Api Wellhead Spm Fmc Plug Valve And Repair Kit Suppliers and Manufacturers

Plug Valves are used to control flow opena and close. valve bodies are die-forged from premium alloy steel and heat treated to ensure the strength. plugs and seal segments are machined from heat treated alloy steel with special surface treatment to ensure reliable sealing capacity. Compact structure, easy operation and maintenance. Union connections on both ends. Available with manual, handwheel and hydraulic actuators with limiter switches. Valves can be serviced without removing from the line. Plug valves for standard service range are available in 1 " to 4 " bore sizes and 6,000psi to 20,000psi rated pressure. We has also developed plug valves for H2S service in accordance with NACE MR0175 criteria with 1 " to 4 " bore sizes and 10,000psi to 15,000psi rated pressure. JASON provides a customized design to meet each customerâ??s unique requirements. Recommended service: Fracturing, cementing,acidizing and testing lines

Lake Petro provides API 6A standard Plug Valve with standard Male and Female end connections, and a standard service rating up to 15000psi NSCWP. Plug valve provides flow control for oilfield applications such as cementing, fracturing, aciding, coiled tubing, sand control, and manifold trailers. Manual and Hydraulic operation available for standard and sour gas application. To meet the level standard of PLS3 and PR2, and can be interchangeable with SPMâ??s products. Lake Petro low torque and high pressure plug valve are made of high quality and high strength structural alloy steel. Strict heat treatment ensures even metallographic structure and loading capacity. The materials completely conform to USA ASTM and AISI standards and to be produced according to API Spec 6A. The connection available in LP thread, Tubing thread, butt weld, and non-pressure sealing end. Specification Size: 1â?? Plug Valve Low Torque (1 x 1) Male x Female FIG1502 1â?? Plug Valve Low Torque (1 x 2) Male x Female FIG1502 2â?? Plug Valve Low Torque (2 x 2) Male x Female FIG1502 3â?? Plug Valve Low Torque (3 x 3) Male x Female FIG1502 Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi). Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the clientâ??s request. Plug Valve Repair Kit Interchangeability Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPMâ?¢, FMCâ?¢ 2â?? and 3â?? DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings

Specification Size: 1â?? Plug Valve Low Torque (1 x 1) Male x Female FIG1502 1â?? Plug Valve Low Torque (1 x 2) Male x Female FIG1502 2â?? Plug Valve Low Torque (2 x 2) Male x Female FIG1502 3â?? Plug Valve Low Torque (3 x 3) Male x Female FIG1502 Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi). Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the clientâ??s request. Plug Valve Repair Kit Interchangeability Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPMâ?¢, FMCâ?¢ 2â?? and 3â?? DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings How to contact us?

High pressure plug valve produced by our company is designed for a wide range of standard and sour gas drilling production and well servicing appliancation with maximum pressure up to 15000psi. This kind valve features a compact structure, low torque,quick open/and close an easy operation. They are mostly applied on various oilfield manifold. -Main parts include body, bonnet,plug,segments and hand wheel. -Cylinder-shaped metal to metal sealing surface between plug and segments ensure reliable working performance. -Regular end connection is fig 1502M* F nions which can be customized per request. -Valve shall succesfully complete hydro test prior to delivery. features: 1) Plug valves, forged of quality high strength alloy steel, are low torque valves based on the technologies introduced from SPM. 2) 1",2"and 3" plug valves with rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available. 3) They can work in normal temperature, low temperature or H2S environments. Design features: 1.End connection of plug valve with sizes in English system maybe union or male/female thread (LP,TBG)and they can be freely connected with products in international market 2.Maintenance and repair of valve body can be done without removal ,and no special tools are needed for removal 3.The plugs have very good sealing performance Visible :there is a visible positioner where we can see fi valve is open or closed .Brake spring will limit the position of valve Applications: Fracking Cementing Well Service Processes: Well completion

