Glass bead blasting involves using spherical glass media to give a uniform finish on components surfaces at high pressure. On the other hand, the traditional sandblasting technique uses silica sand to confer surface finish on the material. Sandblasting is much quicker than bead blasting.
Shot blasting usage glass beads NO10 price The glass beads,composed of Si,Na and Ca,are broken and calcined by high temperature after which the said microspheres are obtained.With properties of the high roundness rate,better hardness,excellent anti-friction and direct reflect light .They are widely applied in the fields of plastic rubber,abrasion ground,blast derusting,road-reflect dope and handicraft lamp,etc. Size:NO 10 SiO2: 65%min Na2:14%max CaO: 8%max Packing: 25kg pp bag, 40bags into 1 jumbo bag
1) Product Introduction Glass beads for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be� blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity. 2) Product Specification Main products specification for sandblasting according to following table: No. Diameter(um) Corresponding sieve size 1 850-425 20-40 2 425-250 40-60 3 250-150 60-100 4 150-105 100-140 5 105-75 140-200 6 75-45 200-325� You can choose different size glass bead between 45um-850um according to different function. � High Strength Glass Beads (for Blasting) With compressed air as implicit power, this product is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing. Other purposes of the products are as follows: 1.� Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion. 2.� Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc. 3.� Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering 4.� Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts 5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair 6.� Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening aggrandizement and polishing of textile machinery parts. � High Strength Glass Beads for blasting Type Mesh Grain Size �¼ m 30# 20-40 850-425 40# 30-40 600-425 60# 40-60 425-300 80# 60-100 300-150 100# 70-140 212-106 120# 100-140 150-106 150# 100-200 150-75 180# 140-200 106-75 220# 140-270 106-53 280# 200-325 75-45 3) Technical references Appearance: Clean and transparent, no visible bubbles and impurity. Density:2.4-2.6g/cm3 Hardness:6-7(Moh's) Spherical beads: 75% SiO2 content: 72% 4) Package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25±0.2kg. 2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is paper-plastic compound bag to prevent leak or damp. The net weight of each is 25±0.2kg. 3.According to clients' requirement.
We are iso 9001:2008 company, all of our products can pass heavy metal testing. We have bs en 1424, 1423; bs 6088 class a, classb; aashto type i, type ii glass bead for road marking Package in 1200kg bulk bags or 25kg bags
In order to improve the safety of driving at night, the glass beads have been used in the road marking lines. When the lamp shines on the marking line, the ray of lamp can be reflected parallely by the glass beads so that the driver can see the road clearly thus increasing the safety. The life span of road marking line has been extended by mixing different size of glass beads. When the bigger glass beads have been worn down, the smaller ones still have refractive effect. The glass beads as refracting materials can be classified into two kinds class a (premix) and class b (drop on). We usually premixed the glass beads of class a into the paint for road marking to have well refraction performance, which will improve driving safety. The glass beads of class b are normally dropped on the painted road markings to improve refracting effect. Main composition: sio2¿cna2o¿ccao Refractive index: í² 1.5 (normal glass beads) í² 1.6-1.7 (mineral glass beads) Color: colorless transparent (or white) Shape: spherical particles, fluidity Size range: 75-2800ª8m (according to customer's requirements specifications) Roundness: í² 85% (according to customer's requirements specifications) Density: 2.4-2.6g/cm3 Coating: according to customersí» requirements 1.To use double pocket packaging, inner bag of polyethylene film, the thickness of not less than 0.5mm; outer plastic woven bag, to prevent leak or damp. Net weight 25 ía 0.2kg. 2.To use double pocket packaging, inner bag of polyethylene film, the thickness of not less than 0.5mm; outer plastic woven bag, to prevent leak or damp. Net weight 1000 ía 8kg.
1) Product Introduction With the advantages of smooth surface, even size, high hardness, wearable and stable, widely used as disperser, grinding media and filler materials in day, paint, ink and chemical industry. 2) Product Specification Main products specification for grinding according to following table: No. diameter(mm) corresponding sieve size 1 0.8-1.0 20-18 2 1.0-1.5 18-14 3 1.5-2.0 14-12 4 2.0-2.5 12-8 5 2.5-3.0 8-7 6 3.0-4.0 7-6 7 4.0-5.0 6-4 8 5.0-6.0 4-3 You can choose different size glass bead between 0.8mm-6mm according to different function. 3)Technical references A: Appearance: Clean and transparent, no visible bubbles and impurity. B: Specific gravity:2.4-2.6g/cm3 C: Hardness:6-7 D: Compressive strength:1200N 4)Package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25�±0.2kg. 2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic wiven bag to prevent leak or damp. The net weight of each is 1000±8kg. 3.According to clients' requirement.
