Secondary used surplus steel, electrical steel, transformer lamination, crgo, silicon steel cold rolled and hot rolled, seamless steel tubes, steel pipes scrap, transformers scrap, copper scrap, aluminium scrap, aluminium cable, copper cable, bright bars, black bars, shafts, hollow shafts, stainless, brass, wire rope.International trade
Supplier of synthetic lubricants, compressor lubricants and industrial oils..
7000 qty 26W CDMT control gear (FOR SINGLE & TWIN 26W)
Used car engines, gear boxes, suspensions.
Engine gearbox vehicle parts.
Engines and gearboxes mercedes.
Commercail vehicle, commercail engines, engine power packs, engine spares, axles, gear boxes.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
The CPI -4600 Series compressor lubricants are formulated using premium polyalphaolefi n (PAO) synthetic base fluid, coupled with a high performance additive package. These compressor lubricants feature excellent thermal and oxidation stability enabling them to operate over a wide range of temperatures without coking, deposit formation or corrosion. The lubricants have low volatility and exhibit excellent miscibility with hydrocarbon gas and good compatibility with mineral oil lubricants. The CPI -4600 Series are recommended for refrigeration services due to excellent low temperature properties. They are wax-free as they are synthetic. A low pour point prevents lubricants from congealing in refrigeration lines. High film strength provides lubricity even when diluted with refrigerant. Applications and Compressor Type Propylene Refrigeration Oil-flooded rotary screw compressors Liquid ring vacuum pumps Other applications requiring an oxidative and thermally resistant lubricant Features and Benefits Hydrocarbon miscibility Work well with hydrocarbon gas in industrial refrigeration systems Oxidatively stable Longer system life Low volatility Reduced maintenance, reduced top-up High viscosity index Wide temperature range of operation Excellent lubricity Increased efficiency, reduced cost of operation
The CPI -1516 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to ensure shear stability, corrosion protection, and excellent lubricity. These compressor lubricants feature excellent protection against yellow metal staining by careful selection of a combination of corrosion inhibitors. This, coupled with unparalleled oxidative and thermal stability ensures that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI -1516 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and high viscosity index means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. Applications and Compressor Type Flooded rotary screw compressors Propane refridgeration Features and Benefits Corrosion protection (yellow metals) Enhanced system reliability and reduced down-time Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased effi ciency, reduced cost of operation High viscosity index Satisfactory use over wide range of operational temperatures
The CPI -1515 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to give negligible solubility or dilution in hydrocarbon gases These compressor lubricants feature excellent protection against hydrogen sulphide (H2S) within the gas stream. Corrosion protection, low pour point and excellent lubricity ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1515 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and negligible dilution with hydrocarbons means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service intervals. Applications and Compressor Type Flooded rotary screw compressors Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Insignifi cant dilution in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased efficiency, reduced cost of operation
The CPI-1508 Series compressor lubricants are formulated using a polyalkylene glycol (PAG) base fluid combined with a high performance additive package. These lubricants are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, oxidative and thermal stability enable the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1508 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1508 Series fluids are especially advantageous in compressors operating in harsh chemical environments, particularly sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Sour gas applications Heavy hydrocarbon gas stream applications Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
Engines and gearboxes.
Engines gearboxes, alternators and starter motors.
Features may include: Powering Your Boat from 115 H.O. to 300 HP E-TEC G2 Best In Class fuel economy E-TEC Direct Injection Fuel Technology V6 from 150 H.O. to 300 HP Power Steering Available in white or gray, plus color panels Engine Engine Type V6 66 E-TEC G2 D.I. Bore 3.39 in (86 mm) Stroke 3.10 in (78.7 mm) Displacement 167 Cu in (2.7 cc) Throttle 5000-6000 RPM Gear Ratio (Primary) 2.17:1 Steering Tie Bar/Remote Electric Starter Electric Alternator 133 Amps Total / 50 net Dedicated / 14 amps @ idle Fuel System Fuel System E-TEC Direct Injection with stratified low RPM combustion mode Dimensions Length Shaft: 25 in (635 mm) Weights Weight 512 lbs (233 kg) Features Features Controls: Slate Gray
Bearings, belts, chains, sprockets, couplings, motors, tools, oils seals, o rings, gearboxes, castors and wheels, lubricant, greases and oils, linear technology, key steels, gloves, ceramic bearings, stainless steel bearings, pulleys, bushes, chrome balls, housing units and inserts, fans, circlips.
We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.
Description by Manufacturer Chemical Composition: All Weight: 20/25kg per ingot Al (Min): 99.7%-99.9% Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of the ingot is clean and smooth.Applications:1. mainly used for melting ingot2. discontinuous melting with scrap3. easy control and operation4. fast melting5. Used for industry such as automobile,pinning and weaving,electron broadly and so onAl Content:99.7% minWeight: 20/25kg per ingot MOQ:1*20FCL( 25MT+-10% )Alloy Or Not:Non-alloy H.S.Code:7601101000