I. Application Xenon lamp test chamber uses xenon arc lamp which can simulate all sunlight spectrum to reproduce destructive light wave in different environment. It can provide corresponding environment simulation and accelerated test for scientific research, product development and quality control. Xenon lamp test chamber can be used to select new materials, improve existing materials or evaluate the durability of materials after composition changes in the test, is a good simulation of different environmental conditions that materials exposed to sunlight changes. 2. Standards GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTM D2565 Comply with GB/T16585-1996, GB14522-93, GB/T16422.3-97 and ASTM D2565 standards. 3. Main technical parameters 3.1Humidity deviation: + 2.5% R.H (Humidity75%R.H), + 3% R.H (Humidity 75%R.H) (without light) 3.2 Types of Light Sources: imported air-cooled all-solar spectral long arc xenon lamp (average service life of 1600 hours or so) 3.3 Rainfall time: 1~9999 minutes, adjustable. 3.4 Rain cycle: 1~240 minutes, interval (break) adjustable 3.5 Light source wavelength range: 300-800nm 3.6 Humidifying power: about 2KW 3.7 Light source irradiance: 290~800nm: 100~600w/m2 300~890nm: 200~1200w/m2 340nm: 0.3~1.2w/m2 420nm: 20~120w/m2 3.8 Distance between arc center to sample frame: 350 ~ 380mm 3.9 Rotating speed of sample basket: 1r/min 3.10 Water spray cycle: Water spray time: 0 ~ 99h59min, continuous adjustable Stop time: 0 ~ 99h59min, continuous adjustable. 3.11 Lighting time: continuous programmed control. External dimension W x D x H: 1050 x 1050 x 1750 mm Internal dimension W x D x H: 500 x 500 x 600 mm Temperature range 080 Temperature deviation ±2 (without illumination) Humidity range 30 ~ 98% R.H Spectral wavelength 300nm ~ 800nm Xenon lamp power 1.8KW Life span 1600 hours Blackboard temperature 85±3 Power About 4KW; 220V±10%, 50HZ
Item Test Condition Test Method Value Unit MFR 190 C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
Item Test Condition Test Method Value Unit MFR 190C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
Product Description Additives Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 Combustion properties Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min - max result test - ip method ASTM Composition. Available products: JET A1/JP54, CRUDE OIL, BLCO, REBCO, SLCO, D2, D6, BIODIESEL, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Product Name Hot dipped galvanized round steel pipe/gi pipe pre galvanized steel pipe galvanised tube Material carbon steel Color silver Standard GB/T3091-2001 , BS 1387-1985 , DIN EN10025 , EN10219 , JIS G3444:2004 , ASTM A53 SCH40/80/STD , BS- EN10255-2004 Grade Q195/Q215/Q235/Q345/S235JR/GR.B-D/STK500 Brade MJ Thread
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube OD 20~405mm in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB,ASTM,BS,EN,JIS Material Chinese Grade, Q195, Q215 Q235, Q345 ASTM, Grade B,Grade C,Grade D,Grade 50 EN, S185,S235JR,S235JO,E335,S355JR,S355J2 JIS, SS330,SS400,SPFC590 Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery Ends Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment Technique Hot Rolled Or Cold Rolled ERW Package Covered With Tarpaulin, Containers Or In Bulk
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
OEM Available Unassembled Bee Frames Flat Pack 10 Brood Chamber Beehive Frames Basic Information Place of Origin: china Brand Name: SS-beehive frame Certification: ISO9001:2008 Model Number: Plastic Bee hive frame Minimum Order Quantity: 500pcs Price: $0.95-$1.3/pc Packaging Details: 51*25*50cm for wooden bee hive frames | chinese bee frame | beehive frame Delivery Time: 20-25 days after receiving your prepayment Payment Terms: TT, Western Union, L/C, D/A, D/P, MoneyGram Supply Ability: 100000 Piece/Pieces per Month Product Description Unassembled flat pack 10 brood chamber beehive frames Introduction of full deep plastic frames with foundation : Supersweet company is specialized in developing, producing and exporting bee products including propolis extract, royal jelly, beepollen,beeswax and beekeeping tools. Our products have sold very well in Asia, USA, Canada, Russia, Africa, USA, Japan and Europe owing to our competitive prices, quality oriented products, prompt delivery and our all-sided, efficient service. We also have the ability to develop new products as your design and sample Introduction of full deep plastic frames with foundation : 1)A grid which is placed over the top of the brood chamber between it and the super in order to prevent the queen laying eggs in the honey stores. 2)The worker bees are able to squeeze through the gaps in the excluder but the queen and drones are too large to pass through. 3) Queen excluders are only put on the hive if a super is present and therefore should not be used in winter if a super isn't left on the hive.
