1. Standard: API 2. Pressure: 2000psi~20000psi 3. Sie: 3-1/8"~26-3/4" Spacer spool, in accordane with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no prevision for suspension of tubular members and which may have no prevision for sealing of tubular members. We manufacture the sapcer spool in all size and pressure ratings suitable for Well Head extension, BOP spacing, and Choke, Kill, and production Manifold applications. We can produce all kinds of API 6A double studded adapter for wellhead use. It is important for wellhead use. It is important device to connect the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
1. Standard: API 2. Pressure: 2000psi~20000psi 3. Sie: 3-1/8"~26-3/4" Spacer spool, in accordane with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no prevision for suspension of tubular members and which may have no prevision for sealing of tubular members. We manufacture the sapcer spool in all size and pressure ratings suitable for Well Head extension, BOP spacing, and Choke, Kill, and production Manifold applications. We can produce all kinds of API 6A double studded adapter for wellhead use. It is important for wellhead use. It is important device to connect the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
API 6A Standard spacer spool and drilling spool 1. Standard: API 2. Pressure:2000PSI-20000PSI 3. Size: 3 1/8"--26 3/4" Spacer spool, in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no provision for suspension of tubular members and which may have no provision for sealing of tubular members We manufacture the spacer spool in all sizes and pressure ratings suitable for Well Head extension, B.O.P. spacing, and Choke, Kill, and Production Manifold applications. spacer spool usually has the same nominal end connections. spacer spool identification consists of naming each end connection and the overall length (outside of end connection face to outside of end connection face). We can produce all kinds of API 6A double studded adapter for wellhead use. It is the important device to connection the defferent flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification. DSA (Double Studded Adapter) API 6A 10000PSI 7-1/16" Double Stud Adapter 7-1/16"x13-5/8" 5000psi,10000psi,15000psi API 6A Materials:AISI4130 API 6A 10000PSI 7-1/16" Double Stud Adapter 7-1/16"x13-5/8" 5000psi,10000psi,15000psi API 6A Materials:AISI4130.
Drilling and civil engineering bentonite is made by API and OCMA standardIt can be used as low solid phase mud in under ground civil engineering and drilling field  The specifications Item Mud  yieldM3T Filter  loss ML30min Yield  1b100ft2 Moisture  Wet Sieve Analysis0074mm gel strength HH01 18 12 3xPV 12 4 18 25 40 HH02 1218 1218 3xPV 12 4 15 20 30
Drilling Spool is the parts which are often used in the oilfield for well head extension, choke and kill manifold, etc. It is designed and manufactured is accordance with API 6A and API 17K standard, it usually has the same nominal end connections. Eternal company specializes on the manufacturing all sizes and pressure ratings used for oilfield applications. So many spools have been applied on many oilfields all over the world. Drilling spools allow the smooth circulation of mud during drilling operations and usually have the same nominal top and bottom end connections. Side outlet may differ from each other. Top, bottom, and side end connections can be hub end or flanged. We can also design customizable ideal spools for reliable and consistent performance on their production system. Our products have been exported to many countries, such as Russia, South Africa, India etc. Send your inquiry message to Anna Zhang in the comments section below:
We are supplier and exporter of Hematite Powder. Hematite Powder is a mineral, coloured black to steel. It is mined as a main of iron ore and used as a weighting agent in oil drilling. It is the mineral form of iron(III) oxide (Fe2O3). Fluids weighted with API Hematite Powder contain fewer solids by volume than, making higher mud fluids possible. API Grade Hematite Powder is applicable in all types of drilling fluids, including freshwater, seawater and oil-base muds. It is used as a density increasing product, used as a weighting agent and in the paint industry. Hematite is also a harder mineral than Barite so it is more resistant to particle size degradation. High Density Hematite Powder API Grade -SG = 5.19 - 5.47 -Fe2O3 = 96.70% -Fe = 71.82% -SiO2 = 0.89% -Mesh Size (passing at 98%) = 325
We Supply Baryte Powder also called Barium Sulphate(Baso4) From India. Specific gravities like 3.8,4.00.4.10,4.15 and 4.20.API Baryte Powder for Oil&Gas Drilling.
drilling spool and adapter can be designed according to customer's all kinds of models and sizes to meet the requirements in work site. There are three kinds of connecting models for BOP connection and outlets, including flanged, studded and clamped-in style. Gasket groove is line welded by stainless according to API Spec 6A, so as to prolong the using period and decrease the maintaining cost.
