Outside size: 8100 40003200mm/26.57*23.12*10.50ft(LWH) Inside size: 69003900 2650mm/22.64*12.80*8.69ft(LWH) Entrance door: 3 folds,3000x2600mm/9.84*8.53ft(WÃ?H), bending steel without covered frame Emergency door: 650*1800mm/2.13*5.91ft(W*H),equipped with handle lock Automotive Spray Booth JNYH-01 Product Introduction Vehicles spray booth provides a closed environment for vehicles painting with pressure controlling. As we know that dust free, appropriate temperature and wind speed are necessary for pain
Gum Arabic, E414, CAS no.9000-01-5, a natural gum made of hardened sap taken from two species of the acacia tree. Gum Arabic appears as an off-white to yellowish granular or powder. It is used as food thickeners in food and beverages such as in icing, fillings, chewing gum and other confectionery. Nutritional properties:Enrichment in soluble dietary fibers; Improvement of digestive comfort; Source of prebiotic fiber. As an experienced Gum Arabic manufacturer and supplier, we has been supplying and exporting Gum Arabic for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Gum Arabic Specification ITEMS STANDARD Appearance Off-white to Yellowish Granular or Powder Odor Own inherent smell, no odor Viscosity ( Brookfield RVT, 25%, 25, Spindle #2, 20rpm, mPa.s) 60- 100 pH 3.5- 6.5 Moisture(105â??, 5h) 15% Max Solubility Soluble in water, insoluble in ethanol Nitrogen 0.24%- 0.41% Ash 4% Max Insolubles in Acid 0.5% Max Starch Negative Dannin Negative Arsenic (As) 3ppm Max Lead (Pb) 10ppm Max Heavy Metals 40ppm Max E.Coli/ 5g Negative Salmonella/ 10g Negative Total Plate Count 1000 cfu/ g Max Specifications of Acacia Gum Spray-dried Powder : ITEMS STANDARD Appearance White to off-white Powder Odor Own inherent smell, no odor Viscosity ( Brookfield RVT, 25%, 25, Spindle #2, 20rpm, mPa.s) 60- 100 pH 3.5- 6.5 Moisture(105, 4h) 10% Total ash 4% Acid insoluble ash 0.5% Acid insoluble matter 1% Nitrogen 0.24%- 0.41% Starch or dextrin Negative Tannin Negative Arsenic (As) 2 mg/kg Lead (Pb) 3 mg/kg Heavy Metals 20 mg/kg E.coli/ 5g Negative Salmonella spp./ 10g Negative Total Plate Count 5000 cfu/ g
We supply a wide range of Aluminum Ingots that meet international standards and specifications. Aluminum ingots are a crucial raw material used in numerous industries, including automotive, construction, aerospace, and electrical. They are highly sought after for their lightweight, corrosion-resistant, and excellent conductivity properties. Aluminum ingots serve as the building blocks for manufacturing various Aluminum-based products, such as sheets, rods, extrusions, and castings. Specifications/Special Features : Aluminum A7/A8 GOST 11069-74 Quality Value demanded by norm GOST 11069-74 A7 A8 Al Min. 99,7% Min. 99,8% Fe Max. 0,16% Max. 0,11% Si Max. 0,15% Max. 0,08% Cu Max. O,01% Max. 0,01% Zn max. 0,05% Max. 0,05% Ti max. 0,02% Max. 0,02%. Contact AWF Global Trading Company Limited today to discuss your requirements. Our team will be delighted to assist you and provide you with the best solutions tailored to your needs. Let us be your partner in the world of commodity trading.
A spray booth is a specially designed enclosure used to house spray equipment and isolate expelled vapor that is generated during a spray application process. Spray processes are used to apply corrosion preventative coatings to a metallic surface. Spray booths are typically intrinsically safe and built to be fire and explosion proof. Common spray booths are: Car, truck, train paint booth Telescopic spray booth Industrial paint booth Furniture spray booth Water curtain spray room Dry spray booth
Elen-7 : Our booths with painting and drying feature is designed to suit your needs with special features and adequate insulation to take control of your operating costs .
A spray paint for marking masonry, pavements, asphalt, cement and wood. It is resistant to weathering and wear. It is available in fluorescent colors. The product comes with a special 360 valve, so it can be used in any position.
Ideal for creating general parking signs and signaling danger zones. To make visible the terms of reference such as siting, excavation, demarcation of maintenance works. It is resistant to weathering and chemicals. It can be used on numerous surfaces such as cement, asphalt, glass, wood, synthetic materials. Lines of high precision can be made with this product. The width of the line can vary from 4 to 6 inches depending on the setting. The length varies depending on the traveling speed and the porosity of the surface: 40-50 m.