High pressure plug valve produced by our company is designed for a wide range of standard and sour gas drilling production and well servicing appliancation with maximum pressure up to 15000psi. This kind valve features a compact structure, low torque,quick open/and close an easy operation. They are mostly applied on various oilfield manifold. -Main parts include body, bonnet,plug,segments and hand wheel. -Cylinder-shaped metal to metal sealing surface between plug and segments ensure reliable working performance. -Regular end connection is fig 1502M* F nions which can be customized per request. -Valve shall succesfully complete hydro test prior to delivery. features: 1) Plug valves, forged of quality high strength alloy steel, are low torque valves based on the technologies introduced from SPM. 2) 1",2"and 3" plug valves with rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available. 3) They can work in normal temperature, low temperature or H2S environments. Design features: 1.End connection of plug valve with sizes in English system maybe union or male/female thread (LP,TBG)and they can be freely connected with products in international market 2.Maintenance and repair of valve body can be done without removal ,and no special tools are needed for removal 3.The plugs have very good sealing performance Visible :there is a visible positioner where we can see fi valve is open or closed .Brake spring will limit the position of valve Applications: Fracking Cementing Well Service

SPM Original Plug valve and repair kit, 2" X 1"Plug Valve Repair Kit: Part Number: 4L11769

Product Description: Lake Petro provides API 6A standard Plug Valve with standard Male and Female end connections, and a standard service rating up to 15000psi NSCWP. Plug valve provides flow control for oilfield applications such as cementing, fracturing, aciding, coiled tubing, sand control, and manifold trailers. Manual and Hydraulic operation available for standard and sour gas application. To meet the level standard of PLS3 and PR2, and can be interchangeable with SPM products. Lake Petro low torque and high pressure plug valve are made of high quality and high strength structural alloy steel. Strict heat treatment ensures even metallographic structure and loading capacity. The materials completely conform to USA ASTM and AISI standards and to be produced according to API Spec 6A. The connection available in LP thread, Tubing thread, butt weld, and non-pressure sealing end. Specification Size: 1 Plug Valve Low Torque (1 x 1) Male x Female FIG1502 1 Plug Valve Low Torque (1 x 2) Male x Female FIG1502 2 Plug Valve Low Torque (2 x 2) Male x Female FIG1502 3 Plug Valve Low Torque (3 x 3) Male x Female FIG1502 Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi). Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the client's request. Plug Valve Repair Kit Interchangeability Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPM, FMC and 3 DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings.

SPM Type Plug Valve Repair Kit Fig 1502 Interchangeability Parts code:4L11769 and 4L11982,etc KUOFU have 1" 2" and 3" size Plug valve repair kits,can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPM Valve repair kits, which is including plug, seal segment, side segment, elastomer seals, and grease fittings

API 6A 2" 1502 FMC/SPM type plug valves with repair kit Performance: 1 material and working pressure: forged of quality high strength alloy steel, are low torque valves based on the technologies introduced from SPM. 1",2"and 3" plug valves with rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available. 2 the working surrounding: They can work in normal temperature, low temperature or H2S environments.The model of plug valve available: SF42-1" 2",SF70-1" 2",SF105-1" 2",SF42-2" 2",SF70-2" 2",SF100-2" 2",SF42-3" 3",SF70-3" 3",SF105-3" 3",rated: 6000psi(42MPa)~15000psi(105MPa). 3 the type of end connection: End connections of plug valves with sizes in English system may be union or male/female thread (LP,TBG), and they can be freely connected with products in international market. 4 the advantage for maintenance : can be done without removal, and no special tools are needed for removal; 5 good sealing performance: Visible: There is a visible positioner where we can see if valve is open or closed. Brake spring will limit the position of valve. 3"hand wheel opener is suitable for opening in low temperature. Valves can be opened freely and flexibly.

