Biosystem Proflex 3 X 32 Well Pcr System Suppliers and Manufacturers

Two tier Galvanized double deck bike rack/bicycle rack For all types of bicycles 2 tier bike rack can accommodate all types of bicycles, such as mountain bikes and town bikes, and any bicycles can also be chained for extra security. Once placed, the bicycle is well supported by wheel channels and the back wheel is stabilised by a gutter to lock the bicycle firmly. The lower rack has a sloping wheel channel, so the user does not have to bend between the levels which makes the cycle parking system simple and easy to use for all ages. This 2 tier bicycle rack is excellent for space saving as the cycle stands are compact with a centre to centre distance of around 370 mm. There is also the option to have the powder coated in any of the 192 RAL colours. Double deck bicycle rack features: 1.This double deck bicycle rack can park 2 bikes per set(one up, one down). 2.assembled in underground garage. 3.used for public place such as hosipital, school etc. 4.beautify the environment. 5.can Save space and prevention of theft.

Important Note: We can also do OEM/ Private Labeling Port of Loading: Semarang, Indonesia Baby Diapers FLUFFY Tape (Velcro) Type. Available Variants: 1. FTS10 (S Size. 1 Box = 10 Bag x 30 Pcs) 2. FTS 20 (S Size. 1 Box = 20 Bag x 15 Pcs) 3. FTS 40 (S Size. 1 Box = 40 Bag x 6 Pcs) 4. FTM 9 (M Size. 1 Box = 9 Bag x 30 Pcs) 5. FTM 18 (M Size. 1 Box = 18 Bag x 15 Pcs) 6. FTM 36 (M Size. 1 Box = 36 Bag x 6 Pcs) 7. FTL 8 (L Size. 1 Box = 8 Bag x 30 Pcs) 8. FTL 32 (L Size. 1 Box = 32 Bag x 6 Pcs) 8. FTX 7 (XL Size. 1 Box = 7 Bag x 30 Pcs) 9. FTX 14 (XL Size. 1 Box = 14 Bag x 16 Pcs) Baby Diapers FLUFFY Pants Type. Available Variants: 1. FPS 20 (S Size. 1 Box = 20 Bag x 12 Pcs) 2. FPM 8 (M Size. 1 Box = 8 Bag x 24 Pcs) 3. FPM 18 (M Size. 1 Box = 18 Bag x 12 Pcs) 4. FPM 34 (M Size. 1 Box = 34 Bag x 6 Pcs) 5. FPL 7 (M Size. 1 Box = 7 Bag x 24 Pcs) 6. FPL 18 (L Size. 1 Box = 18 Bag x 12 Pcs) 7. FPL 30 (L Size. 1 Box = 30 Bag x 6 Pcs) 8. FPX 16 (L Size. 1 Box = 16 Bag x 12 Pcs) 9. FPX 26 (L Size. 1 Box = 26 Bag x 8 Pcs)

Product Name: Ferrous Sulphate Heptahydrate Molecular Formula: FeSO4. 7H2O CAS No.: 7782-63-0 Mol Weight: 278.05 Usage and Dosage: 1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement. 2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation. 3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color. 4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies. Storage: Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Precaution: Flammability Non flammable. No fire or explosion hazard exists. Packing: Net weight 25kgs, 50kgs per each plastic woven bag Technical Specification Appearance: Light green crystalline powder Fe 19.7%min Pb 20 ppm max As2 ppm max Cd 5 ppm max Size Crystalline Powder

BAMBOO POLE Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle.

BAMBOO POLE Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle.

Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle.

Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle. Price FOB HCMC Port: Full Container Load Payment & delivery: L/C at sight or T/T 30% in advance, negotiable.

***SOLID BAMBOO POLE*** Specification: + Color: Natural. + Origin: Vietnam. + Thickness (mm): 3-5. + Diameter (mm): 14/16/18/20/24/27/32/38/45/50. + Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. + Packing: 50pcs/bundle.

- High water and nutrition holding capacity - Enhance strong and healthy root system. - Perfect growing medium for plants - Used in green house plantation Raw material: Coconut fiber. Block Size: 30 x 30 x 15 cm. PH: 5.8 to 6.8. Moisture: 15-20% Max. Impurities/sand: 3% Max. Electric Conductivity (E.C): High EC (Animal Bedding): 3.5 - 5 mS/cm. Low EC (For Plant Growth) < 0.5 mS/cm. Packaging: 24ton/con40ft

Descriptions: Cuttlebones are an excellent calcium source for birds. The rough edible surface helps to trim the beaks of birds as well as provide something for your bird to chew on. The cuttlebones can also be cut into smaller pieces or ground into a powder and used as a nutritional supplement for all types of birds. Features: Provides natural calcium and minerals Derived from natural cuttlefish Natural surface keeps beaks trim and sharp Suitable for cockatiels Specification: Material: Cuttlefish bone Size: 5~20cm Quantity: 3~5 Pcs/bag Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-3cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Contents: 1 Bag x Cuttlefish Bone

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

Natural Phyton-Herbal Emulsion Oil 1. As the main component, Golden Jojoba oil is a deeply penetrating oil with excellent softening and moisturizing effect. 2. Unprocessed Jojoba seed oil naturally suits well on skins to minimize irritation and maximize moisturizing effect which its own nutrients can be absorbed well into your skin. 3. Eucalyptus oil has been proven to strengthen the respiratory system and clear our heads.

* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine,1row ,2row customized 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world Keywords : Tortilla Taco Chapati Roti Roasted duck bread thin bread making machine Tortilla Taco Chapati Roti Roasted thin bread making machine

Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world Keywords : Tortilla Taco Chapati Roti Roasted duck bread thin bread making machine Tortilla Taco Chapati Roti Roasted thin bread making machine

Mexico Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world