Features 1. This machine is heavy type, adopting with strengthened single-side driving system, for steady and exact running. 2. The machine is equipped with sheet-corrector, for protecting sheet from deviation in feeding, to ensure not to appear error in long folding process. 3. The machine is equipped with water spray device, to avoid unable to stick the box caused by dried sheet and bad line pressing. 4. The machine is equipped with sheet-corrector, for avoid sheet from deviation in feeding, to ensure not to appear error in folding process and align incorrectly. 5. The machine is adopted with touch screen, plc operation system, long-distance diagnose and maintenance system and remote controlling system, to meet easy operation. 6. Conveying pressure table is adopted with special material, adjusting pressure through air pressure, equipped with sponge belt, ensuring product quality. 7. The machine is used to laminate side-glue and 4-folding & bottom gluing, paperboard with board or b flute, e flute corrugated box.
Introduction of the machine: Mjzxj-1 model automatic folder gluer machine is composed of feeding part, glue and folding part, stacker part, speed controlled by plc, paper width is adjusted by touch pc, machine operation is easy and accurate, machine with automatic paper feeding function, automatic glue and fold function, automatic counting, automatic stacking and double conversion operation, the normal speed is 160pcs/min, max. Speed can be 220 pcs/min, this machine is your best choose which is energy-efficient and environmental protection.
It is corrugated board converting equipment for case forming, which is designed of manual fold and feed, and automatic glue application on glue lap and compression forming, suitable for single wall and double wall board. It is ideal substitute for stitcher. Features: 1. Lift feed table with footswitch control. 2. Manual fold and feed, automatic glue application on glue lap. 3. Idle wheel glue application, with self flow compensation, ensures no glue breaking during running. 4. Side baffles squaring, with wind compression forming, provides regular case forming and strong bonding. 5. Single case ejecting or stack ejecting are available. With counter, stacking up to preset 18alue makes binding and output statistics easy.
Remote control through whole machine to give user-friendly and easy set-up Modular design ready for upgrade in the future for job demanding All the transmission belts of the lower panels are wrapped around externally when replacing the belt, there is no need to unload the transmission shaft , it is simple and easy to replace. To meet various kinds of order demand in the future, the standard machine can be advanced by adding other optional units such as, regulator, pre-folder, 4& 6 corner attachment, panel movement by Motorization to achieve its highest efficiency Paper type : Cardboard 300-800gsm & E/B /C/B/A flute 5ply corrugated board Paper feeding: Accurate, automatic and continuous feeding Max gluing speed: 180 m/minute Adhesive: Soluble adhesive Machine Dimensionï¼?L*W*H/Mï¼?ï¼?21Ã?2.7Ã?2.2m Gross weight : 16T Power : 40KW
Automatic carton folder gluer machine Folder gluer machine Carton folder gluer machine Model UG1-1450PC UG1-1450AC paper Card board, corrugated board Card board, corrugated board Feeding way Automatically ,continuously Automatically ,continuously Speed 260m/min 260m/min Overall dimension 17000Ã?2350Ã?1650mm 15000Ã?2350Ã?1650mm Weight 12t 10t Power 20.5kw 18.5kw Model UG-1450PC/AC A MAX 1500mm A MIN 300mm B MAX 1500mm B MIN 80mm C MAX 730mm C MIN 140mm D MAX 350mm D MIN 20mm Automatic gluing and folding machine and it consist of vacuum adsorption feeding part, gluing and folding part and stacking and counter part. It adopts frequency to change speed and controlled by standard PLC touch screen, easy operation and reliable. High speed and energy-saving and save labor. It is suitable for the paper, corrugated paperboard with 3,5 layer. 1. The feeding unit of the machine has the paper board stack to hold the paperboard which helps to improve the production efficiency and it also adopts the air sucking structure to improve transport efficiency and accuracy. 2. Connecting unit adopts hot melt adhesive, four side gauge positioning to ensure accurate register and high precision. 3. The machine major motor and conveyor adopt dual frequency for speed control. Stable and saved energy. Feeding section Adopt adsorption type belt to feed the paperboard smoothly and continuously. Guiding section It can correct deviation of feeding effectively, when deviated box get to guide will be corrected, adjust the left or right side based on the box shape. Folding section It folds second and fourth which is the last part of the box forming, box forming is folded by upper pressure conveyor belt, folding knife, pressure roller, pressure bar. Full pressing section Pressure connect between main machine and transmission, collect the box orderly and guide the box to conveyor device. With the expansion of business scope,Shandong RiNo International Trade Co., Ltd quickly moves forward to the world and becomes an export-oriented company that integrates production and trade, includes paper packaging products, corrugated packaging machinery equipment, packaging product manufacturing equipment & consumables such as Corrugated Cardboard Machine, Printing Machine, Folder Gluer Machine, Automatic Die-cutting machine, Iron Wire and many other products,providing a full range of services from product to technical support.