* Packing Unit: 1L/12Box * Type: 100% Low Viscosity Synthetic Premium Engine Oil * Key Benefits: - Formulated with High-Performance Additives - Full Synthetic (100% Group 3 Base Oil) - API SP, ILSAC GF-6B / GF-6A Certified * Available Capacities: 1L, 4L, 6L, 20L, 200L(For MOQ and pricing, please inquire) * SAE Grade: 0W-20
Specifications 1) tubing head api 6a spec 2) pressure:2000-15000psi 3) temperature: p~u 4) material: aa-ff 5) medium: oil/gas/fluid Api 6a tubing head Brief introduction: Tubing heads have straight bore bowl with 45 degree landing shoulders design which avoids damage to sealing areas by drilling tools and prevents wedging of tubing hangers, bowl protectors and test plugs. The upper flange is supplied with lockdown screws for packoff re-nergization and tubing hanger retention. The lower flange includes a grease fitting and orifice for testing of secondary seal. We could supply all models of casing head forging, and we carry out api 6a standard.We could finish the final machining according to the customers' requirements
Hematite Powder is a mineral, coloured black to steel. It is mined as a main of iron ore and used as a weighting agent in oil drilling. It is the mineral form of iron(III) oxide (Fe2O3). Fluids weighted with API Hematite Powder contain fewer solids by volume than, making higher mud fluids possible. API Grade Hematite Powder is applicable in all types of drilling fluids, including freshwater, seawater and oil-base muds. It is used as a density increasing product, used as a weighting agent and in the paint industry. Hematite is also a harder mineral than Barite so it is more resistant to particle size degradation.
Wellhead drilling spool 11" x 3k - 13 5/8" x 3koil well api 16a driling spool 11" x 3k - 13 5/8" x 3k overview of the drilling spool 11" x 3k - 13 5/8" x 3k the 11" x 3k - 13 5/8" x 3k drilling spool is used to connect with bop for oilfield drilling work.The wellhead drilling spool is made of alloy steel and heat-treated. It is used on the oil and gas well which is with a pressure of less than 105mpa. It is tested according to api 16a specificationbefore shipping to be used safely.The 11" x 3k - 13 5/8" x 3k spool applies to drilling high pressure oil and gas well, the connecting of the by passage of the spool with the valves and pipes will play not only a role of blowout and choking , but also a role of connecting the bop with the wellhead. installation and maintenance of wellhead drilling spool* being used when connecting with the bop and the casing head.*.The steel ring grove should be cleaned before installation.*.Tighten studs averagely of connecting the spool with the bop. specification of the wellhead drilling spool 11" x 3k top flangebottom flange11"2000psi (279.4mm14mpa)11"2000psi (279.4mm14mpa)11"2000psi (279.4mm14mpa)13-5/8"2000psi (346.1mm14mpa)11"3000psi (279.4mm21mpa)11"3000psi (279.4mm21mpa)11"3000psi (279.4mm21mpa)13-5/8"2000psi (346.1mm14mpa)11"3000psi (279.4mm21mpa)13-5/8"3000psi (346.1mm21mpa)11"5000psi (279.4mm35mpa)13-5/8"3000psi (346.1mm21mpa) wellhead drilling spool 11" x 3k - 13 5/8" x 3koil well api 16a driling spool 11" x 3k - 13 5/8" x 3k
API 6A Standard spacer spool and drilling spool 1. Standard: API 2. Pressure:2000PSI-20000PSI 3. Size: 3 1/8"--26 3/4" Spacer spool, in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no provision for suspension of tubular members and which may have no provision for sealing of tubular members We manufacture the spacer spool in all sizes and pressure ratings suitable for Well Head extension, B.O.P. spacing, and Choke, Kill, and Production Manifold applications. spacer spool usually has the same nominal end connections. spacer spool identification consists of naming each end connection and the overall length (outside of end connection face to outside of end connection face). We can produce all kinds of API 6A double studded adapter for wellhead use. It is the important device to connection the defferent flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
Metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles.These are manufacturered in accordance with specific tolerances on CNC machines. Ring Joint Gaskets fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable). Ring Joint Gaskets are as per API- 6A. The units are manufactured in a variety of standard and special materials For price and specification please contact us
These are used in oil and gas drilling industries and other industries also Types - Barites API Grade Bentonite API Grade Calcium Carbonate Hematite For price, specification and other details please contact us
