Tq series of casing tongs are widely used for making up and breaking out pipes or casings. The tong heads are designed open type and can freely clamp and escape from the casing. Casing tongs are safe, realiable and easy to handle with high mobility. They are designed and manfactured according to api spec 7k.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
TQ Series Hydraulic Casing Tong Product Description TQ series of casing power tongs are widely used for making up and breaking out pipes or casinga in diameters of 4~13 3/8 inch. the tong heads are designed "open"type and can freely clamp and escape from the casing.TQ casing power tongs are safe, raliable and easy to handle with mobility.this series of tongs can be connected to computer controlling units and can serve as ideal well mechnical tool for surface operations in oil fields. national invention patent of the tongs has been got. the tongs are designed and manufactured according to API 7K specification for drilling equipment. TQ series of hydraulic casing tongs are widely used for making-up and breaking-out of casings or pipes. The series of casing tongs are wholly hydraulic driven. The tongs are configured with a large-torque motor. And per form mechanical gearchange. Structure is simple and operation is safe. The casing tongs can be supplied with torque device to perform computer monitoring and managing on pressure, torque and rounds. The casing tong are designed and manufactured according to SY/T5074 standard and API spec 7Kspecification for drilling and well servicing equipment. Products Drawing TQ Series Hydraulic Casing Tong Main Parameters Casing Power tongs Technical specification: Model TQ178/16 TQ340/35 TQ356/55 Size Range mm 101.6-178 114.3-340 114.3-356 inch 4-7 4 1/2 - 13 3/8 4 1/2 - 14 Max Pressure Mpa 18 16.6 psi 2610 2400 Working flow L/min 110-160 110-140 gpm 29.3-42.7 29.3-37.3 Air Pressure Mpa 0.5-0.9 psi 72-130 Max. Torque kN.m 16 35 55 ft.lbf 11800 25800 40560 Speed rpm 9-79 3.5-86 4-70 Size mm 1450*760*740 1580*900*880 1770*960*850 in 57*30*29.1 62.2*35.4*34.6 69.7*37.8*33.5 Weight Kg 580 780 1150 lb 1280 1720 2530 TQ series hydraulic casing power tongs technical specification: Model TQ178/16Y TQ340/35Y TQ356/55Y TQ508/70Y TQ610/60Y TQ340/85Y Size rang mm 101.6-178 114.3-340 114.3-365 244.5*508 244.5-610 114.3*340 inch 4-7 4 1/2 - 13 3/8 4 1/2 - 14 9 5/8 -20 9 5/8-24 4 1/2-13 5/8 Max. Pressure Mpa 18 20 18 psi 2610 2900 2610 Working Flow L/min 110-160 110-170 120-180 110-170 gpm 29.3-42.7 29.3-45.4 32-48 29.3-45.4 Max.Torque kN.m 16 35 55 70 60 85 ft.lbf 11820 25800 40560 51600 44250 62680 Speed rpm 9-79 8-90 4.8-61 4-43.6 5-45 3.2-45 Size mm 1500*760*800 15800*900*860 1770*960*780 2080*1280*760 2330*1310*840 1995*1150*680 inch 59*30*31.4 62.2*35.4*33.8 69.7*37.8*30.7 82*50.4*30 91.7*51.6*33 78.5*45.3*26.8 Weight Kg 560 760 1100 1550 2100 1700 lb 1230 1670 2420 3410 4620 3740
The Casing Tong KHT9625 is used make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation.
