Spare parts, toyota spare parts, toyota, armored vehicles, original car parts, car tires, toyota land cruiser 200 vehicles.
Construction chemistry materials for repair of concrete, coatings for concrete, waterproofing materials, adhesives, specialized and customized materials..
Offer of unique garden swing
Miniminex led Flameproof luminaire - miniminex Type 591 40 01 I m2 ex d i mb Zóna 1, 21 • zona 2, 22 Use: for illumination in mines and underground spaces susceptible to firedamp. Also for other industrial places (indoor, outdoor or under shelter). See specification. Technical description: the luminaire consists of a body, led mod¬ule and flange with protective glass. Body and flange are castings from grey cast iron.Steel pendant with eye 18 mm is fixed to the up¬per part. On the sides of body are two cable glands for cable 17-19 mm (using the sealing rings 451.2717) and for cables 21 to 23 mm (using the sealing rings 451.2718). In the body is mounted led module consisting of a plate mounted leds cree xt-e type connected with cooling unit. Wattage lamps can be regulated (25 w / 12.5 w) by changing the output current (700 ma / 350 ma) for power supply. Flange with glass cover is framed and bolted to the body with six screws m8. The contact surface between the flange and the body of the fixture is a cylindrical joint of conclusion „d“. Protective hardened glass is resistant against mech. Shock min. 7 j and is fixed in the flange, the connection is filled with a polyurethan putty. A steel hinge is fixed to the flange as the mobile one and enables to hang up the flange during mounting or dismounting. Luminaire is treated with polyester powder coated, steel components are galvanized and chromated. Maximum section of connecting conduc¬tors is 4 mm2. The luminaire is designed as through-phase operation (five-core cable), when used as end with one cable gland blanking element. Packing carton is filled with polyurethane foam instapak. Weight 14kg
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex. Technical description: luminaire consists from body, basic plate and Flange with protective glass. Body and flange are castings from grey cast Iron treated with polyester powder paint. Luminaire can be suspended By the steel pendant with 2 eyes o 18 mm on the upper part of the Body. Connecting area (increased safety „d“), with connecting clamps and 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed With cover from grey cast iron. Steel basic plate with electric parts And reflector is fixed in the body. Flange with glass cover is screwed In the body and secured with locking screw and silicon sealing Against unlocking, thread shapes a rift of flameproof enclosure „d“. Protective hardened glass resistant against mech. Shock min. 7 j is Fixed to the flange, the connection is filled with polyurethane putty. A steel hinge is fixed to the flange as the mobile one and enables to Hang the flange during mounting or dismounting. Steel parts are Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak. Luminous sources: Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w Carton (mm/pcs) 560x300x30mm, weight 24 kg/pc
Technical description: luminaire consists from body, basic plate and flange With protective glass. Body and flange are castings from grey cast iron treated With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the Upper part. Connecting area (increased safety „d“), with connecting clamps And 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the Body. Flange with glass cover is screwed in the body and secured with locking Screw and silicon sealing against unlocking; thread shapes a rift of flameproof Enclosure „d“. Protective hardened glass is resistant against mech. Shock min. 7 j and is fixed in the flange, the connection is filled with a polyurethan putty. A steel hinge is fixed to the flange as the mobile one and enables to hang Up the flange during mounting or dismounting. Steel parts are galvanized And chromated. Luminaire is equipped with protective guard from galvanized Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting Terminal block enables interchanging 2 phases (4-core cable). Luminaire Is equipped with 2 inner and 1 outer earthing clamps for conductive connection. Luminaire is designed as the through-way one, when used as end piece, there is Necessary to use blinding plug (optionally on order). Packing carton is filled with Polyurethane foam instapak. Luminous sources: Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next Carton (mm/pcs) 430x240x240, weight 18 kg/pcs
