Cenospheres (aluminosilicate microspheres) are hollow aluminosilicate glass ceramic beads ranging in size from 400-500 microns 20-50mkm (most often from 100 to 250 microns), which are formed during high-temperature combustion of pulverized coal. The chemical composition of the main component of the cenospheres is silicon oxide SiO2 (45-60%), aluminium oxide Al2O3 (15-40%), iron oxide Fe2O3 (1.0-10%), calcium oxide CaO (1.5- 4.5%), potassium oxide K2O (2.0-4.5%) and other certain oxides that make up the balance of the content are typically less than 1.0%. Due to the unique set of physical and chemical characteristics of the cenospheres, they are used in the manufacturing of various composite materials. They are used in solving technical issues that require: reduction in the weight material with a low thermal conductivity, high strength, volume efficiency, increased resistance to erosion and aggressive environments.
Oil and gas industry: Accelerating the process and improving the efficiency of well drilling; increasing the life of drilling equipment; drilling fluids and plug cements of low density and high strength. Construction: ultralight and ultra-lightweight concrete; high-strength and low-density thermal and acoustic insulation boards; increased adhesion of concrete or brick walls, excellent leveler. dry mortars, lime and liquid mortars, cements, plaster, insulating roof coatings and soundproofing materials - lightweight, smooth surface, low cost, heat resistant, shrinkage resistant. sensitizer for the use of emulsion BBs. paints - resistance to chemical corrosion and light, thermal insulation, smoothness. Styrofoam: Aircraft, spacecraft, ship construction - low density and moisture absorption, high mechanical properties of materials for vibration damping, insulation and thermal protection. Ceramics: Refractory materials and coatings, insulation materials. Plastics Epoxy resins: production of polyethylene - improving strength and abrasion resistance. production of bearings, cameras, furniture and its accessories - tensile strength, impact strength, hardness, resistance to heat and light. Profiled materials, pipes, plates - dimensional stability, rigidity, heat resistance; TV housings, auto parts - compressive strength, bending elasticity, shrinkage reduction.
Microsphere aluminosilicate / cenosphere SiO2. 58.4% Al2O3. 36.5% Fe2O3 1.8% Density 0.8% Moisture 0.1% Colour Grey Form sphere Bulk density 400kg/m3 Annual quantity 3000 MT
We can supply Energy coal from different origin in large volumes. Different quality, no lignite. Please submit inquiry with required parameters.
Aluminosilicate microspheres.Trading
Bauxite is a naturally occurring mineral comprising mainly of aluminium hydroxides (the trihydrate Gibbsite Al(OH)3and the AlOOH monohydrate polymorphs boehmite and diaspore), with other components in the mineral typically being silica, iron oxide, titania and aluminosilicates (clay etc). It’s a rock from Laterite soil and it is a primary Ore of Aluminium. Properties of Bauxite include low iron content; a high Polished Stone Value (PSV) for high friction surfacing applications; a high melting point and density. APPLICATIONS Gunning materials High friction surfacing Minerals for abrasion Refractory castables Mouldable and Ramming Mixes Refractory mineral blends CEMENTATION believes in supplying quality bauxite with consistency to its customers across the world, according to their needs.
SiO2 - 56.15%; AL2O3 - 35.42%; +400 um - 0,7% +250 um - 12,5% +200 um - 9,7% +160 um - 28% +100 um - 34% -100 um - 15,1%
Kyanite is a typically blue aluminosilicate mineral, found in aluminium-rich metamorphic pegmatites and sedimentary rock. Kyanite is also known as disthene or cyanite. Applications â?? Ceramic Refractory industry Foundry (Casting at high temperatures)
Product name: Iodized Salt Origin: Egypt Salt Source: sea salt HS Code: 250100 Color and Form: White Crystalline Refined Fine Salt Packing: 25 Kg Sacks - Jumbo Bag 1 Ton Molecular Formula: NaCl Purity: 98.50% min. As EIC for export, world-class salt exporter, we will walk through the questions, what is non iodized and what is iodized salt and everything you need to know about iodized and non-iodized salts, in this article. Before giving a non iodized salt definition, let's fully understand what iodized salt is. Iodized salt is basically salt to which iodine is added. Iodine is a trace mineral found in trace amounts in some foods like eggs, vegetables, and seafood. The body needs iodine however, it cannot make iodine naturally. That is why humans need to take iodine from foods. Since iodine is found in minimal quantities in foods, it is also added to table salt in many countries to prevent iodine deficiency. Both iodized salt and non-iodized salt look the same, taste the same, and feel the same. Then, what is non iodized salt? Non-iodized salt is salt without the addition of iodine. It consists of sodium and chloride. Still, table salt is processed after being harvested. During this process, some additives and anti-caking agents such as sodium aluminosilicate, silicon dioxide, and magnesium carbonate can be added to the table salt. So, even if iodine is not added to it, other agents that enhance the taste and elongate shelf life might be included in the production. TO KNOW MORE ABOUT IT CONTACT US NOW (24/7)