YAMAHA OUTBOARD ENGINES HS Code 840820 PRICE = US$2,000/PIECE CIF ORIGIN: THAILAND PACKAGE: TONS MIN ORDER:5 PIECES DESCRIPTION As well as its indestructible (almost) composite shaft, the great little M18 outboard is tough in every other sense too - from its hard-working, permanent magnet 12-Volt motor and its hardwearing, weed-resistant power propeller right down as far as its hard-to-damage casing. In short, it goes where you go. With no drama. Electric-Drive Technical specs Amp Draw 42 Voltage 12 Mount Feature Lever lock Max Thrust (kg) 18.2 Speeds (FWD/REV) 5 FWD/3 REV Digital Maximizer False Shaft Length 914 mm Battery Meter False Control Telescoping Tiller
Basic Info. Model NO. PTD250-12 Installation Packaged Rechargeable Chargeable Weight (Kg) 68kg Color Black/Ivory White Terminal Type Lead / Bolt & Nut Safety Explosion-Proof Battery Case ABS Separator AGM Sealed Type Sealed Transport Package Carton / Wooden Case / Pallet Specification 520x268x243 mm Trademark PUSTUN Origin Guangzhou, China HS Code 8507200000 Production Capacity 600PCS/Day Product Description We produce VRLA/SLA Battery, Industrial Battery, 2V/6V/12V Batteries, Rechargeable Battery, Gel Battery, Deep Cycle Battery, sealed lead acid battery and so on. Valve regulated lead acid deep cycle series batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications. Advanced Features: 1. Environmentally friendly 2. Completely Maintenance-Free 3. Non-Spillable construction design. 4. Wide Operating Temperature Range(-20�°C~+60�°C) 5. Long Life (12-15 years designed life) 6. Explosion Proof 7. Valve Regulated & High Discharge Rate Capability 8. Low Self Discharge 9. Independent of Position 10. Ease of Shipment 11. No need of balanced charge or boost
We have good quality Used and New Laptops of all brands. Product Name Used laptops Processor CPU Series: Intel Core i7 4-generation family CPU Type: Intel Core i7 4702MQ CPU frequency: 2.2GHz Core frequency: 3200MHz Bus Specifications: DMI 5 GT / s Three cache: 6MB Core Architecture: Haswell Core / thread count: quad-core / eight thread Storage Device Memory Capacity: 4GB (4GB Ã?? 1) Memory Type: DDR3L (low voltage version) 1600MHz Hard disk capacity: 500GB Hard Description: Support the expansion turn mSATA SSD hard drive Drive Type: No built-in optical drive Display Touch screen: does not support touch Screen Size: 14 inches Aspect Ratio: 16:9 Screen Resolution: 1366x768 Screen technology: LED backlit, matte glare mask Graphics Graphics Type: Dual Graphics (fever-level graphics card + integrated graphics) Graphics chip: NVIDIA GeForce GTX 760M + Intel GMA HD 4400 Memory Capacity: 2GB Memory Type: GDDR5 Memory Interface: 128bit Number of stream processors: 768 Multimedia devices Camera: 720p HD webcam Audio System: Built-in audio chip Speaker: Built-in speaker Microphone: Built-in microphone Network Communications Wireless LAN: 802.11b/g/n wireless protocol Wired LAN: 100Mbps Ethernet card I / O interfaces Data interface: 1 Ã?? USB2.0 +2 Ã?? USB3.0 Video Interface: VGA, HDMI Audio interface: headphone / microphone combo interface Other interfaces: RJ45 (network interface), power connector Reader: Multi-in-1 card reader Input Devices Pointing device: Touchpad Keyboard Description: Full-size keyboard Power Description Battery: 6-cell lithium battery, 5900 mA Life time: 5 hours, the specific time depending on use environment Power adapter: 100V-240V 90W AC power adapter adaptive Exterior Laptop Weight: 2Kg Length: 339.2mm Width: 239.5mm Thickness: 26.4mm Shell material: composite material Case Description: Black Notebook accessories Packing list: Host x1 notebook Power adapter x1 Power cord x1 Manual x1 Warranty card x1 Shipping DOCS 1. Commercial Invoice 2. Packing list 3. Certificate of Origin 4. Bill of Loading 5. Form A/Form E 6. Other documents are according to customer's
PHONE SCRAP HS Code 85437090 PRICE = US$400/TON CIF ORIGIN: THAILAND PACKAGE: 1KG,5KG,10KG,15KG,25KG,50KG MIN ORDER:100 TONS DESCRIPTION Product Description Dear client WE HAVE VERY HIGH YIELD GOLD RECOVERY CPU CERAMIC PROCESSOR SCRAPS AND COMPUTER MOTHERBOARD SCRAPS FOR SALE We can supply cpu ceramic processor scraps Intel 186 / 286 / 386 / 486 / Pentium / Pentium Pro / i860 / i960 Cyrix 486 / 586 / MIIIBM 486 / 586 / 686 Motorola 68000 / 88000 series NEC Toshiba MIPS series: R4000 / R8000 / R10000 / R12000 1-Gold Top Cpu... 2-Gold Top&Bottom Cpu.. 3-Intel 186/286/386/486/Pentium/Pentium Pro/i860/960/... 4-Cyrix486/586/MIIIBM486/586/686/ .. 5-RAM (memorys)... We can supply on monthly basis around 10-50 tons per month of Ceramic cpu scrap for gold recovery and scrap motherboards and lan cards. We also supply sample order from 100 KGS. Our prices changes according to your order. For bulk order or sample order, contact us for our quote. Specification and use: Usage: For electrical industries Suitable to manufacture numerous electrical components, cables, cans, etc 1.Motherboard And other Computer Scrap 2.Untested condition 3.For recycling 4.Stock available PS / ABS bales scrap-waste from electric and electronic devices (TV SHELL-CASE, COMPUTERS etc.) CAN LOAD IN 1X40\'HC CONTAINER APROX. 22 TONS (-+10%) We can sell you you the following scrap: Computer Mother Boards Computer Finger Boards Computer Memory Computer Processors Computer Power Supplies Computer Hard Disks Computer Floppy Drives Computer CD Rom Computer Cases Computer Wires Computer Keypads Computer Mouse Computer UPS or Lead batteries from UPS Cell Phone Handsets Cell Phone PCB Boards Cell Phone Batteries Lithium Cell Phone Batteries Nickel Cell Phone LCDs Cell Phone Housings Cell Phone Chargers
Basic Info. Model NO. LFP51.2-300 Electrolyte LiFePO4 Color White Usage Solar/ Marine/ Telecom / Electric Mobility Warranty 3 Years OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 720*260*580mm Transport Package Wooden Case Specification 120kg Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description Factory Wholesale Deep Cycle 51.2V300ah Lithium Ion Batteries LiFePO4 Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery. Product Parameters Nominal Voltage 51.2V Nominal Capacity 300Ah Energy 15.36KWh Combination mode 16S1P Cycle Life â?¥6000 Cycle, 80%DOD, 25�ºC BMS conï¬?guration 16S150A Operating voltage range 41.6V~59.2V Rated charge and discharge current 150A Peak current 160A Continue @170A 3s Rated charging and discharging power 7.68Kw Peak power 8.192Kw Continue @8.704Kw 3s Short-circuit current 0.762Ka@100us Communication mode CAN, RS485 Parallel number Recommend 6 in parallel(Maximum support 16 in parallel) Remote data Bluetooth optional/Wiï¬? Weight 120kg Dimensions (L*W*H) mm 720*260*580mm Operating temperature Charging: 0�ºC~+50�ºC / Discharge: -10�ºC~+60�ºC Relative humidity 0~95% Storage temperature
Item Aluminum Wire Temper F, O, H112, T3, T351, T4, T5, T6, T651, etc. Material 1000 Series:1010,1030,1050,1060,1080,1100,1235,1435,etc. 2000 Series:2011,2014,2017,2024,2124,2A12,2A16,2A06,etc. 3000 Series:3002,3003,3004,3005,3104,3105,3204,3030,3A21,etc. 4000 Series:4004,4005,4032,4043,4047,4A01,4A13,etc. 5000 Series:5005,5025,5040,5052,5056,5083,5754,5A05,etc. 6000 Series:6003,6060,6082,6083,6063,6061,6101,6A02,etc. 7000 Series:7003,7005,7050,7075,7475,7A01,7A03,7A05,etc. Diameter 0.05-10 mm Surface Finish Brushed,polished,mill finish, power coated,sand blast Standard package Wooden pallets, Wooden cases or according to customerâ??s requests Payment terms : TT only
API 7k Casing Manual tong Product information 1. Structure of Casing Mannual Tongs Description The casing tongs are designed and manufactured in accordance with the API Spec 7K Specification for Drilling and Well Servicing Equipment and the National Standard for the Petroleum Gas Industry SY/T 5035 Elevator Links Elevators and Tongs which is a useful tool applied to make up and break out drill pipes, coupling hoop of the drill pipe joint casings casing hoops etc. When raise drill tool up and fall it down. Changing hinge jaws and handling shoulders of latch lug jaws can adjust the handling size of the tongs. 2. Main Features 1) API standard; 2) Very Good Quality; 3) After-sale Service.