Feature and characteristics : This machine is the last process equipment of the carton molding ,it is suitable for to gluing 3/5/7ply corrugated cardboard ,this machine is in high efficiency and the cardboard is beautiful.the most beneficial is that binder costs less than the stitching machine ,it is strong adhesion,easy operation and smoothly operation which is ideal equipment of exporting advanced cardboard processing . 1. working table : Photoelectricity control the feeding height automatically ,reduce labor intensity and improve work efficiency . 2. flatten correction : 1) After gluing and the second pressing ,the bonder is smooth and firm 2) With the automatic correction device ,make the cartons size correctly . 3) Fan airing function 4) Counting output devices ,with the Photoelectricity correlated body, when reaching to the const carton ,it outputs automatically . 3. transverse output : After the transverse output is according to the output signal ,stacking is convenient banding . 4. main parts : 1) gear reducer adopts famous brand . 2) Electric parts are from CHINT. 3) Output stripe is from BEKECI. 4) The whole team of paste head adopts the imported materials ,it is precision machining, resistant to wear and tear ,corrosion resistant,easy cleaning .
Semi-automatic carton folder gluer machine Folder gluer machine Carton folder gluer machine Model UG3-2800 Max. size (L+W) 2800mm Min. size (L+W) 600mm Max. size (W+H) 1515mm Min. size (W+H) 260mm Power 3kw Machinery length 5300mm Machinery weight 2150kg Machinery speed 60m/min This machine is suitable for folding and gluing all the kinds of paperboard. Easy to operate, no training is necessary. One minute quick order change. Carton glue Min. size is 260mm. It is the best choice for carton making factory. With the expansion of business scope,Shandong RiNo International Trade Co., Ltd quickly moves forward to the world and becomes an export-oriented company that integrates production and trade, includes paper packaging products, corrugated packaging machinery equipment, packaging product manufacturing equipment & consumables such as Corrugated Cardboard Machine, Printing Machine, Folder Gluer Machine, Automatic Die-cutting machine, Iron Wire and many other products,providing a full range of services from product to technical support. 1. U-2800 type Semi-auto gluer composes of main form and two small conveyers. 2. Main form including form, up and down working table, forepart feeding section, forepart proofread section, middle transportation section, middle press section, side carton delivery section, electric control system. 3. The machine imported famous brand electric spare parts, Siemens electric, OMROPN photoelectric switch, Japan TOKY counter, Taiwan mean well electric power supply. Gluer head adopt alloy material, antacid-base to keeping the gluer head for long life. Main motors adopt Taiwan motor. Feeding unit The feeding unit of the machine has two paper board to hold AB two pieces of papers, which helps to improve the production efficiency. Below adopt the air sucking structure, which is conducive to improve transport efficiency and accuracy. Connecting unit Connecting unit adopts hot melt adhesive, four side gauge positioning, ensuring transport efficiency and accuracy. Folding unit Folding unit adopts manual fold, which resolve the problem of hard to confirm fold place. To overlap margin can be controlled effectively.