Glass beads for road marking 1.Improve the road marking line contrary reflection function. When driving at night, the lamp shines on the marking line with glass bead in it, the ray of lamp is reflected back parallely. So the driver can look at the road clearly and drive safely at night. 2. Products according to international standard include: jt/t 446-2001, english bs6008, korean, ks and american aashto etc. 3. You can choose different size glass bead between 50um-1180um according to different function. 25kg/bags, 40bags/pallet, using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp.The net weight of each bag is 25f+0.2kg.
The raw materials are made of bao, tio2, rare earth, etc. They have the characters of melting roundness nearly 100%, refractive index 1.9-2.4, small volume, prone to adhere to surface of road marking and clothing. The patented coating materials and coating processing make our products be more transparent and increase refractive index. Its refractive effect is 6 times better than the common glass beads. A perfect circle, coupled with the high refractive index of light refraction brought about an excellent reflector. It is core material for producing reflective fabric, reflective foil, highlight class film, reflective clothing, reflective ink, reflective paint, and other new composite material. It can be widely used in roads, ports, mines, firefighting, traffic safety and other fields, and playing a highly symbolic role. Main composition: tio2-bao-zno-zro2 Refractive index: í² 1.90-1.93í²2.23-2.4 (for refraction material use) Color: transparent or tiny yellow Shape: spherical particles, fluidity Size range: 10 ¿c 1000 ª8m (according to customer's requirements specifications) Roundness: í² 90% Rate of lost through: ín 3% Density: 4.2 - 4.5g/cm3 Packaging: 25 ía 0.2kg/barrel (according to customerí»s demand) Save: ventilated & dry place, sealed
Glass Beads are manufactured from lead-free, soda lime-type glass, containing no free silica that is made into preformed ball shapes. Glass beads produce a much smoother and brighter finish than angular abrasives. Glass beads can be recycled approximately 30 times. Chemically inert and environmentally friendly, glass beads are an acceptable method of metal cleaning or surface finishing when properly controlled. Glass Bead Blasting Glass bead blasting produces a clean, bright, satin finish, without dimensional change of the parts. Available in a wide range of sizes, glass beads are primarily used in blasting cabinets for honing, polishing, peening, blending, finishing, removing light burrs and cleaning most light foreign matter. For delicate thin-walled parts and thin welds, peening with glass bead abrasive material provides the right balance of stress relief without over-stressing and causing damage. Consider the size of perforations or holes through which the glass beads must pass when screen separating parts from media after use. 25kg or 1mt big bag
Glass Bead with Refractive Index 1.93Nd 1.93nd glass bead is used for Exposed-Lens type retro-reflective articles, such as open-type reflective sheets, reflective fabric. reflective tape, reflective yarn and Encapsulated-Lens type retro-reflective articles, such as high intensity grade reflective sheet I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color White Form Fine spheres powder Size 10-100um(can be provided by specific request) Roundness 95% Opacity 1% Aluminum Coated Glass Bead with Refractive Index 1.93ND Aluminum coated glass bead is used for road signs , traffic safety goods and reflective printing ink, screen printing etc. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 25-38um;30-45um; 40-55um; 50-75um
Glass Bead with Refractive Index 1.93Nd 1.93nd glass bead is used for Exposed-Lens type retro-reflective articles, such as open-type reflective sheets, reflective fabric. reflective tape, reflective yarn and Encapsulated-Lens type retro-reflective articles, such as high intensity grade reflective sheet I. Technical Data Composition TiO2-BaO-SiO2� � GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color White Form Fine spheres powder Size 10-100um(can be provided by specific request) Roundness 95% Opacity 1% Aluminum Coated Glass Bead with Refractive Index 1.93ND Aluminum coated glass bead is used for road signs , traffic safety goods and reflective printing ink, screen printing etc. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 25-38um;30-45um; 40-55um; 50-75um
Glass Bead with Refractive Index 1.93Nd 1.93nd glass bead is used for Exposed-Lens type retro-reflective articles, such as open-type reflective sheets, reflective fabric. reflective tape, reflective yarn and Encapsulated-Lens type retro-reflective articles, such as high-intensity grade reflective sheet. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color White Form Fine spheres powder Size 10-100um(can be provided by specific request) Roundness 95% Opacity 1% Aluminum Coated Glass Bead with Refractive Index 1.93ND Aluminum coated glass bead is used for road signs , traffic safety goods and reflective printing ink, screen printing etc. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 25-38um;30-45um; 40-55um; 50-75um