ZQ drill pipe power tong is an ideal well head tool for oil drilling, widely applied for making-up and breaking-out in offshore and onshore drilling operations and workoveroperations. Open-throat design of the ZQ series allows the tongs to escape from drillingpipe freely with high mobility. The tong is a combination of spinning tong and torque tong. It substitutes cathead, manual tong and rotary rope in making-up and breaking-out. The tongs are designed and manufactured according to API Spec 7K â??Specification for Drilling Equipmentâ?�
Inverter Grade Thyristors (Capsule Type) INSEL Rectifiers India Thyristors may also be necessary to act in the opening switch mode as well. Such applications may contain those where voltage is reapplied to the pulse power switch shortly after closing and the switch needs to have improved blocking capability or the transfer energy needs to be controlled. In these applications, the switch needs to have turn-off capability to decrease the natural turn-off time (tq) of the device. The device is operated in GTO mode with the suitable commutating gate drive. Thyristors may be used to bond a source of stored energy, such as a capacitor to a load, or to bypass and protect the load in the case of a crowbar circuit. In these pulsed power applications where the rate of rise of current is very fast, the pulse power switch is acting as a closing switch and ordinary phase control thyristors (SCRS) are probable to fail due to the high di/dt experienced? Thyristors or SCRs (silicon controlled rectifiers). The Phase Control SCR provides phase-control of ac signals with a line frequency of 50-60 Hz. The Inverter SCR is used in pulsed power applications connecting higher frequencies. The main difference between the two families is the turn-off time (tq). Inverter SCRs typically have a tq of less than 30 microseconds (�µs). Similar phase control SCRs has tq ratings of several hundred �µs. Explore Inverter Grade Thyristors at Insel Rectifiers Welcome to Insel Rectifiersâ?? your go-to source for cutting-edge power solutions. Delve into the world of innovation and explore our exceptional range of inverter-grade thyristors, highlighted by the advanced Capsule Inverter Thyristor series. Unleashing Power Precision At Insel Rectifiers, we take great pride in offering unmatched solutions tailored for modern power systems. Our inverter-grade thyristors, particularly the revolutionary Capsule Inverter Thyristor series, have been intricately engineered to redefine the dynamics of power control in the constantly evolving technological landscape. Efficiency Redefined Our Capsule Inverter Thyristors boasts advanced technology and a state-of-the-art design that ensures optimal performance in every application. The unique capsule design goes beyond enhancing efficiency; it significantly contributes to the overall reliability of these thyristors. Industries seeking reliable and efficient power control solutions find our Inverter Grade Thyristors to be the preferred choice.
Specifications: They are designed and manufactured according to API Spec 7K. Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of pipes. They are designed and manufactured according to API Spec 7K.
