AUTOMOTIVE FUEL DIESEL OIL En590 SPECIFICATION GASOIL 10 GOST � 52368-2005 (�?N 590:2004), CLASS 1, TYPE III Unit Description Value Density at 15 degr. kg/m3 max. 845 Cetane index min. 49 Kinematic viscosity at 20 Co mm2 (cSt) Min. 2.0 / Max. 4.5 Acidity, mg KOH for 100 cm2 of fuel, max. 10 Ash content, %, max. 0.01 Sulphur content, mg/kg, max. 10 Hydrogen sulphide content Absent Copper plate test Passed Water soluble acids & alkalis Passed Content of mechanical impurities Passed Water content mg/kg 200 Flash point determined in a closed cup, Cáµ? Min. 55 Solidification temperature, Cáµ?, Max. Cloud temperature, Cáµ?, Max. 16 Filterability temperature Cáµ? -27 Fat acid methyl ether content (FAME), % 5 Bacterial contamination (IP 385), CFU /litre, Max. 1,000 Quantity: 100,000 MT for Month's CIF, Singapure
EN 590 is a standard published by the European Committee for Standardization that describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union and several other European countries.
Origin: Russia Quantity: 10 000 MT/per month / 100,000 MT per month
Available products: D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2 Automotive, -EN590 10 PPM, -Diesel D6, -Diesel 10PPM & 50 PPM. -Mazut M100 -Bitumen -Crude Oil -Copper
EN590 Diesel is an ultra-low sulfur diesel fuel designed for modern diesel engines. It offers: Minimal sulfur content for reduced emissions. High cetane number for efficient combustion. Enhanced lubricity for engine protection. Cold weather performance. Compatibility with emission control systems. Excellent storage stability. This clean-burning fuel promotes environmental responsibility and optimal engine performance.
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
En 590 Gas Oil Is A Gas Oil With A Sulfur Concentration Of 10 Ppm. It Has A Higher Cetane Number Than A2 Class Gas Oil (another 10ppm Sulphur Content Class Of Red Diesel), Making It More Suited To Internal Combustion Engines In Off-road Cars. The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure. Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding. Seller Working Procedures, Terms, And Condition. Fob Price: Us$610.00 -- $620 Per Metric Tons (negotiable) Origin: Kazakhstan Key Specifications/Special Features: TEST UNITS METHOD RESULT Density at 15 C Kg/m2 EN ISO 12185 845.0 API gravity Kg/L ASTM D 1250 34 Ash content %m/m EN ISO 6245 0.01 Flash point C EN ISO 2719 Above 55 Sulphur content Mg/Kg EN ISO 20884 10
(EN590) 10 PPM/50PPM Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 100,000MT The price and discount: - FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT FROM NWE PLATTS - CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
Diesel
Hallo Good day we supplying Jet Fuel A 1 and EN 590 10 PPM and 50 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional ) we can provide TTV, TTT, TTO , CIF , FOB
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur. D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05. D2 Automotive Fuel Oil (ago). D6 Virgin Fuel Oil. Hsd Diesel High Speed 500ppm En90. Diesel En590 Euro4 Gost 52368. Pms Premium Motor Spirit Jp54 (ts1) Gost 10227-86. Jet Fuel A1 Gost 10227-86. Marine Fuel Oil Cst 180-280-380. Espo (siberia Pacific Oil) Crude Oil Api 34,7. Lco (light Cycle Oil). Mazut Mt100 Gost 10585-75 And 10585-99. Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93. Lpg 50/50 Propane/butane - 70/30 P/b. Lng 5542-87 By Iso Containers Etc. Gasoline All Types (87-89-92-95). Bitumen/asphalt All Grades. Fertilizers Urea, Dap, Etc Product Description : Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils.. Price of product ( USD price or FOB price) : 20.000 MT monthly market price. 100.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : All types/grades of Fuels, Gas, Oil are available for supply. Many commercial names for oils, fuels, gases, etc. are used in the market. To avoid misunderstanding basic details of specifications needed by buyer are mandatory. Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
En590, jeta1 and d6.
Product Name: DIESEL FUEL EN590 EURO 5 (ULSD 10PPM) Liftable Quantity: Minimum 20,000 MT Maximum 100,000 MT Trial Price - $530 MT FOB Houston Rotterdam
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
Greetings, my name is Sandra Moses-Adams, Owner of Moses Enterprise, a Sourcing Agency located in the USA. I am currently working with a Fuel Supplier located in the USA, if your Buyer is looking for EN590 or A1Jet Fuel see SOP & pricing below. After reviewing the SOP and you are agreeable with the price please email or post to WhatsApp your LOI and I will open a group with my Seller Mandate. My SM will arrange a Zoom call with the Seller to discuss your requirements. TRANSACTION PROCEDURES FOB TANK TO TANK 1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery. 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice alongside buyer tank storage agreement (TSA) for verification. 3. Seller provide buyer with the below listed PPOP. Product Passport (product analysis report) Irrevocable Commitment Letter to Supplier Tank Storage Receipt (TSR) Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm. 4. Seller provides buyer with SGS report, Injection Report, unconditional DTA. 5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage receipt (TSR) seller proceed for Tank-to-Tank injection and provide the buyer with the injection report of the product into buyer tanks. 6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. 8. TARGET PRICE: EN590 / $650MT
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.