Aluminum Sheet And Aluminum Plate Suppliers and Manufacturers

aluminum sheet aluminum plate Size: customized according to your requirements The main products are as follows: aluminum checker plate includes one/ single bar, two bar, three bar, small five bar, big five bar, pointer shaped, etc 1 - Series of aluminum alloy: 1050/1060/1070/1100/1235; 2- Series of aluminum alloy: 2A12 /2024; 3- Series of aluminum alloy: 3003/3004/3005/3104/3105; 4- Series of aluminum alloy: 4017; 5- Series of aluminum alloy: 5052/5754/5251/5182/5083/5086//5005; 6- Series of aluminum alloy: 6061/6063/6082/6016/6101; 7- Series of aluminum alloy: 7075; 8- Series of aluminum alloy: 8011/8021/8079/8006.

Aluminum alloy brazing cladding plate,foil,sheet Thickness :0.2-60 Width 15-700 Tempers O.H12-H19, H22-H21 Coil inter diameter(mm): 75,150,200 Coil Outer diameter(mm):200-1500.

Thickness from 0.009 - 10mm, width from 38-1750mm, including aluminum alloy 3003, 3005, 3105, 1100, 1050, 1200, 1060, 5005, 5052, 8011 etc, both hard and soft temper available by your requirement. About 2MT /pallet.

Aluminum Alloy In Plate

Product Description The 7075 alloy is capable of high strength as developed by heat treating. It also has excellent properties at low temperatures. Machinability: It is best to machine this alloy in the annealed condition. Machining capability is good and oil lubricants should be used. Welding: Resistance welding is the only preferred method of joining AL 7075 alloy. Gas welding should be avoided and use of arc welding may result in degradation of corrosion resistance. Electrical conductivity 36% of copper. Shear strength in O condition is 22 ksi and for the T6 condition it is 48 ksi. Our Services Pre-sales Service: 1. For partial materials, we can supply the sample free (without the freight charge). 2. Customers are welcomed to visit the factory. After Sales Service: 1. Quality assurance certificate will be supplied with products 2. The customer can claim for compensation if the products are not check with the sample. 3. The products could be returned due to products quality. Payment terms 30% deposit by T/T before production, and the other 70% balance should be paid by T/T before delivery. And we also accept L/C. Company Information Overview Henan Mingtai Aluminum Co., Ltd. (referred to as Mingtai Al. for short) is a large modern aluminum processing enterprise that integrates processing, manufacturing, and scientific research. It primarily engaged in the producing and selling. The company consists of two main production bases, one is located in Gongyi City and the other lies in the high and new technology industrial development zone in Zhengzhou City, Henan Province, with an area of 250,000 square meters. Mingtai Al. has over 2600 employees, ten continuous casting production lines and more than 44 other large-scale processing equipments with an annual production of 450,000 tons. Scope of Service Presently, the companys products cover aluminum alloy products of Series 1xxx, Series 2xxx, Series 3xxx, Series 4xxx, Series 5xxx, Series 6xxx, Series 7xxx, Series 8xxx of different sizes. Main products include CTP plate stock, PS plate stock, aluminum electrode capacitor foil, foil stock, deep-draw stock, brazing sheet, alloy sheet and plate, etc. Those products are widely applied in industries including automobile making, traffic and transportation, packaging and containers, buildings and decorations, electrical and electronic, printing, etc. Development Strategy In 2016, Mingtai Al. will continue to stick to the enterprise spirit of solidarity, endeavor, objectivity and innovation; practice the management concept of green and sustainable development, rely on the high speed development of science and technology strive for the goal oftaking a lead in the aluminum processing industry around the world, achieve sustainable development and contribute to the development of society.

Description: Alloy: 1.3.5.6.8series(1100, 1060, 1050, 1050A, 3003, 3A21, 5005, 5052, 5083, 5754, 6061, 6063, 8011) 2. Temper: H18. H24. H32. H112. O. F 6xxx: T4, T6, H24, H32, O 3. Thickness: 0.2-180MM 4 Width: Up to 1500mm 5 Length: Up to 6000mm

Aluminum Sheets Plate Specifications of Aluminum Sheet : 1.Aluminum Sheet and Plate & Panel. 2.without oxidation and scratch. 3.Thickness:0.15mm-200mm 4.long-term of cooperation 5.the quality of the malitary level

Production of aluminum foil is widely used in lighting, interior decoration, furniture, kitchen, household electrical appliance panel, casings of electronic products, automotive and outside decoration, solar heat reflective material, signs, bags, jewelry boxes, aerospace, instrumentation, chemical, construction, packaging, such as air-conditioning industry. Thick0.005- 200mm wide10-2200mm

Aluminum sheet as below: Alloy: 1050, 1060, 1070, 1100, 1200, 1035, 2024, 2a12, 2014, 2a14, 3003, 3004, 5052, 5a02, 5154, 5a03, 5456, 5a05, 5005, 5083, 5086, 5754, 6061, 6063, 6082 Temper: o, h14, h24, h18, h26, h22, t4, t6, t651 Thickness: from 0.2mm to 10mm Width: up to 1600mm Length: up to 6000mm Packing: Wooden/veneer case, wooden/veneer pallet Model: Baodi Unit price/payment: As negotiated Hs code: 7606 Trademark: Baodi Origin: China Min. Order: 2 tons Transportation: Within 30days Wooden pallet