1. Main Technical Parameters: (1). Model: DU. Size of Slip Bodies: 4 1/2". DP O.D. (in): 2 3/8"; 2 7/8"; 3 1/2"; 4"; 4 1/2". DP O.D. (mm): 60.3; 73.0; 88.9; 101.6; 114.3. (2). Model: DU. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (3). Model: DU. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. (4). Model: DUL. Size of Slip Bodies: 4 1/2". DP O.D. (in): 2 3/8"; 2 7/8"; 3 1/2"; 4"; 4 1/2". DP O.D. (mm): 60.3; 73.0; 88.9; 101.6; 114.3. (5). Model: DUL. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (6). Model: DUL. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. (7). Model: SDU. Size of Slip Bodies: 4 1/2". DP O.D. (in): -. DP O.D. (mm): -. (8). Model: SDU. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (9). Model: SDU. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. 2. Product Description: Drill pipe slip is a kind of handling tools specially used to handle drill pipe during the oil well drilling operations for the exploration of petroleum and natural gas. It is an essential tool for coupling and uncoupling. There are three types of DU series Rotary Slips: DU, DUL and SDU. They are with large handling range and light weight. There into, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. 3. Features: (1). Suitable for shallow hole drilling, medium depth drilling and deep drilling. (2). 100% customer satisfaction for quality and reliability. (3). After machining all slips undergo 100% inspection. (4). Different types for clients choice for different depth well and different size drill pipe. 4. Material: Carbon Steel. 5. Processing Type: Casting. 6. Machine Type: Drilling Tool. 7. Use: Well Drilling.
1. Main Technical Parameters: (1). Model: DCS-S. Drill Collar O.D. (in): 3-4. Drill Collar O.D. (mm): 76.2-101.6. Weight (kg): 51. Weight (lb): 112. Use in Insert Bowl No.: API or No. 3. (2). Model: DCS-S. Drill Collar O.D. (in): 4-4 7/8. Drill Collar O.D. (mm): 101.6-123.8. Weight (kg): 47. Weight (lb): 103. Use in Insert Bowl No.: API or No. 3. (3). Model: DCS-R. Drill Collar O.D. (in): 4 1/2-6. Drill Collar O.D. (mm): 114.3-152.4. Weight (kg): 54. Weight (lb): 120. Use in Insert Bowl No.: API or No. 3. (4). Model: DCS-R. Drill Collar O.D. (in): 5 1/2-7. Drill Collar O.D. (mm): 139.7-177.8. Weight (kg): 51. Weight (lb): 112. Use in Insert Bowl No.: API or No. 3. (5). Model: DCS-L. Drill Collar O.D. (in): 6 3/4-8 1/4. Drill Collar O.D. (mm): 171.4-209.6. Weight (kg): 70. Weight (lb): 154. Use in Insert Bowl No.: API or No. 3. (6). Model: DCS-L. Drill Collar O.D. (in): 8-9 1/2. Drill Collar O.D. (mm): 203.2-241.3. Weight (kg): 78. Weight (lb): 173. Use in Insert Bowl No.: API or No. 3. (7). Model: DCS-L. Drill Collar O.D. (in): 8 1/2-10. Drill Collar O.D. (mm): 215.9-254. Weight (kg): 84. Weight (lb): 185. Use in Insert Bowl No.: No. 2. (8). Model: DCS-L. Drill Collar O.D. (in): 9 1/4-11 1/4. Drill Collar O.D. (mm): 235-285.7. Weight (kg): 90. Weight (lb): 198. Use in Insert Bowl No.: No. 2. (9). Model: DCS-L. Drill Collar O.D. (in): 11-12 3/4. Drill Collar O.D. (mm): 279.4-323.9. Weight (kg): 116. Weight (lb): 256. Use in Insert Bowl No.: No. 1. (10). Model: DCS-L. Drill Collar O.D. (in): 12-14. Drill Collar O.D. (mm): 304.8-355.6. Weight (kg): 107. Weight (lb): 237. Use in Insert Bowl No.: No. 1. 2. Product Description: Drill Collar Slips are specially developed to handle drill collars during well drilling. There are three types of DCS Drill Collar Slips: S, R, and L. They can accommodate drill collars from 3 in (76.2 mm) to 14 in (355.6 mm) O.D.. The handling sizes can be adjusted by changing the quantity of inserts or slip body. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. 3. Features: (1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body. (2). 100% customer satisfaction for quality and reliability. (3). After machining all slips undergo 100% inspection. (4). Different types for clients choice for different depth well and different size drill pipe.