2G Ex de IIC T4-T6 Gb II 2G Ex de IIC T4-T6 Gb II 2D Ex t IIIC T max.surf Db Luminaire consists of body, basic plate and flange with protective glass. Body and flange are made of AlSi alloy treated with polyester powder paint. Luminaire can be suspended by the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is aluminium basic plate with electro-module mounted inside the luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000, Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing output current of the LED driver 700mA/350mA. Flange with protective glass is screwed in the body and locked with securing screw; thread shapes a rift of flameproof enclosure „d“. Protective hardened glass is resistant against mech. shock min. 7 J and is fixed in the flange; the connection is filled with polyurethane putty. The mobile steel hinge is fixed to the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak. luminous sources: EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
Ii 2g ex de iic t6 gb Ii 2d ex t iiic t 60 °c db Luminaire consists of body, basic plate and Flange with protective glass. Body and flange are made of alsi alloy Treated with polyester powder paint. Luminaire can be suspended By the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is Aluminium basic plate with electro-module mounted inside the Luminaire. Electro-module consists of 20 x led cree xp-g (luminous Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000, Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing Output current of the led driver 700ma/350ma. Flange with protective Glass is screwed in the body and locked with securing screw; thread Shapes a rift of flameproof enclosure „d“. Protective hardened glass is Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection Is filled with polyurethane putty. The mobile steel hinge is fixed to The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
1.. Uveïte podrobnosti a technické specifikace 2G Ex de IIC T3-T6 Gb II 2G Ex t IIIC Tmaxsurf.-table Db Technical description: Luminaire consists of body, basic plate and flange with protective glass. Body and flange are castings from AlSi alloy. Steel hinge with eyes o 18 mm is fixed on the upper part of the body. Connecting area (increased safety „e“), with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables o 9 – 16 mm (HSK-M-Ex for cables 10 – 16 mm for versions F), is placed on the side of the body. This area is covered with cover and sealed with silicon. Steel basic plate with electric parts and reflector is fixed in the body. Flange with protective glass is screwed into the body and secured with securing screw against unlocking; the thread creates a rift of flameproof enclosure „d“. Protective cover from hardened glass is resistant against mechanical shock min. 7 J and is fi xed in fl ange; the connection is filled with a putty (polyurethane glue). Steel mobile hinge is fixed on the flange and enables to hang up the flange under body during mounting or exchanging light source. AlSi parts of luminaire are treated with polyester powder paint; steel parts are galvanized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamps. Luminaire is designed as through-way one. When it is used as the end piece, there is necessary to replace one cable gland with blind screw V-Ex or to blind one unused gland with blind plug HSK-V-Ex (versions F: one cable gland must be replaced with blinding screw V-Ms-VMQ-Ex). Blinding parts are not attached - delivered optionally on order only. Versions K are equipped with protective guard from steel wire. All types can be equipped with lampshade (optionally on order only). Packing carton is filled with polyurethane foam Instapak luminous sources: HWL 500W E40, SPC A T CL 250W E40, HQL 250W E40, NAV-E350 350W E40 and other. NOTE ! Ballast box 205.1 can be used for HP Mercury and sodium lamps.. Carton 560 cm x 350 cm x 300cm , Weight 12 kg/pc
Industrial, Special and flameproof luminaires.
.Mezzanine levels, racking and shelving, warehouse vehicles (including forklifts, stackers and carts), warehouse management software, stock control systems, optimization consulting on existing warehousing facilities
Swing combines dining set and swing with special motion.
