Api Oilfield Downhole Tools Cementing Plug Suppliers and Manufacturers

The non-rotating cementing plugs significantly reduce the drill out time, which leads to high efficient and cost saving. The cup design on top and bottom of both plugs provides a sure seal against the casing wall to prevent mixing of cement slurry and displacement fluid. The top plug seats into the bottom Plug and seals against it to lessen the possibility of additional cement slurry displacement, while also promoting good bonding at the bottom of the casing. No metal parts are used, so the plugs are competely PDC drillable.

We have the following tools for down Hole operation available: 1.Anti-pollution lifting tool 2.Screw type drill tool 3.Down hole fishing tool 4.Side-drill tool 5.Packer 6.Other special drill tools According to customer's requirement.

Construction equipment (home improvement, electrical supply, pipes and fitting etc..), heavy machinery: mining equipment, excavator, drilling, and so on paper and packaging, production line: kraft paper, plastic and paper box, aluminum foil, plastic wrap, boxes, paper cups, take a way box and so on.. renewable energy: solar panels, inverter, photovoltaic chemical and raw material: soda ash, titanium, pe, ppe .Our company hangzhou xing ying technology co., ltd.(astrioglobal) also provides exporting, quality control, international logistics and consulting/negotiation.

1. About the Manual: The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2. CONSTITUTION: Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly 3. Usage: It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc. Specifications We can produce series of downhole motors in different sizes, as 57(21/4"),73(23/4"),89(31/2"),95(33/4"),120(43/4"),127(5"),165(61/2"),172(63/4"),178(7"),185(71/4"),197(73/4"),203(8"),216(81/2"),244(95/8"), etc.

The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction Working principle The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps Drilling out Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately.

Cementing Head Type The cementing head is special tool for pumping slurry and releasing plug and can be connected with casing. Features: * Main parts are made from AISI4145H alloy steel. * Quick-latch adapter is designed to offer easier, faster and safer makeup for two-stage cementing. * It is manufactured utilizing API grade steels with API threads. * Positive lever indicates plug releasing. * Balance pipe is developed.

1. About the Manual The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 3. CONSTITUTION Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly Mud motor, Downhole Motor used for HDD machine Rock conditation Drilling, Rock tools Usage It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc. A Variof Types &ety the Capabilities In accordance with the actual drilling needs, we push out high, midiem and low speed downhole motors, of a variety of types with different functional configuration and application for all working conditions.

1. About the Manual: The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2. CONSTITUTION: Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly 3. Usage: It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc. Specifications We can produce series of downhole motors in different sizes, as 57(21/4"),73(23/4"),89(31/2"),95(33/4"),120(43/4"),127(5"),165(61/2"),172(63/4"),178(7"),185(71/4"),197(73/4"),203(8"),216(81/2"),244(95/8"), etc.

As a manufacturer and a supplier we produce cementing tools since 1997, and now we have almost 400 workers, the products cover cementing head/plug, stage collar, float equipment, centralizer and so on. Please contact me if you have need, and my email is

Description: Cementing Plugs are used to remove the mud during cementing operations. There are two types of Cementing Plugs used in the cementing process: Bottom Cementing Plug and Top Cementing Plug. The Top Cementing Plug has a solid body that provides positive indication of contact with the landing collar and bottom plug through an increase in pump pressure. The Bottom Cementing Plug is launched ahead of the cement slurry to minimize contamination by fluids inside the casin

Description: Cementing Plugs are used to remove the mud during cementing operations. There are two types of Cementing Plugs used in the cementing process: Bottom Cementing Plug and Top Cementing Plug. The Top Cementing Plug has a solid body that provides positive indication of contact with the landing collar and bottom plug through an increase in pump pressure. The Bottom Cementing Plug is launched ahead of the cement slurry to minimize contamination by fluids inside the casing

Description: Cementing Plugs are used to remove the mud during cementing operations. There are two types of Cementing Plugs used in the cementing process: Bottom Cementing Plug and Top Cementing Plug. The Top Cementing Plug has a solid body that provides positive indication of contact with the landing collar and bottom plug through an increase in pump pressure. The Bottom Cementing Plug is launched ahead of the cement slurry to minimize contamination by fluids inside the casing prior to cementing. Available in standard and non-rotating types.

All products will be made according to API and related international standard as per customers' requirements. Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer. Hardfacing type: HF1000, HF2000, HF3000, HF4000 Send your inquiry message to Anna Zhang in the comments section below:

Description: Cementing Plugs are used to remove the mud during cementing operations. There are two types of Cementing Plugs used in the cementing process: Bottom Cementing Plug and Top Cementing Plug. The Top Cementing Plug has a solid body that provides positive indication of contact with the landing collar and bottom plug through an increase in pump pressure. The Bottom Cementing Plug is launched ahead of the cement slurry to minimize contamination by fluids inside the casing prior to cementing. Available in standard and non-rotating types.

Cementing Plugs are used to remove the mud during cementing operations. There are two types of Cementing Plugs used in the cementing process: Bottom Cementing Plug and Top Cementing Plug. The Top Cementing Plug has a solid body that provides positive indication of contact with the landing collar and bottom plug through an increase in pump pressure. The Bottom Cementing Plug is launched ahead of the cement slurry to minimize contamination by fluids inside the casing prior to cementing. Available in standard and non-rotating types.

Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 1. Material: High manganese steel 2. Standard: API 3. Features: Big torque, high effective, wide flow rate range, running stable and long using time. 4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and double-bent construction.

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates.