Champion Blue Flame Synthetic Blend series engine oils are designed to provide industry-leading performance to meet the needs of the next generation of heavy duty engines. Increased power density, reduced oil volume and extended drain intervals place unique demands on engine oils to control oxidation by-products, sludge and deposits. Due to higher shear stress and lower viscosity minimums for engine oils, only oils with the highest wear protection and viscosity stability can maximize the performance and life of advanced diesel engines. Oxidation Control- Champion Blue Flame Synthetic Blend series engine oils take oxidation resistance to another level, allowing users to achieve longer drain intervals, reduce maintenance and downtime, and extend engine life. Controlling oxidation, corrosive acids, sludge and varnish precursors allows for extended drains and minimized wear even under the most extreme conditions. Synthetic base oils provide reduced volatility and oil consumption, further reducing the build-up of sludge and varnish. Oxidation lower than OEM limits in over 60,000 mile on-highway and 600 hour off-highway drain intervals.â?¢ Proprietary additives and synthetic base oils have shown up to 80% reduction in Volvo T-13 oxidation. Wear Control- Champion Blue Flame Synthetic Blend series engine oils keep your engines going longer by reducing engine wear, preventing high temperature corrosion and controlling abrasive soot contamination, even while allowing for improved fuel economy and lower total cost of ownership. Synthetic base oils improve cold-flow properties and reduce start-up wear, leading to extended engine life and performance. Over 75% less pushrod wear, 85% less injector screw wear and 70% better resistance to filter-plugging than CJ-4 oils in proprietary, extra-severe engine testing. Outperformed corrosion bench testing limits by 70% for copper and over 98% for lead and tin.â?¢ Cold-pumping viscosity 72% lower (SAE 15W-40) and 69% lower (SAE 10W-30) than J300 limits, providing excellent lubrication and wear protection at start Part# 4358N/4 4/1 Gal. Part# 4358U/2 2/2.5 Gal. Part# 4358AN 55 Gal.
Applications: Turbo Special 15W-40 API CI-4 Plus engine oil is based on synthetic formula specially designed for latest turbo charged low emission high performance diesel engines to ensure superior performance. Performance level: API CI-4 Plus, API CI-4, CH-4, CG-4, CF, API SL/SJ, ACEA E7-04, E2-96, CAT ECF-1A, CAT ECF-2, Cummins 20071-78, DDC 93K214, Global DHD-1, Mack EO-N PP03, MAN 3275, MB 228.3, MTU Type 2 & Volvo VDS-3 Features & Benefits: Exceptional thermo-oxidative stability reduces engine deposits, sludge build-up and oil thickening Outstanding soot handling capability minimizes soot related viscosity increase and wear High shear stability maintains viscosity at elevated temperatures leading to improved wear protection and reduced oil consumption Superior protection against corrosive wear extends the life of engine components Excellent TBN retention helps to reduces acid formations Pack size: 1L,5L,6.5L,7L,7.5L,8.5L,10L,15L,20L,55L,210L Meets or exceeds the specifications: API C-4 Plus, API CI-4, CH-4, CG-4, CF, API SL/SJ, ACEA E7-16. E2-96, CAT ECF-1A, CAT ECF-2, Cummins 20071- 78, DDC 93K214, Global DHD-1, Mack EO-N PPO3, MAN 3275.MB 28.3, MTU type 2 & Volvo VDS-3 Recommendation: Recommended to use in HCV�¢??s, LCV�¢??s, MUV�¢??S. Vehicles with diesel engine from Mahindra, TATA, Ashok Leyland, Eicher, Escort, AMW, Volvo, MAN, Mercedes. Maruti, Hyundai, Ford, Toyota, Skoda & in vehicles requiring CI-4, CH-4, CG-4, CF-4 oils. This oil is compatible with heavy duty diesel engines used in constructions, mining, agriculture, tractors & other off-road applications.
* Packing Unit: 1L/12Box * Type: Premium Diesel Engine Oil * Features: - Provides excellent engine protection and satisfaction - Maintains superior engine performance - Promotes superior engine cleanliness - API CI-4, ACEA E7 Certified * Available Capacities: 1L, 4L, 6L, 20L, 200L (For MOQ and pricing, please inquire) * SAE Grade: 10W-40
* Packing Unit: 1L/12Box * Type: Top Quality Diesel Engine Oil (EURO 6) * Features: - Optimized for EURO 6 standards - Reduces emissions - Maintains high engine performance output - API CK-4, ACEA E11 / E7 certified * Available Capacities: 1L, 4L, 6L, 20L, 200L (For MOQ and pricing, please inquire) * SAE Grade: 10W-40
Frozen chicken, pork, frozen beef, chicken feet, chicken paws, chicken, sunflower oil, soybean oil, canola oil, red kidney beans, beans, white beans, lentils, chickpeas, chana dal, green mung beans, black eye beans, sesame seeds, soybeans, yellow corn, white sugar, compressor scrap, scrap, used electric motor scrap, copper wire scrap, oranges, fresh fruits, lemons, mandarines, limes, apples, pears, guavas, soda ash, caustic soda, uht milk, milk powder, peanuts, groundnuts, ldpe, hdpe, lldpe, polyvinyl chloride (pvc), polystyrene (ps), polypropylene (pp), polycarbonate (pc), polyphenylene oxide, used cooking oil, used engine oil, virgin granules, used blue drum scrap, recycled granules, bitumen, beef omasum, deer antlers, alfalfa hay.
