API 7k Casing Manual tong Product information 1. Structure of Casing Mannual Tongs Description The casing tongs are designed and manufactured in accordance with the API Spec 7K Specification for Drilling and Well Servicing Equipment and the National Standard for the Petroleum Gas Industry SY/T 5035 Elevator Links Elevators and Tongs which is a useful tool applied to make up and break out drill pipes, coupling hoop of the drill pipe joint casings casing hoops etc. When raise drill tool up and fall it down. Changing hinge jaws and handling shoulders of latch lug jaws can adjust the handling size of the tongs. 2. Main Features 1) API standard; 2) Very Good Quality; 3) After-sale Service.
Specifications: They are designed and manufactured according to API Spec 7K. Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of pipes. They are designed and manufactured according to API Spec 7K.
Specifications: They are designed and manufactured according to API Spec 7K. Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of pipes. They are designed and manufactured according to API Spec 7K.
The Casing Tong KHT9625 is used make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation.
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q4"~17"-135 Type SDD Manual Tong Type SB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 4~17 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, SDD Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 4~17. (5).Rated Torque range from 80kN·m to 135kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type SDD. 10.Rated Torque(kN*m): 80~135. 11.Size Range: 4"~17". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
tongs are available in a variety of models, sizes and types to handle casings, drill collars, sucker rods and tubing including chrome tubulars For price, specification and other details please contact us.
Casing Size: OD: 4-1/2" - 20" (114.3 mm - 508 mm) Tubing Size: OD: 2-3/8" - 4-1/2" (60.3 mm - 114.3 mm) WT: 0.205" - 0.635 mm; Length: R1 (4.88 m - 7.62 m), R2 (7.62 m - 10.36 m), R3 (10.36 m - longer). Standard: API 5CT, JIS G3439, BS EN ISO 11960, NF M87-207 Material: H40, J55, K55, N80, C75, L80, C90, T95, Q125 Usage: Conveying gas, water, oil, natural gas For price, specification and other details please contact us
Manual tongs are neccessories tools applied to make up and break out pipes. Changing Plug jaws and latch steps can adjust different handing size fo the tongs, they are designed and manufactrued according to API spec 7K specification for drilling and well servicing equipemt.
Tq series of casing tongs are widely used for making up and breaking out pipes or casings. The tong heads are designed open type and can freely clamp and escape from the casing. Casing tongs are safe, realiable and easy to handle with high mobility. They are designed and manfactured according to api spec 7k.
1. Main Technical Parameters: (1). No. of Latch Lug Jaw: 1#. Size Range: 2 3/8"~3 1/2" (60.3~88.9 mm). Rated Torque (kN*m): 27. (2). No. of Latch Lug Jaw: 2#. Size Range: 2 7/8"~4 1/4" (73~108 mm). Rated Torque (kN*m): 27. (3). No. of Latch Lug Jaw: 3#. Size Range: 4"~5 3/4" (101.6~146.1 mm). Rated Torque (kN*m): 27. (4). No. of Latch Lug Jaw: 4#. Size Range: 5 3/4"~7" (146.1~177.8 mm). Rated Torque (kN*m): 20. (5). No. of Latch Lug Jaw: 5#. Size Range: 7 1/4"~8 5/8" (184.2~219.1 mm). Rated Torque (kN*m): 20. (6). No. of Latch Lug Jaw: 6#. Size Range: 9 5/8"~10 3/4" (244.5~273.1 mm). Rated Torque (kN*m): 14. 2. Product Description: Manual tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of the tongs. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q2 3/8"~10 3/4"--27 Type WWC Manual Tong Type WWC Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling. The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps. The available range of manual tong is from 2 3/8~10 3/4 inch. 3. Features: (1). API 7K certified quality assured. (2). Easy to operation to holding different size by changing the lug jaw. (3). Spare parts available after sales, all parts are traceable. (4). Size range from 2 3/8"~10 3/4". (5). Rated torque range from 14kN·m to 27kN·m. 4. Certification: API 7K. 5. Condition: New. 6. Color: Required. 7. Place of Origin: Shandong, China (Mainland). 8. Minimum Order: 1 Set. 9. Material: Carbon Steel. 10 Processing Type: Forging. 11. Machine Type: Drillnig Tool. 12. Use: Well Drilling. 13. Processing Time: 20 days. 14. Supply Ability: 400 sets / per month. 15. Payment Terms: T / T; L / C; Western Union. 16. Packing and Delivery: (1). Packing Details: Standard Export Package. (2). Port: China Main Port.
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 1/2"~13 3/8"-75 Type SB Manual Tong Type SB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 1/2~13 3/8 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, SB Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 1/2~13 3/8. (5).Rated Torque range from 40kN·m to 75kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type SB. 10.Rated Torque(kN*m): 40~75. 11.Size Range: 3 1/2"~13 3/8". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 50sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 1/2"~17"-90 Type DB Manual Tong Type DB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 1/2~17 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, DB Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 1/2~17. (5).Rated Torque range from 55kN·m to 90kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type DB. 10.Rated Torque(kN*m): 50~90. 11.Size(in): 3 1/2"~17". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 3/8"~12 3/4"-75 Type B Manual Tong Type B Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 3/8~12 3/4 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, B Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 3/8"~12 3/4". (5).Rated Torque range from 55kN·m to 75kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type B. 10.Rated Torque(kN*m): 55~75. 11.Size Range: 3 3/8"~12 3/4". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 20days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
Electric Beeswax Foundation Machine Beeswax Embossing Machine Wax Foundation Machine Place of Origin: china Brand Name: Super-Sweet Certification: ISO Model Number: SS-CCM-01 Minimum Order Quantity: 1 set beeswax foundation sheet machine/beeswax embossing machine/beesw Price: $200-$1000 Packaging Details: 1set/plywood case Apicultural equipments China supplies 450mm aluminum alloy electric manual beeswax foundation Delivery Time: 7-10days Payment Terms: L/C,T/T,Western Union,MoneyGram Supply Ability: 2000 Piece/Pieces per Month beeswax foundation sheet machine/beeswax embossing machine/beesw Name: Beeswax Foundation Machine Foundation Machine After-sales Service Provided: Yes Foundation Machine Roller Material: Aluminum Alloy Foundation Machine Available Type: Manual And Electric,fully Automatic Beeswax Foundation Cell Size: 4.9mm,5.4mm Ect Beeswax Foundation Machine Other Size:: Can Make According To Request Use: Beeswax Foundation Sheet Machine Capacity:: 40-52 Kg/hour Roller Length:: 350mm-750mm Foundation Machine Use Range: For Beekeeping Voltage:: 220/380v Roller Diamete:: 205mm High Light: beeswax embossing machine, beeswax foundation mold