The configurations of the machine FEEDER Equipped with ten wind suction belts with a width of 102mm; 10mm metal plate set the width by moving laterally,and embossing power idler pulley guides the paper output belt; setting baffles on both sides, and adjusting them back and forth as per the product style; equipped with two paper output blades which can be adjusted the anisomerous length according to the finished product; equipped with wind suction device and servo motor make it easy and prompt to operate and ensure accurate, automatic & serial feeding. Feeding partcan fold 400MM height paper, pneumatic upper feeding pressure to ensure stable and smooth paper-delivery, operators can control paper-feeding switch at any operational areas. ;Paper Regulating And Creasing Section: Equipped with back cone paper side mark positioning system. it will adjust the paperboard when the paperboard oblique, equipped with two sets press-wheels creasing devices.The creasing device is used to crease again when flexo printing die cut creasing result is not good, it make paperboards stay stable during folding, it¡¡£¤s fast and easy to adjust paper size. ;Bottom Folding: Three-board type structure, upper belt is main transmission, which ensure stable and smooth paper delivery. all paste tubes can be loaded and discharged; there are two paste tubes on each end with large capacity, they are chosen according to the actual situation; the paste volume in the tubes is adjustable, stable and easy to maintain; the thickness of the provided paste wheel is 5mm -8mm , and they can be customized according to special requirements; the paste tubes adopt sturdy, durable all-copper materials; the bottom folding consists of four bottom gluing equipments. Bottom Gluing Anti-Hook: Three-board type structure, upper belt is main transmission, which ensure stable and smooth paper delivery Equipped with two highpower servo motor to perform the functions of anti-hook the 4-6 corner boxes. One Imported glue spraying machine (America Valco two photoelectric three guns), cold glue. Hard-driving controller and interface adjustment can control servo motorfast and easy to a-djust the parameter. Photoelectric inspector can be installed on a fixed place, no need to move it, only need to enter parameter into touch interface, back anti-hook speed can be tracked by encoder inspector to ensure ac-curacy speed-testing. ;Folding: Three-board type structure, upper belt is main transmission, which ensure stable and smooth paper delivery , it consists of 80mm wide bottom belt and 80mm wide cornering belts; make the second folding 180;and the fourth folding180completelyanastomosedon both sides;The left and the right idler pulleys can be adjusted according to different positions so as to make the folding more smoothly; the low axletree supports and guides the belt to run accurately. The cornering belt is of independent drive and the speed is adjustable. 7) Conveyor: Adopts imported belts which are independent upper and lower main transmission and have moderate pliability, to avoid damaging products; the whole transmission part can be moved back and forth, press evenly, convey products in order which ensure perfect finished-product quality. Transmission part speed is automatically adjusted according to running speed of main machine as well as phototube. Also manually operate and speed are optional; functional devices are consisted of rubber wheels.
.Features of the machine: A)special features Product yield rate can reached 98%. Machine parts manufactured by cnc lathe with high precision resulting in little vibration and long service life. 20mm thickness steel wall dealt with computer control aligning and 5mm thickness square foundation pipe makes the machine strong and solid. The roller are made by 12mm thickness seamless steel pipe which are grinded, balance tested and chromed, ensuring roller vibration less than 0.03 mm. Four parts correction together with differential belt correction parts eliminates the fish tail problem effectively. Application ranges: a c.B. Ab flutes 3/5 layers corrugated board Glue even, fast-drying and easy to clean. Greatly reduce labor and material cost compared with stitcher. Iv.Features by parts I.Feeding unit: A) adopt high quality rubber vacuum belt, stocking and automatic input to ensure the efficiency of feeding. B) special design makes the adjustment simply, quickly and precisely. The side regulation, paper feed baffle and belt are separately operated, which make the order change easy. Ii.Gluing unit, A)the gluing width is 25mm/35 mm-gluing from bottom side. B)the glue box can be moved left or right according to the requirement of the corrugated board. C)the gluing amount can be adjusted. D)the glue box is made of stainless steel-big contain and easy for cleaning. Iii.Folding unit A)it uses high friction belt. The folding speed is controlled by frequency converter which can be controlled separately and synchronized with the main motor. B)motor driven for order change adjustment-fast and convenient. C)re-creasing roller, re-creasing knife, side roller and flapping plate can eliminate the fish tail effectively. Iv.Stacking and counting unit A)the flapping plate can help to reduce the fish tail phenomenon
Introduction of the machine: MJZXJ-1 model Automatic Folder gluer machine is composed of feeding part, glue and folding part, stacker part, speed controlled by PLC, paper width is adjusted by Touch PC, machine operation is easy and accurate, machine with automatic paper feeding function, automatic glue and fold function, automatic counting, automatic stacking and double conversion operation, the normal speed is 160pcs/min, Max. speed can be 220 pcs/min, this machine is your best choose which is energy-efficient and environmental protection.
Introduction of the machine: Mjzxj-1 model automatic folder gluer machine is composed of feeding part, glue and folding part, stacker part, speed controlled by plc, paper width is adjusted by touch pc, machine operation is easy and accurate, machine with automatic paper feeding function, automatic glue and fold function, automatic counting, automatic stacking and double conversion operation, the normal speed is 160pcs/min, max. Speed can be 220 pcs/min, this machine is your best choose which is energy-efficient and environmental protection.
Introduction of the machine: MJZXJ-1 model Automatic Folder gluer machine is composed of feeding part, glue and folding part, stacker part, speed controlled by PLC, paper width is adjusted by Touch PC, machine operation is easy and accurate, machine with automatic paper feeding function, automatic glue and fold function, automatic counting, automatic stacking and double conversion operation, the normal speed is 160pcs/min, Max. speed can be 220 pcs/min, this machine is your best choose which is energy-efficient and environmental protection.