Design Features 1.Stable pressure-bearing: equipped with changeable elastic nitrile rubber sealing ring, firm wall thickness; it is able to bear pressure under high pressure line; 2.Convenient to exchange: union joints on both ends and can be exchanged with LP, UN internationally due to inch size is applied; 3.Simple maintenance: it is unnecessary to dissemble from pipeline to maintain or repair plug valve, and no need to use special tools in case of disassembling; 4.Good sealing and preservation: the plug cock is fine finished by special coating technology; 5.Visible valve position: the symbols of fully open and close of valve are clearly marked on the plug cock cap. The tripping spring restricts valve in proper positions. Main Technical Parameters of Plug valve High pressure Plug valve Specifications buckling size cold working press Terminal connection type Buckle model SF42 SF70 SF105 1" 2" 2" 2" 3"3" 42Mpa(6000psi) 70Mpa(10000psi) 105Mpa(15000psi) Internal thread ,External thread(LP,NU) union fig1002 union fig1502 union fig602 M M MF F F Remark:F-threaded joint,M-sphere joint;LP-pipe thread, UN-un-thickening tubing thread How to place an order:SF105-MF-2"2"-fig 1502 union plug valve Example:SF105-MF-2"2"-fig 1502 Structure of union plug valve

SPM Type Plug Valve Repair Kit Fig 1502 Interchangeability Parts code:4L11769 and 4L11982,etc Kuofu equipment have 1" 2" and 3" size Plug valve repair kits,can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPM Valve repair kits, which is including plug, seal segment, side segment, elastomer seals, and grease fittings

China Weco Plug Valve Fmc Plug Valve Product Description The plug valve is a necessary part that is utilized on the high pressure manifold for the cementing and fracturing operations in oil field and also suitable to control over the similar high pressure fluid. Featuring the compact structure, easy maintenance, small torque, rapid opening and easy operation, the plug valve is ideal for the cementing and fracturing manifolds. The plug valve consists of the valve body, plug cap, plug and etc. The plug valve is available with the union 1502 inlet and outlet preparations(also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing. The metal to metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability. The valve can be easily opened or closed even under the 10000psi high pressure.

Kuofu Equipment provide FMC Weco ULT type low torque plug valve repair kit, which are manufactured by API 6A certified factories, replacement repair kit for each type, covering size from 1"-3" up to 20000psi. Our repair Kits are replacements for damaged parts of Plug valves. PN. P516137 REPAIRKIT FOR FMC WECO HAMMER VALVE 1â?³ FIG 1502---4.5KG PN. P538985 REPAIRKIT FOR FMC WECO HAMMER VALVE 2³ FIG 1502, ULT150---5KG PN. 3265500 REPAIR KIT FOR FMC HAMMER VALVE 3³ FIG 1502 ULT150---13KG

High pressure plug valve produced by our company is designed for a wide range of standard and sour gas drilling production and well servicing appliancation with maximum pressure up to 15000psi. This kind valve features a compact structure, low torque,quick open/and close an easy operation. They are mostly applied on various oilfield manifold. -Main parts include body, bonnet,plug,segments and hand wheel. -Cylinder-shaped metal to metal sealing surface between plug and segments ensure reliable working performance. -Regular end connection is fig 1502M* F nions which can be customized per request. -Valve shall succesfully complete hydro test prior to delivery. features: 1) Plug valves, forged of quality high strength alloy steel, are low torque valves based on the technologies introduced from SPM. 2) 1",2"and 3" plug valves with rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available. 3) They can work in normal temperature, low temperature or H2S environments. Design features: 1.End connection of plug valve with sizes in English system maybe union or male/female thread (LP,TBG)and they can be freely connected with products in international market 2.Maintenance and repair of valve body can be done without removal ,and no special tools are needed for removal 3.The plugs have very good sealing performance Visible :there is a visible positioner where we can see fi valve is open or closed .Brake spring will limit the position of valve Applications: Fracking Cementing Well Service Processes: Well completion