The configurations of the machine FEEDER Equipped with ten wind suction belts with a width of 102mm; 10mm metal plate set the width by moving laterally,and embossing power idler pulley guides the paper output belt; setting baffles on both sides, and adjusting them back and forth as per the product style; equipped with two paper output blades which can be adjusted the anisomerous length according to the finished product; equipped with wind suction device and servo motor make it easy and prompt to operate and ensure accurate, automatic & serial feeding. Feeding partcan fold 400MM height paper, pneumatic upper feeding pressure to ensure stable and smooth paper-delivery, operators can control paper-feeding switch at any operational areas. ;Paper Regulating And Creasing Section: Equipped with back cone paper side mark positioning system. it will adjust the paperboard when the paperboard oblique, equipped with two sets press-wheels creasing devices.The creasing device is used to crease again when flexo printing die cut creasing result is not good, it make paperboards stay stable during folding, it¡¡£¤s fast and easy to adjust paper size. ;Bottom Folding: Three-board type structure, upper belt is main transmission, which ensure stable and smooth paper delivery. all paste tubes can be loaded and discharged; there are two paste tubes on each end with large capacity, they are chosen according to the actual situation; the paste volume in the tubes is adjustable, stable and easy to maintain; the thickness of the provided paste wheel is 5mm -8mm , and they can be customized according to special requirements; the paste tubes adopt sturdy, durable all-copper materials; the bottom folding consists of four bottom gluing equipments. Bottom Gluing Anti-Hook: Three-board type structure, upper belt is main transmission, which ensure stable and smooth paper delivery Equipped with two highpower servo motor to perform the functions of anti-hook the 4-6 corner boxes. One Imported glue spraying machine (America Valco two photoelectric three guns), cold glue. Hard-driving controller and interface adjustment can control servo motorfast and easy to a-djust the parameter. Photoelectric inspector can be installed on a fixed place, no need to move it, only need to enter parameter into touch interface, back anti-hook speed can be tracked by encoder inspector to ensure ac-curacy speed-testing. ;Folding: Three-board type structure, upper belt is main transmission, which ensure stable and smooth paper delivery , it consists of 80mm wide bottom belt and 80mm wide cornering belts; make the second folding 180;and the fourth folding180completelyanastomosedon both sides;The left and the right idler pulleys can be adjusted according to different positions so as to make the folding more smoothly; the low axletree supports and guides the belt to run accurately. The cornering belt is of independent drive and the speed is adjustable. 7) Conveyor: Adopts imported belts which are independent upper and lower main transmission and have moderate pliability, to avoid damaging products; the whole transmission part can be moved back and forth, press evenly, convey products in order which ensure perfect finished-product quality. Transmission part speed is automatically adjusted according to running speed of main machine as well as phototube. Also manually operate and speed are optional; functional devices are consisted of rubber wheels.