Introduction of the machine: MJZXJ-1 model Automatic Folder gluer machine is composed of feeding part, glue and folding part, stacker part, speed controlled by PLC, paper width is adjusted by Touch PC, machine operation is easy and accurate, machine with automatic paper feeding function, automatic glue and fold function, automatic counting, automatic stacking and double conversion operation, the normal speed is 160pcs/min, Max. speed can be 220 pcs/min, this machine is your best choose which is energy-efficient and environmental protection.
Features and Characteristics This machine suits for folding and gluing all the kind of paperboard, easy operation and no training is necessary .One minute quick order change. Carton glue min size is 260mm. It is the best choice for carton making factory. Mode BZX2800 Max size (L+W)*2 2800mm Min size (L+W)*2 340mm Max size(W+H)*2 1515mm Min size (W+H)*2 260mm High of feeder 1000mm Power 4kw Machine length 5300mm Machine weight 2150kg Machine speed 60m/min
Paper folder gluer machine Folder gluer machine Paper folder gluer machine Speed 220m/min Paper 200-800g/m2, flute B,C,E,F Feeding way Automatically and continuously feeding Adhesive Solute type Power AC380V,7KW Weight 2200kg Overall size 750016501300mm The scope of count 0-999999 Model UG2-1400B UG2-1600B A MAX 1200mm 1200mm A MIIN 150mm 150mm B MAX 1020mm 1200mm B MIN 160mm 160mm C MIN 12mm 12mm D MIN 100mm 100mm F MIN 81mm 81mm Automatic gluing and folding machine and it consist of vacuum adsorption feeding part, gluing and folding part and stacking and counter part. It adopts frequency to change speed and controlled by standard PLC touch screen, easy operation and reliable. High speed and energy-saving and save labor. It is suitable for the paper, corrugated paperboard with 3,5 layer. With the expansion of business scope,Shandong RiNo International Trade Co., Ltd quickly moves forward to the world and becomes an export-oriented company that integrates production and trade, includes paper packaging products, corrugated packaging machinery equipment, packaging product manufacturing equipment & consumables such as Corrugated Cardboard Machine, Printing Machine, Folder Gluer Machine, Automatic Die-cutting machine, Iron Wire and many other products,providing a full range of services from product to technical support. Feature: 1.The machine is adopted with strengthened with single-side driving system, for steady running and easy maintenance. 2.The motor is adopted with infinitely variable speed drive and power saving. 3.It is adopted double face tooth rod adjusting in operation, with upper and lower linkage which can adjust in palace, precise and rapid. 4.Delivery is adopted with several thick belts cooperation with shaking motor to ensure its continuous, exact and automatic feeding. 5.It is adopted two side of the high-speed grinding equipment, which makes the glue more stable, firmly and glued. 6.The machine is suitable for unilateral paper box. And the special design is also available.
Introduction of the machine: MJZXJ-1 model Automatic Folder gluer machine is composed of feeding part, glue and folding part, stacker part, speed controlled by PLC, paper width is adjusted by Touch PC, machine operation is easy and accurate, machine with automatic paper feeding function, automatic glue and fold function, automatic counting, automatic stacking and double conversion operation, the normal speed is 160pcs/min, Max. speed can be 220 pcs/min, this machine is your best choose which is energy-efficient and environmental protection.
Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation
Automatic dough kneading machine have small capacity to big capacity with unit dough kneading machine also can connect production line for bread /pizza /biscuit and so on necessary machine ,sanitary ,high efficient ,durable,save cost ! welcome order!
Main features: 1. You can choose to use a single saw or a double saw for product stability, or a single saw for unstable products 2. Ensure the hygiene of the meat and ensure a smooth cutting surface 3. Waterproof design for quick cleaning 4. According to different uses, frozen meat, lamb chops, steak, fish 5. Adopting human-machine interface and intelligent operation panel 6. 30 sets of memory functions can be set 7. Feeding adopts servo motor, with high precision 8. The conveyor belt can be removed for cleaning Paramters : cutting thickness 1-50mm ,material thickness under 15cm . capacity 8-15times/min ,can adjustable.
Introduction of the machine: MJZXJ-1 model Automatic Folder gluer machine is composed of feeding part, glue and folding part, stacker part, speed controlled by PLC, paper width is adjusted by Touch PC, machine operation is easy and accurate, machine with automatic paper feeding function, automatic glue and fold function, automatic counting, automatic stacking and double conversion operation, the normal speed is 160pcs/min, Max. speed can be 220 pcs/min, this machine is your best choose which is energy-efficient and environmental protection.
