble matter 0.005% Chloride(Cl) 0.003% 200ppm Phosphate(PO4) 0.001% Sulfate(SO4) 0.002% 200ppm Iron(Fe) 5ppm 20ppm Calcium(Ca) 0.005% Magnesium(Mg) 0.002% Reducing substancespassed test Aluminum salts1ppm

Specification: Ash Content (mass %) 0.01 Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 C Specific Gravity a 25 C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36,000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 18 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15

Part No 9006

Part No 9007

Application Suspected case test in epidemic area Early test of fever clinic and CDC Screening of primary medical institutions Inspection of floating population in public areas Performance Characterisitics Sample tyep: nasal swab Time to result: 15-20 minutes Sensitivity: 97.70% Specificity: 99.84% Accuracy:98.97% Layperson study statistics 99.84% of non-professionals carried out the test without requiring assistance 99.82% of different types of results were interpreted correctly. Parameters: A Short Test Time: 15 mintues B Accuracy: More than 98.1% C Sensitivity: 96.4% Specificity: 100% D Easy operation: Nasal Swab E One Step solution F Lower cost with high efficiency G Package: 1 Test/Kit, 5 Tests/Kit, 25 Tests/Kit H It can detection for Omicron Virus Price and Minumum Quantity Price FOB in USD: 1.5Minimum Order Qty: 500000 Pieces Production Capacity: 100 Million Boxes Per WeekPackaging: 1,5,20,25,40,100,200 Pcs Per Box Sample: Available. Sample Cost Born By Buyer Product Model And Origin Brand: jwfModel: jwf01 Seller Code: Jwf Standards: Ce Competitive Advantages Lower cost with high efficiency Detection for omicron virus Easy operation Short test time Other Details Omicron covid test kit Covid test kit Omicron test card Covid test card

We are direct manufacturer and exporter of Crud and Refined Rapeseed oil, olive oil, sunflower oil, soybeans oil, jatropha oil, canola oil, Palm oil, virgin coconut oil, Corn oil,Edible oil, used vegetable cooking oil.We need reputable buyers ready to buy and enter into long term yearly, monthly or weekly contracts with our company. We will highly welcome buyers who are willing to travel or send representatives. We would like our first time clients to visit us for viewing, purchase, business discussion, shipment and others, we are happy to welcome you in any of our branches. Contact us to start doing business with us. Sunflower Oil,Corn oil,Soybean Oil,Olive oil,Jatropha oil,Sesame Oil,Palm oil,Coconut oil,Canola oil,Rapeseed Oil,Edible oil,Peanut oil. JATROPHA OIL SPECIFICATION Free fatty acids 3, 5% Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 C Specific Gravity @ 25â??C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36, 000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 16 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01

Comrade Comrade from THE HOLISTIK, it's impressive to know more about the thoughtful design and functionality of COMRADE Backpack. The balance between style and functionality, with the sleek front pockets and a comfortable handle, is undoubtedly appealing. The dedication to practicality shines through with the interior division into two main compartments, providing a designated space for a 15-16" laptop - a key feature for those on the move. The high storage capacity, thanks to the numerous pockets, is a practical solution for organizing and carrying daily essentials. The COMRADE Backpack is designed with the user in mind, ensuring a fully functional and versatile experience. Here's to a backpack that not only complements one's style but also enhances the ease of daily activities. DESIGN INSIDE : Briushable sir mus straulder straps * Mesh side pocket * Padded bottom panel * 2 zipper side pockets * 2 front pockets * 1 woth snap buttons and with zipper * 2 main compartnets * 1 for laptop fits in 17 inch * 1 compartment with organizer for your essential documents * Size: H 47 L 34 W 14 cms * Capacity: 22 Liters