Data Headers to provide additional connections for Pressure Gauge, thermowell, and sampling or injection ports. The Data headers allows connection of pressure and temperature monitoring equipment. We can offer Data headers specific to the user requirements and with either Hammer union ends or API-6A Flange connections. All Data Headers are supplied with complete test certificates For price and specification please contact us
Hematite Powder is a mineral, coloured black to steel. It is mined as a main of iron ore and used as a weighting agent in oil drilling. It is the mineral form of iron(III) oxide (Fe2O3). Fluids weighted with API Hematite Powder contain fewer solids by volume than, making higher mud fluids possible. API Grade Hematite Powder is applicable in all types of drilling fluids, including freshwater, seawater and oil-base muds. It is used as a density increasing product, used as a weighting agent and in the paint industry. Hematite is also a harder mineral than Barite so it is more resistant to particle size degradation For price and specification please contact us
Specifications: Drilling Bentonite API 13 (Section 9) or as per clients demand Bulk Ship Lot 25000 MT (+/- 5%) Packing: Loose
Our Bentonite Products: Foundry Grade: The foundry-grade bentonite powder is used as a bonding material in the preparation of moulding sand for the production of iron, steel, and non-ferrous casting. Sodium Bentonite is the preferred binding agent for use in the bonding of metals and foundry sands, although calcium Bentonite enhances foundry sandâ??s flow ability and figures in the manufacture of nonferrous mouldings. Drilling Grade (API Grades, OCMA) Drilling-grade bentonite is a naturally occurring clay containing the clay minerals of smectite. It can also contain accessory minerals, such as quartz, mica, feldspar, and calcite. The Drilling Grade Bentonite Powder is used as a mud constituent for oil and water well drilling. Its roles are mainly to seal the borehole walls, remove drill cuttings, and lubricate the cutting head. Our Drilling Grade Bentonite Powder has high swelling and good colloidal nature, which can increase the viscosity of suspension in the drilling mud and also can increase the lubrication of drilling, as well as for the rig-freeing agent. Piling Grade Bentonite slurry is one of the most common excavation fluid used in constructing diaphragm walls. The gel strength and viscosity properties of the bentonite clay allow for cutting suspension and removal. Piling Grade Bentonite Powder is used traditionally as a support and lubricant agent in walls and foundations, tunnelling, and horizontal drilling. Viscosity and plasticity play a very important role. Bentonite slurry walls are used in construction, where the slurry wall is a trench filled with a thick colloidal mixture of Bentonite and water. Cattle Feed Grade Our Feed Grade Bentonite is Natural & selected from affluent Mines of Kutch. This Bentonite is used as an animal feed supplement, as a palletizing aid in the production of feed pallets, as well as a flow ability aid. It slows the passage of feed through the digestive system increasing the uptake of nutrients. Bentonite has an affinity for some of the active elements of toxin products formed by bacteria in the digestive tract, and its application in feed allows more rapid weight gain of livestock.
API 6A Standard spacer spool and drilling spool 1. Standard: API 6A 2. Pressure:2000PSI-20000PSI 3. Size: 3 1/8"--26 3/4" Drilling spool,in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Drilling spool is wellhead sections which have no provision for suspension of tubular members and which may have no provision for sealing of tubular members We manufacture the drilling spool in all sizes and pressure ratings suitable for Well Head extension, B.O.P. spacing, and Choke,Kill,and Production Manifold applications. spacer spool usually has the same nominal end connections. drillingspool identification consists of naming each end connection and the overall length (outside of end connection face to outside of end connection face). Characters: 1)Made from high-strengh alloy and processed specially with heating treatment. 2)Designed and manufactured with reference to API 6A technical specifications. 3)Fit for Hydrogen sulfide H2S resistant service, manufactured with reference to NACEMR-0175 technical specifications. 4)Top & bottom connections and outlets per customer design requirements by either flanged or clamp connections. 5)All stell tanks are welded with staintess stell for long-term anti-corrosion. 6)Used for high-pressure drilling, in conjunction with flat valve for preventing blowout and connecting BOP.