PAINT REFILL DME Bottle filled with 300ml mix of solvents, propellants and additives. It is compatible with most paints: acrylic, nitro-acrylic, nitro-synthetic, nitrocellulose. The reseller adds the paint according to the required color. In case of special filling the color can slightly change. We recommend using the product soon after filling the paint
A special paint that temporarily changes the color of a surface. It can be used on non-porous surfaces. It creates a decorative, protective removable film and has a soft touch effect. The original surface remains intact after the painted surface has been removed. It can be used on cars, sports gear, furnishings and more. To apply, vigorously shake the bottle for at least 1 minute, until the marbles inside the can move freely. Carefully clean the surface before application. Keep a distance of 20-30cm/8-1 2in. Apply 4 to 5 crossed layers (horizontal and vertical), each one every 10-15 minutes. It will be completely dry approximately 2 hours after application
It is a multipurpose paint designed for indoor and outdoor use. It is dry to the touch approximately 15 minutes after use and its completely dry approximately 22 hours after application. It can be used on various surfaces including wood, metal, glass, ceramic, plastering, masonry, doors, furniture, radiators, ornaments, and other objects.
It is a multipurpose paint designed for indoor and outdoor use. It is dry to the touch approximately 15 minutes after use and its completely dry approximately 22 hours after application. It can be used on various surfaces including wood, metal, glass, ceramic, plastering, masonry, doors, furniture, radiators, ornaments, and other objects
Water based paint with a ultra matt finish effect, suitable for both indoor and outdoor use. It's ideal for decorating any common surface such as metal, plastic, glass, ceramic etc. especially suitable for turning your old wood furniture into a vintage/modern piece of art. Fast drying finish, low VOC. After your application, when the paint is dry, It is advisable to add wax or transparent varnish which provides that protective layer on your newly modified piece
It's a professional enamel spray that is resistant to scratches, alcohol and gasoline. Ideal for painting tractors and agriculture machines. Before applying this paint it is mandatory to use the suitable primer (V400PRIMER3 or V400PRIMER5) Sku : V400CAR
It is the enamel that makes surfaces bright and visible from a distance, even in the absence of light. The fluorescent effect is brought out by applying AMBRO-SOL FLUORESCENT on a white background. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Sku : V400FLUOR
It is a high quality enamel with a modified silicone resin base, which allows you to renew all surfaces normally exposed to high temperatures. Heat resistant up to 300 C-700 C (check the Technical data sheet). Application: parts of heaters, stoves, ovens, chimney flues, barbecues, fire screens, motorcycle mufflers, etc. don't expose in direct contact with flames. Important: to obtain an optimal and long lasting result it is necessary for the painted parts to be exposed even if only once, to a temperature of at least 180 ' C; any less will make the hardening and adhesion of the enamel only partial. Clean carefully the surface before application and shake vigorously the can. After use, it's advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the nozzle. Sku:V400TEMP
It's a professional enamel spray ideal for for the paiting of rims wheels of motorcycles and cars. Thanks to its textured / embossed fi nish, this special paint is specifi c for repainting or renewing bumpers, side panels and spoilers. Sku:V400FAS
It's the enamel with antiquing effect for internal and external, based on lamellar micaceous iron-oxide, particularly suitable for the protection from the elements and the decoration of internal and external furnishing. The use of special corrosion inhibitors and the possibility of applying high thicknes-ses, allow to obtain excellent protection over time. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Application: metal and wood surface, plaster, doors, railings, gates, metal grates, metal cabinets, flashings, furniture, garden furniture. Sku:V400MIC
RAD: it s a special paint for the decoration and protection of all internal and external surfaces of heaters and radiators, resistant to 120 ' C. Suitable for home radiators, heat registers, electric convectors. PAST.2 it's an acrylic enamel for the decoration and protection of all surfaces of all appliances, as washing machines, dishwashers, refrigerators, etc. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Sku:V400RAD/PAST.2
A metallic enamel that has a particular brightness that looks similar to a mirror. It is adhesive and can be used on any material that is not non-stick (Polyethylene, etc..). Ambro-Sol Leafing is designed for indoor/outdoor use to brighten different surfaces and objects such as frames, furniture, iron, vases, mask, cups, medals, Christmas ornaments, etc. It is dry to the touch approximately 30 minutes after use and its completely dry approximately 1 hour after application. It does not provide protection from abrasions. Once applied handle with care. Sku:V400MET
This primer is designed to be used as the strong base coat to ensure the perfect adhesion of all enamel spray on diffi cult surfaces such as metal alloys and metals. It protects metal surfaces from rust. Also suitable as a fi ller in bodywork car sector for small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. For overcoating are required at least 24/48 hours. After use, it's advisable to spray for 2/3 seconds with the can upside down to avoid the block of the nozzle. Sku:V400PRIMER