Our company is mainly engaged in processing and sales of aluminum, we have one 2050mm and one 1250mm kaiping machine, one 1250mm slitting shear line, one 650mm slitting shear line, one 2100mm, one 1450mm and one 650mm tenso-shear line, five 1300mm and one 1250mm shearing lines, and two set of film laminating. Because of the above machine our production ability will be about 7000 tons every month. Our main products include 1xxx series, 3xxx series, 5xxx series, 6xxx series and 8 xxx series aluminum sheets, aluminum plates, aluminum coils, aluminum strips, aluminum foil and so on, thickness vary from 0.1mm to 20mm. Our main market is Canada, Ukraine, Russia, Cuba, Bosnia, Thailand, Vietnam, Korea, Egypt and worldwide. Our company has passed international quality management system ISO9001:2008 and International Environmental Management System ISO14001:2004. All of our products meet GB/T 3880-2006 quality standard and have past SGS test, you can be result assured of the quality. Our main products are8011,1050,1060,1070,1100,3003, 3004,3005,3105,5052,5005, 5754, 5083, 6061. Temper:O-H112. The thickness of our products varies from 0.1mm-6mm. For aluminum coil the width is from 10mm -1250mm. For aluminum sheet the width is from 50mm-1250mm. Other size will made based on customer's requirement. Packing: Waterproof paper cover the surface,wood pallet. 1*20ft container can load 16-20 tons aluminum sheet. (1) Standard seaworthy export packing, wooden pallets with plastic protection film for coils; (2) The packing for the coil: eye to sky or eye to wall based on the client's requirement; (3) Usually one 20 feet container can load about 16-20MT. Packing: Waterproof paper cover the surface,wood pallet. 1*20ft container can load 16-20 tons aluminum sheet. (1) Standard seaworthy export packing, wooden pallets with plastic protection film for coils; (2) The packing for the coil: eye to sky or eye to wall based on the client's requirement; (3) Usually one 20 feet container can load about 16-20MT.

5182 aluminum sheet is the main alloy used for tank car, and high quality 5182 aluminum sheet is insurance for the safety of transportation. At present, the tank car in domestic usually adopt 5182 aluminum sheet with length within 12.5 m, width within 2.2 m, and the thickness are usually 5 mm, 6 mm, as well as 8 mm. A complete tank body needs 4 to 6 pieces 5182 aluminum sheet. Whats more, the most important tank body adopts 5182-h111 aluminum sheet, and the tank lid on both sides adopts 5182-o aluminum sheet. Packaging & shipping 1. Standard seaworthy export packing, wooden pallets with plastics protection for the sheet/plate; 2. 15-20mt can be loaded into 20container and 21-24mt is more suitable in 40container; 3. The other packing can be made based on the customer requirement. Strength of mingai al. (1) a listed company with high reputation. (2) about 20 years developmental history, skilled workers. (3) enough raw material supplying, fast delivery guarantee. (4) dc product, we can reach en, jis, astm standard. (5) obtain many strict quality certifications, sgs, dnv gl, ccs etc. (6) reasonable price, good quality. Faq Q1: can you supply the sampledoes it free or not A1:for partial materials, we can supply the sample free(without the freight charge). Q2:whats the terms of payment A2:we can accept 100% irrevocable lc at sight, deposit 30% t/t, etc. Q3: what kinds of alloy can you suppl A3: 1xxx-8xxxx series

Alloy: 1050, 1060 1061 1070 1100 1200 3003 3004 3105 5005 5011 5052 5083 5086 5754 5a03 5a06 6063 8011 Temper: o, h12, h14, h16, h18, h24.....H112 etc. Specification: thickness cold rolling/hot rolling: 0.09-500mm widthcold rolling/hot rolling:200--lengthcold rolling/hot rolling 500--10000mm Surface: mill finished Thickness cold rolling/hot rolling: 0.09-500mm widthcold rolling/hot rolling:200--lengthcold rolling/hot rolling 500--10000mm

What Is 2024 Aluminum Sheet 2024 aluminum plate, a typical hard aluminum, belongs to the aluminum-copper-magnesium aluminum alloy. It is of well-matched composition and excellent comprehensive performance. It is widely used in aircraft structures, rivets, truck hubs, propeller components and other structural components. 7075 aluminum plate is another choice. Properties of 2024 Aluminum Sheet/Plate The tensile strength of the alloy plate is 400-500MPa, and the heat resistance and fatigue resistance of the alloy are better than that of the alloy. It is of high strength and good hear resistance, which can be used as working parts below 150â??. The strength of 2024 aluminum alloy is better than 7075 plate when the temperature is over 125. Its properties are all better in the hot state, annealing and quenching conditions. Heat treatment strengthening effect is obvious. It is of poor corrosion resistance, but it can be effectively protected by coating with pure aluminum It is easy to crack when welding, but it can be welded by special process or riveted.

Description: Properties of Aluminum tread plates Aluminum tread plates ccording to the different classification of aluminum sheet alloy 1, the general tread aluminum alloy plate: 1060 aluminum plate for the plate from the processing of aluminum alloy pattern plate, able to adapt to the normal environment, low prices. Usually cold storage, flooring, packaging and more use of this pattern aluminum sheet. 2,Al-Mn alloy tread plate: 3003 as the main raw material processing, the aluminum plate, also known as rust-proof aluminum, the strength is slightly higher than the ordinary aluminum alloy pattern plate, with a certain anti-rust properties, but the hardness and corrosion resistance Less than 5,000 series of pattern plate, so the product is not strictly used in the anti-rust, such as truck models, cold storage floor. 3, aluminum-magnesium alloy tread plate: 5052 or 5083, such as 5000 series of aluminum as raw material processing, with good corrosion resistance, hardness, anti-rust performance. Usually used in special places, such as ships, cars lights, humid environment, the high hardness of aluminum, a certain load-bearing capacity. In accordance with the different patterns of aluminum plate classification: pattern plate has a bar, two bars, three bars and five bars.