We are supplier and exporter of Diesel. We have various types of Diesel. Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
Product Description - Is one of a number of different grades of diesel oil Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers. Product origin - Middle East and USA Key Specifications/Special Features - D2 Diesel Gas Oil is used in most types of diesel powered engines Minimum Order Size and Packaging details - "First initial trial shipment of 10,000 MT, followed by a 12 month contract, with monthly shipments between 25,000 to 100,000 MT per month. NO SPOT CONTRACTS ARE ACCEPTED "
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
Copper cathode, copper wire scrap, sunflower oil, soybeans seeds, used rails, palm oil, urea 46% nitrogen granular, white corn, sisal fiber, cashew nut, sesame seed, hardwood charcoal, a4 paper icumsa 45 sugar, wood pellets, paper scrap, used engines, yamaha cardboard engines, pet bittle scrap, almond nuts, pistachio nuts, battery scrap, computer scrap, phone scrap, beef meat, goat meat, lamb meat, wet salted cow, cocoa, arabica coffee.
1. Characteristics - Appearance Method - Visual Unit - Result - Bright & Clear 2 . Characteristics - Color Method - ASTM D 1500 Unit - ASTM Color Result - 2.5 3 . Characteristics - Density @ 15.6 Method - ASTM D 1298 Unit - G/CM3 Result - 0.868 4 . Characteristics - Kinematic Viscosity @ 100 Method - ASTM D 455 Unit - MM2/S Result - 15.92 5 .Characteristics - Kinematic Viscosity @ 40 Method - ASTM D 455 Unit - M2/S Result - 107.38 6 . Characteristics - Viscosity Index Method - ASTM D 2270 Unit - Result - 158.47 7. Characteristics - Pour Point Method - ASTM D 97 Unit - Result - -6 8 . Characteristics - Flash Point Method - ASTM D 92 Unit - Result - 192
Petrochemical : base oil / furnace oil / mho / cst range/ used engine oil / bitumen, Bio diesel : used cooking oil / specially blended soybean / canola oils for industrial use (insultating oil) / cnsl (cashe nut shell liquid) Automotive & industrial oils & lubricants (manufactured to every specific blend / brands ) Waste food solutions .Our logistics team can provide with prices based on ex tank in uae, fob in uae seaports and cif to the destination port of the buyers. we can arrange to supply in flexitanks (20ft container), ibc tanks and drums (208 litres)
Our commitment to blending / packing of lubricants and greases as per iso standards. All our products are blended at iso certified plants, at whichever location the products may be blended. Product range 1- petrol engine oils 2- tractor fluids 3- transmission fluids 4- marine engine oils 5- industrial fluids 6- diesel engine oils 7- coolant & anti freeze 8- brake fluids Packaging - ctn 12x1 l - ctn 4x4l - ctn 4x5l - pali 20l - drum 208l - iso tanks or flexi tanks Private labeling available Manufactured at iso certified plants Meet & exceed various api certifications Oem approvals Please don't hesitate to contact us.
Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes
Product: MCH Diesel XL 15W-40 Description And Recommendation: Premium quality high performance, multi grade diesel engine oil manufactured from superior high quality base stocks, recommended for all types of advance diesel engines. Viscometric / Consistency SAE 15W-40 Standards - AP - MB 228.3 - MAN M 3275 - MACK EO-M PLUS - VOLVO VDS 3 - CUMMINS 20076/77 - ACEAA3/B3-98/E3-96 Issue 2
Product: MCI Diesel Xtreme 15W-40 Description And Recommendation: Top-tier, heavy duty, multi grade diesel engine oil. This product is having higher soot holding capacity & therefore can offer the highest drain interval. Viscometric / Consistency SAE 15W-40 Standards - API CI-4 Plus /Cl-4 /CH-4 / CG-4 /CF / SL - MB 228.3 - MAN M 3275 - VOLVO VDS 3 - CUMMINS 20076/77/78 - ACEA E7-04; E2-96 - CAT ECF-1A; ECF-2
Product: MCF Diesel Ultra 15W-40 Description And Recommendation: Diesel engine oil with quality base stock fortified with a shear stable viscosity index improver, and high performance, recommended for all types of heavy commercial vehicles & DG sets. Viscometric / Consistency SAE 15W-40 Standards - AP - IS 13656 Type E-DL 5