Building material, decoration material, textile material, used clothing, furniture, office equipment, construction machinery, used automotive /automotive parts, clothing apparels, tissue paper & tissue holder, tissue paper, baby wet tissue, electrical, and electronics products, computer accessories, used products.Export
This VWT-FFS-4372 Double Loop tunnel construction and its technology equipment are optimized for a professional use of sportsmen, army troop as well as general public and schools. Optimization of the fan can be performed on any other scenario of the use of the tunnel (like only sport tunnel utilization, or only to tourism utilization, military and special training purposes, or eventual their combination...). Optimization means a proper selection of tunnel dimensions, fans and engines parameters for proposed purposes to gain an optimal ratio between desired performance and operational costs. Dimensions and technical parameters of this tunnel offer the best conditions for the professional requirements on speed, space and height. Its size provides ample space for the entire training even of group formations of eight skydivers. Tunnel with 4,3 m of flying chamber diameter is the perfect place for training of army parachutes and special troops with their specific equipment. From tourist's point of view, the tunnel offers comfortable space even for flying couples with instructors or other smaller groups. Thanks to a comprehensive fan optimization the, tunnel allows operation of profi-flights as well as fun-flights at very low operation costs. Materials and Dimensions Air conductors in the aboveground part of the tunnel are made of sheet steel. All steel elements are provided with corrosion protection. Tunnel skin is made by sound-insulation panels KINGSPAN. Net dimensions of the tunnel are: width 30 m depth 10 m height 32 m The typical depth of foundation of ground concrete structure is 7,5 m. The typical height of the tunnel above the ground is 24 m. Flight chamber Flight chamber consists of a glass part, which is on its top connected to a steel construction of tunnel shell. Lower part of the flight chamber is purely cylindrical with a diameter of 4,3 m and a height of 5 m. The upper part of a flight chamber is made from steel and its height is 9 m. The shape of this part of flight chamber is gradually changing from a circular diameter of 4,3 meters to circular diameter 4,3 x 4,3 m. The overall maximum height of flight chamber 14 m The height of the glass part of flight chamber 5 m Diameter of flight chamber 4,3 m Maximum speed Maximum air speed at which the tunnel can be operated continuously is 80+ m/s (300+ km/h). Motors, fans and electronic equipment The air stream is formed by four vertically stored fans, each of 3.15 m in diameter, which are powered by a 4 electro-motors, each rated at 355 kW. RPM are controlled and regulated by 4 frequency changers from ABB. Control and monitoring system of the tunnel is realized using SIEMNS technology. Cooling Tunnel cooling is provided by an active cooling unit with a maximum power consumption of 330 kW, which corresponds to a maximum cooling performance of 1 000kW. Cooling compressor unit is located outside the tunnel and two pairs of optimized coolers installed in the tunnel design ensures a comfortable temperature in the flight chamber even during very warm summer period. During cold seasons, from the certain threshold temperature, the compressor unit is automatically switched to dry coolers, which maximize utilization of outside cold air and rapidly decrease the power consumption (up to 30 kW). -------------------- Offered price represents VWT-FFS-3672 /3.6m , double loop technology ,FOB Cz Praha 20x22ft containers
LACTINMILKS are skimmed and full cream milk powders blends and replacers. They are entirely made from milk ingredients only or composed from milk and vegetable ingredients. The fat content may vary from 1% up to 45 %, the protein content may vary from 7% up to 30%. Products are used mainly in industry - for baking, ice cream and confectionery purposes.
European Nutrilon 1-5, Special milks like Nutrilon HA, Nutrilon AR etc. 1 palett
Humanitarian anti-mine boots - ZEMAN AM-S (with Sympatex lining) Special all leather boots with protection against anti-personnel contact mines with charge of 70g High Explosives (TNT). Equal to 50g charge of of Semtex. The boots have been developed in co-operation with a leading Czech expert in EOD. Anti-mine boots are characterised by a robust and resistant design with long-term service life and they do not contain any metallic parts. Boots can be optionally provided with Cambrella lining (Model AM-C) or with Sympatex membrane giving comfort climate (Model AM-S). All this special safety features providing boots with the total weight of only 2,980g. ZEMAN AM boots are protected by patent. Warranty period: 24 months Packaging: 1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
Our company, a Taiwan funded enterprise, has been specialized manufacturing screw nut machine and hardware for 20 years. Dongguan factory was founded in 1994. All the machine parts are mainly imported from Taiwan. If you have any need. please contact me, many product can be made in our company. Also have 8B, 11B41B, M5, M6 More detail can talk together.
Spray dried oat drink with high fibre content. This product belongs to special group of products, which are beneficial for digestive system and preventive against colonorectal cancer and help to maintain on optimal weight due to high fibre content Oat Milk contains high percentage of fibre, vitamines A, D, E and B1, minerals: calcium, potassium, sodium, magnesium and iron. Oat milk is consumed as drink, shakes, may be used fro cooking adn baking, for sauces and soups, pancakes, cakes Shelf life: 18 months
Collection profire Fire-fighting rescue action top boot, hydrophobized leather, with fast-action lacing and zip with safekeeping spike special tu cap antistatic construction sympatex membrane lining nitrile rubber outsole with steel anti-perforation insert, resistant to oil, fuels, acids and temperature 300c anatomic replaceable innersole washable in water 40c, absorbing tread energy in heel. This boots are certified and approved to be used by fire-fighting rescue crews. Boot stiffened with steel toe puff. 1 pair/box or 1 pair/pe sack, 5 pairs of one size/carton
