Bitumen Drums Suppliers and Manufacturers

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Bitumen Product Description : Bitumen is widely used in the construction of asphalt roads and bituminous membrane products. Bitumen is commonly used to build highways, motorways and rail networks. Bitumen has excellent water-proofing properties and is widely used for making roofing products along with a range of other household and industrial applications, from emulsion paints to sound-proofing. Penetration Bitumen and Bitumen Emulsions are used for the construction of railway tracks and by using special types of bitumen such as Polymer Modified Bitumen, the vibration and noise levels are reduced due to a dampening effect. Bitumen has been proven to be effective on both high-speed railway tracks and heavy load railway tracks. Bitumen is also used for surfacing airfield runways and air strips (PMB is preffered due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defences. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture. Price of product ( USD price or FOB price) : 3.000 MT monthly market price. 10.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : MOQ 3000 MT Bulk in tanker vessels. Drums 150/180/200 Kg. Jumbo bags 1000 Kg. Poly bags 32 Kg. Tanks 20 MT.

We are supplier and exporter of Bitumen. Bitumen is used in road construction due to various properties and advantages. The bitumen as a raw material in flexible road construction and bitumen as a mix (composing other materials i.e. aggregates etc.) serves certain advantages, that prompt to use bitumen widely in road construction.

Bitumen, often referred to as asphalt, is a viscous, black, and sticky substance. It is a semi-solid form of petroleum and is primarily used as a binder in road construction. When mixed with aggregates, it forms asphalt concrete, the material commonly used for paving roads. Primary Characteristics: Appearance: Thick, black to dark brown substance. Temperature Sensitivity: Becomes liquid when heated and returns to a semi-solid state upon cooling. Water Resistance: Acts as a waterproofing agent, making it ideal for various sealing applications. Adhesion: Excellent adhesive properties, allowing it to bind aggregates together effectively. Grades & Types: Bitumen comes in various grades, primarily determined by its viscosity and penetration value. Common types include: Paving Grade Bitumen: Used in road construction. Oxidized Bitumen: Produced by air blowing and has stiffer properties. Cutback Bitumen: Bitumen diluted with solvents to reduce viscosity for specific applications. Modified Bitumen: Bitumen altered with polymers to enhance its properties. Applications: Road Construction: Mainly used as a binder mixed with aggregates to pave roads. Roofing: Used as a waterproofing agent in roofing felts. Dams & Reservoirs: Acts as a waterproofing membrane. Soundproofing: Used in soundproofing materials due to its insulating properties. Advantages: Durability: Offers a long-lasting paving solution, able to withstand various weather conditions. Cost-effective: Provides a reliable and economical material for large-scale infrastructure projects. Recyclable: Old bituminous roads can be reprocessed to produce new roads.

- Grade 40-50: Suitable for road construction and repair. - Grade 60-70: Ideal for general paving applications. - Grade 85-100: Used in various industrial applications.

Bitumen

Functional Bitumen Used primarily in road construction and waterproofing, it offers high durability and resistance to water.

Bitumen Grade 60/70 And 80/100 As Per Seller Procedure only. Dip and pay CIF FOB

Product Name: Bitumen Quality: Top Quality Delivery Time: 5-7 Days Packaging: Custom Customization Orders: Accepted We Are The Wholesale Supplier and Exporter Of *Bitumen*. Bulk Stock Available for Worldwide Delivery Contact Us For More Information.

Bitumen is known for its waterproofing and adhesive properties and is commonly used in the construction industry, notably for roads and highways. Production occurs through distillation, which removes lighter crude oil components like gasoline and diesel, leaving the heavier bitumen behind. Bitumen deposits can also occur naturally at the bottom of ancient lakes, where prehistoric organisms have decayed and been subjected to heat and pressure. Wholesale Bitumen

Bitumen is a black, semi-solid or liquid substance with high viscosity produced by the non-destructive distillation of crude oil during petroleum refining. The core industry using bitumen is road construction (asphalt) and another significant field is the building industry (roofing membranes, water-proofing felts)

BITUMEN Minimum Quantity : 50,000 MT Maximum Quantity 100,000 MT FOB Price : $320.00 USD / MT CIF Price : $330.00 USD / MT Commission : $5 USD Seller side, $5 USD Buyer side Delivery Terms: CIF / FOB Shipment. Payment Term: MT103 TT Wire Transfer. Quality: Q&Q test report will be conducted at the loading port by SGS or equivalent at the expense of seller. Product Origin: KAZAKHSTAN. Contract Term: 12 months minimum after a successful trial (with rolls and extensions). Port of Loading: Jurong Port, Singapore, Aktau, Pavlodar, Kuryk, Fujairah, Vladivostok, Rotterdam, and Houston Port.

HDPE chemical drum/jerry can from 10L-240L

Wooden Drum Barrel The typical specifications of a wooden drum barrel include a main material of oak wood, measured in gallons or liters (e.g., 5, 15, 30, 55 gallons), a metal hoop or band frame (usually steel), top and bottom closed with wooden heads, and a possible bung for sealing. The weight, surface finish, and other details may vary depending on the specific use case. MOQ: 100 pcs Made in Vietnam

Tight Head or Open Head Steel Drums Available and can be customised to meet your requirements. * Tight Head drums have a triple seam construction (7 layers of steel) with a vertical seam electrically welded. * Superior vacuum resistance. * Open Head drums have completely removable lids and a triple seam safety factor with several locking band alternatives. * Many large steel drums can be reconditioned and reused several times before being recycled. * Fully customisable size 55+ gallons (208+ nominal litres), lined, various closures and fittings available. * Various colour and product decoration options are also available.