Glass Bead with Refractive Index 1.93Nd 1.93nd glass bead is used for Exposed-Lens type retro-reflective articles, such as open-type reflective sheets, reflective fabric. reflective tape, reflective yarn and Encapsulated-Lens type retro-reflective articles, such as high intensity grade reflective sheet. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color White Form Fine spheres powder Size 10-100um(can be provided by specific request) Roundness 95% Opacity 1% Aluminum Coated Glass Bead with Refractive Index 1.93ND Aluminum coated glass bead is used for road signs , traffic safety goods and reflective printing ink, screen printing etc. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 25-38um;30-45um; 40-55um; 50-75um
1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity; 2, round elastic particles, impact resistance, can be recycled many times, less loss; 3, the spray wear is small, extend the service life of the nozzle; 4, the surface of the ball, will not damage the processing surface and precision size; 5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value; 6. Suitable for dry and wet sand blasting; 7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting; 8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.
Advantage of SICHENG Glass beads: 1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity; 2, round elastic particles, impact resistance, can be recycled many times, less loss; 3, the spray wear is small, extend the service life of the nozzle; 4, the surface of the ball, will not damage the processing surface and precision size; 5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value; 6. Suitable for dry and wet sand blasting; 7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting; 8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.
1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity; 2, round elastic particles, impact resistance, can be recycled many times, less loss; 3, the spray wear is small, extend the service life of the nozzle; 4, the surface of the ball, will not damage the processing surface and precision size; 5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value; 6. Suitable for dry and wet sand blasting; 7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting; 8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.
Glass bead for sand blasting 1,Road making, airport road marking; 2,Fillers for various insulation and sound insulation products; 3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc 4,provide brightness for medical mechanical instruments and automobile parts 5,Be used for reflective safety clothing to improve safety.
We Introduce Ourself As One Of the Leading manufacturers & exporters of all type Buffalo cow horn buttons Horn plate drinking horn blowing horn mugs Bone Beads Horn Beads resin beads horn bone buttons Brass Product from india BS GROUP INDIA is A Well Established Manufacturing company in north India Undertaken By Mr, Shuaib alam Since 1995 our company is Being Manufacturing and exporting Fashion & Garments accessories Horn,bone,Resin,Wood,Glass,Metal,brass,Ceramic,Frost,burry, Loose Beads European,USA And South Asian Countries as per There Request for our all Buyers we assure you the best quality products with best price. having good experience we can develop any products form our client.
Hollow glass microspheres, made of Soda Lime Borosilicate Glass, are hollow spheres which grain size is 10-250microns, wall-thickness 1-2 microns, filled with inert air or gas. They are produced at the high temperature of 700-800 degrees Celsius through complicated chemical and physical transformation. Hollow glass microspheres are white and the specific gravity of them is about 0.25-0.60g/cc. They have much merit, such as lightweight, great buoyancy, hard, rigid, waterproof, innoxious, insulative, low heat conductivity, higher mechanical strength and excellent chemical stability,etc. Their surface was treated by the special way and the products are dispersed very easily in organic materials such as resin. � Hollow glass microspheres are widely used in composite materials such as FRP, man made marble and man made agate. They can decrease the weight of the composite materials and the composite materials have excellent performance of sound insulation and heat preservation, and they can improve the mechanical performance of the composite materials such as strengthened rigidity, enhanced anti-impact property, excellent anti-breaking property and re-processing function. Hollow glass microspheres are applied in a wide range of fields such as aviation, space flight, new bullet train, luxurious yacht, adiabatic dope, bowing balls, in which they play a distinctive role. Hollow glass microspheres are the excellent sensitized of emulsion explosive. They can improve the detonation property of emulsion explosive and prolong the shelf period of emulsion explosive. When used in the resin putty, hollow glass microspheres can increase the volume of resin putty, improve its polishing function. Packing: net 10kgs in Plastic film lined plastic weaving bags or strong cartons. Hollow glass microspheres series