Urea, a nitrogen-rich compound with the chemical formula CO(NH), plays a significant role in the oil and gas industry, Urea, also known as carbamide, is a highly soluble organic compound. It is synthesized on a large scale from ammonia and carbon dioxide and is primarily used in fertilizers, which accounts for about 90% of its global production. Chemical Properties Molecular Formula: CO(NH) Molar Mass: 60.06 g/mol Appearance: White, crystalline solid Melting Point: 133C (271F) Solubility: Highly soluble in water, forming a neutral solution Industrial Production The production of urea typically involves the following steps: Ammonia Production: Sourced primarily from natural gas (methane) through the Haber-Bosch process. Reaction with Carbon Dioxide: Ammonia reacts with carbon dioxide to produce ammonium carbamate, which is then dehydrated to form urea and water:2 3 2+ 2NH 3 +CO 2 NH 2 CONH 2 +H 2 O Diesel Exhaust Fluid (DEF): Urea is used to reduce nitrogen oxide (NOx) emissions from diesel engines. DEF, a mixture of 32.5% urea and 67.5% deionized water, is injected into the exhaust stream of diesel engines. Oil Drilling Fluids: Urea can be used in drilling mud formulations to enhance the efficiency of the drilling process. Chemical Manufacturing: Urea serves as a feedstock in the production of various chemicals such as melamine and urea-formaldehyde resins. Desulfurization: It is used in processes to remove sulfur compounds from petroleum products. Market Dynamics Demand: The demand for urea is largely driven by its use in agriculture. However, industrial uses, including those related to the oil and gas sector, contribute significantly to its market. Pricing: Urea prices are influenced by the cost of natural gas, the primary raw material, and global agricultural demand cycles and NEGOTIABLE Environmental Impact: While urea itself is not hazardous, its overuse in agriculture can lead to environmental issues such as eutrophication. Handling and Storage: Urea should be stored in a cool, dry place away from moisture, as it is highly hygroscopic. It is considered non-toxic, but proper safety measures should be followed to avoid dust inhalation or skin contact. Logistics: Efficient transportation and storage solutions are vital to maintain urea quality and manage costs. Regulations: Compliance with international and local regulations regarding chemical handling, safety, and environmental impact is crucial. Market Opportunities: Identifying and targeting markets with growing industrial and agricultural demand for urea can enhance profitability. Origin: Russia/ Kazakhstan. Contact us for more information

Basic Info. Model NO. LFP51.2-300 Electrolyte LiFePO4 Color White Usage Solar/ Marine/ Telecom / Electric Mobility Warranty 3 Years OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 720*260*580mm Transport Package Wooden Case Specification 120kg Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description Factory Wholesale Deep Cycle 51.2V300ah Lithium Ion Batteries LiFePO4 Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery. Product Parameters Nominal Voltage 51.2V Nominal Capacity 300Ah Energy 15.36KWh Combination mode 16S1P Cycle Life â?¥6000 Cycle, 80%DOD, 25�ºC BMS conï¬?guration 16S150A Operating voltage range 41.6V~59.2V Rated charge and discharge current 150A Peak current 160A Continue @170A 3s Rated charging and discharging power 7.68Kw Peak power 8.192Kw Continue @8.704Kw 3s Short-circuit current 0.762Ka@100us Communication mode CAN, RS485 Parallel number Recommend 6 in parallel(Maximum support 16 in parallel) Remote data Bluetooth optional/Wiï¬? Weight 120kg Dimensions (L*W*H) mm 720*260*580mm Operating temperature Charging: 0�ºC~+50�ºC / Discharge: -10�ºC~+60�ºC Relative humidity 0~95% Storage temperature

Basic Info. Model NO. LFP25.6-100 Electrolyte LiFePO4 Color White Usage Solar/ Marine/ Telecom / Electric Mobility Warranty 3 Years OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 750*145*250mm Transport Package Carton Specification 28kg Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description 25.6V100ah Renewable Energy Lithium Ion LiFePO4 Battery Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery. Product Parameters Nominal Voltage 25.6V Nominal Capacity 100Ah Energy 2.56KWh Combination mode 8S1P Cycle Life â?¥6000 Cycle, 80%DOD, 25�ºC BMS conï¬?guration 8S100A Operating voltage range 20.8V~29.6V Rated charge and discharge current 100A Peak current 100A Continue @120A 3s Rated charging and discharging power 1.28Kw Peak power 2.56Kw Continue @3.072Kw 3s Short-circuit current 0.225Ka@100us Communication mode CAN, RS485 Parallel number Recommend 6 in parallel(Maximum support 16 in parallel) Remote data Bluetooth optional/Wiï¬? Weight 28kg Dimensions (L*W*H) mm 750*145*250mm Operating temperature Charging: 0�ºC~+50�ºC / Discharge: -10�ºC~+60�ºC Relative humidity 0~95% Storage temperature