Bitumen Petroleum Asphalt 70 90 Suppliers and Manufacturers

Maximum : 100,000 MT/Month

Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.

Bitumen Product Description : Bitumen is widely used in the construction of asphalt roads and bituminous membrane products. Bitumen is commonly used to build highways, motorways and rail networks. Bitumen has excellent water-proofing properties and is widely used for making roofing products along with a range of other household and industrial applications, from emulsion paints to sound-proofing. Penetration Bitumen and Bitumen Emulsions are used for the construction of railway tracks and by using special types of bitumen such as Polymer Modified Bitumen, the vibration and noise levels are reduced due to a dampening effect. Bitumen has been proven to be effective on both high-speed railway tracks and heavy load railway tracks. Bitumen is also used for surfacing airfield runways and air strips (PMB is preffered due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defences. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture. Price of product ( USD price or FOB price) : 3.000 MT monthly market price. 10.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : MOQ 3000 MT Bulk in tanker vessels. Drums 150/180/200 Kg. Jumbo bags 1000 Kg. Poly bags 32 Kg. Tanks 20 MT.

Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures. Key Features: Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction. Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation. Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces. Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads. Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure. Applications: Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways. Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads. Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots. Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture. Specifications: Penetration at 25 C: 60-70 dmm Softening Point: 49-56 C Flash Point: Minimum 232 C Ductility at 25 C: Minimum 100 cm Solubility in Trichloroethylene: Minimum 99.0% Specific Gravity: 1.01-1.06 Packaging: Available in drums, bulk containers, or as per customer requirements. Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications. Why Choose Bitumen Grade 60/70? Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability. Versatile Applications: Suitable for a wide range of paving and waterproofing projects. High Quality: Manufactured under stringent quality control measures to meet global standards.

Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures. Key Features: Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction. Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation. Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces. Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads. Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure. Applications: Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways. Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads. Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots. Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture. Specifications: Penetration at 25C: 60-70 dmm Softening Point: 49-56C Flash Point: Minimum 232C Ductility at 25C: Minimum 100 cm Solubility in Trichloroethylene: Minimum 99.0% Specific Gravity: 1.01-1.06 Packaging: Available in drums, bulk containers, or as per customer requirements. Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications. Why Choose Bitumen Grade 60/70? Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability. Versatile Applications: Suitable for a wide range of paving and waterproofing projects. High Quality: Manufactured under stringent quality control measures to meet global standards.

Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Penetration Bitumen 60/70 serves as a vital component in road construction projects. It is specifically engineered for optimal performance in such applications. It is imperative to adhere to the recommended usage guidelines and consult with the supplier before considering alternative applications. The properties and specifications of Bitumen 60/70 are rigorously tested to ensure compliance with industry standards and project requirements.

We are supplier and exporter of Bitumen. Bitumen is used in road construction due to various properties and advantages. The bitumen as a raw material in flexible road construction and bitumen as a mix (composing other materials i.e. aggregates etc.) serves certain advantages, that prompt to use bitumen widely in road construction.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Technical Data Sheet Bitumen 60/70 Paving Grade Bitumen Description Bitumen 60/70 has the highest-boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil. Bitumen 60 70 is composed of asphaltene and maltene. The heavy insoluble asphaltene molecules give bitumen 60/70 its body and softening point while the maltenes are oily and make asphalt flexible. Asphalting molecules are soluble in aromatic solvents like toluene but insoluble in heptane. The maltenes are heptane-soluble molecules and less aromatic. Applications Bitumen 60/70 is a high-quality penetration grade bitumen used in road construction and other similar applications. Bitumen penetration grade 60/70 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Bitumen 60/70 is most used bitumen grade and basic material for all other bituminous products. Typical Specification ITEM SPECIFICATION TEST METHOD SPECIFIC GRAVITY @ 25/25 oC 1.01/1.06 D-70 PENETRATION @ 25 oC 60/70 D-5 SOFTENING POINT oC 49/56 D-36 DUCTILITY @ 25 oC SMC 100 MIN D-13 LOSS ON HEATING %WT 0.2 MAX D-6 DROP IN PENETRATION AFTER HEATING % 20 MAX D-6 & D-5 FLASH POINT oC 250 MIN D-92 SOLUBILITY IN CS2 %WT 99.5 MIN D-4 ORGANIC MATER INSOLUBLE IN CS 0.2 MAX D-4 SPOT TEST NEGATIVE *A.A.S.H.O.T 102 Packing: Bulk shipment, 150kgs, 180kgs, 200kgs new steel drum. 25kgs, 50kgs, 300kgs, 500kgs, 1000kgs Polybag.

Bitumen produced by refineries in the Russian Federation, Kazakhstan, and elsewhere, is available for sale FOB or CIF at the best prices. Prices are negotiable for serious big-volume buyers. Buyer's mandate welcome. 30/40 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 40/50 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 50/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 60/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 80/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 85/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 100/120 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT

Origin: Kazakhstan MOQ: 50,000 MT x 12 mths Max Qty: 500,000 MT/mth

Bitumen, often referred to as asphalt, is a viscous, black, and sticky substance. It is a semi-solid form of petroleum and is primarily used as a binder in road construction. When mixed with aggregates, it forms asphalt concrete, the material commonly used for paving roads. Primary Characteristics: Appearance: Thick, black to dark brown substance. Temperature Sensitivity: Becomes liquid when heated and returns to a semi-solid state upon cooling. Water Resistance: Acts as a waterproofing agent, making it ideal for various sealing applications. Adhesion: Excellent adhesive properties, allowing it to bind aggregates together effectively. Grades & Types: Bitumen comes in various grades, primarily determined by its viscosity and penetration value. Common types include: Paving Grade Bitumen: Used in road construction. Oxidized Bitumen: Produced by air blowing and has stiffer properties. Cutback Bitumen: Bitumen diluted with solvents to reduce viscosity for specific applications. Modified Bitumen: Bitumen altered with polymers to enhance its properties. Applications: Road Construction: Mainly used as a binder mixed with aggregates to pave roads. Roofing: Used as a waterproofing agent in roofing felts. Dams & Reservoirs: Acts as a waterproofing membrane. Soundproofing: Used in soundproofing materials due to its insulating properties. Advantages: Durability: Offers a long-lasting paving solution, able to withstand various weather conditions. Cost-effective: Provides a reliable and economical material for large-scale infrastructure projects. Recyclable: Old bituminous roads can be reprocessed to produce new roads.

Product Details: Storage : Dry Place Density : 1000 Kilogram per cubic meter (kg/m3) Grade : Industrial Grade Application : Industrial Supply Ability : 2500000 Kilograms Per Month Price And Quantity Minimum Order Quantity : 50 Kilograms Product Specifications Storage : Dry Place Application Industrial Density : 1000 Kilogram per cubic meter (kg/m3) Grade : Industrial Grade Trade Information Payment Terms : Cash in Advance (CID) Supply Ability : 2500000 Kilograms Per Month Delivery Time : 1 Week Main Domestic Market : All India Product Description Industrial Bitumen we offer has multiple uses in industries with wide range of applications. It has all major traits such as plasticity, adhesion, resistance to acids, waterproofing and more. This is an inexpensive as well as safe material to be used in various industries. It is used in construction industry, making roads, roofing and more. The major usage of Industrial Bitumen is in road construction as it is cost effective as well as durable when used with concrete.

- Grade 40-50: Suitable for road construction and repair. - Grade 60-70: Ideal for general paving applications. - Grade 85-100: Used in various industrial applications.

Penetrating Bitumen Ideal for pavements, offering excellent penetration grades that contribute to the strength and longevity of road surfaces.