Product name: NON-Iodised Salt HS Code: 250100 Origin: Egypt Salt source: Sea salt Color and Form: White Crystalline Refined Fine Salt Packing: 25 Kg Sacks - Jumbo Bag 1 Ton Molecular Formula: NaCl Purity: 98.50% min. What Is Non Iodized Salt? Is It Better For You? When you check out the shelves to buy table salt, there are two primary options. To buy iodized salt or to buy non-iodized salt, that is the question. Both non-iodized salt and regular salt are essential for their nutritional benefits and savory seasoning foods to enhance the flavor. There are many claims of one being better than the other, but the issue here is to know the difference between salt and iodized salt and which one is better for you. As EIC for export, world-class salt exporter, we will walk through the questions, what is non iodized and what is iodized salt and everything you need to know about iodized and non-iodized salts, in this article. Before giving a non iodized salt definition, let's fully understand what iodized salt is. Iodized salt is basically salt to which iodine is added. Iodine is a trace mineral found in trace amounts in some foods like eggs, vegetables, and seafood. The body needs iodine however, it cannot make iodine naturally. That is why humans need to take iodine from foods. Since iodine is found in minimal quantities in foods, it is also added to table salt in many countries to prevent iodine deficiency. Both iodized salt and non-iodized salt look the same, taste the same, and feel the same. Then, what is non iodized salt? Non-iodized salt is salt without the addition of iodine. It consists of sodium and chloride. Still, table salt is processed after being harvested. During this process, some additives and anti-caking agents such as sodium aluminosilicate, silicon dioxide, and magnesium carbonate can be added to the table salt. So, even if iodine is not added to it, other agents that enhance the taste and elongate shelf life might be included in the production. TO KNOW MORE ABOUT IT CONTACT US NOW (24/7)
Zeoli is a magical aluminosilicate mineral and contains potassium, calcium and sodium as exchangeable elements. There are different types of zeolites, among which clinoptilolite zeolite can be used as a molecular sieve in the agricultural industry due to its ion exchange and porous structure.
Bauxite is a naturally occurring, heterogeneous material composed primarily of one or more aluminum hydroxide minerals, plus various mixtures of silica, iron oxide, titania, aluminosilicate, and other impurities in minor or trace amounts. Bauxites are typically classified according to their intended commercial application:� � abrasive, cement, chemical, metallurgical, refractory, etc. The bulk of world bauxite production (approximately 85%) is used as feed for the manufacture of alumina via a wet chemical caustic leach method commonly known as the Bayer process. MOQ 5,000MT Supplied from Africa or India
Aluminosilicate Glass refers to glass that has aluminum oxide in its composition. It is crystal clear and has good chemical stability, electrical insulation, mechanical strength and low thermal expansion coefficient. It is widely used for manufacturing gauge glass and sight glass. No surface defects Great chemical resistance Allowing for high operating temperature of up to 600 C Hydrolytic resistance Acid & alkali resistance A full range of sizes Special discounts for large orders and various promotion campaigns Specification Color: colorless or slightly yellow Shape: circular, rectangular Density: 2.62 2.67 g/cm3 Transmissivity: 91.8% Refractive index: 1.5325 (yellow) Shock temperature: 370 C Softening temperature: 920 C Bending strength: 180 220 MPa
Sugar ICUMSA 45. White Crystal High-Grade Refined ICUMSA 45 Sugar WHITE CANE SUGAR ICUMSA 45. Brazilina Sugar ICUMSA 45 SPECIFICATION: Brazilian Sugar ICUMSA 45 colour of the solution: 45 icumsa units max radiation: within internationally accepted limits moisture content: 0.06% max invert sugar content: 0.04% max conductivity ash: 0.04% max sulphur dioxide: 15 mg/kg max anti-caking agents: maximum level of 1.5 m/m singly or combination of following agents: -calcium phosphate, tribasic magnesium carbonate silicon dioxide, amorphous (dehydrated silica gel) calcium silicate magnesium trisilicate sodium aluminosilicate calcium aluminosilicate polarization: 99.7% min moisture content: 0.06% max invert sugar content: 0.04% max conductivity ash: 0.04% max total bacteria: 60 max e. coli: 30 max mould: 25 max sulphur dioxide (sosub2): 15 max arsenic (as): 0.5 max lead (pb): 0.5 max Brazilians Sugar ICUMSA 45
Brazilian Brown Sugar ICUMSA 45 SPECIFICATION: Brazilian Sugar ICUMSA 45 colour of the solution: 45 icumsa units max radiation: within internationally accepted limits moisture content: 0.06% max invert sugar content: 0.04% max conductivity ash: 0.04% max sulphur dioxide: 15 mg/kg max anti-caking agents: maximum level of 1.5 m/m singly or combination of following agents: -calcium phosphate, tribasic â?? magnesium carbonate â?? silicon dioxide, amorphous (dehydrated silica gel) â?? calcium silicate â?? magnesium trisilicate â?? sodium aluminosilicate â?? calcium aluminosilicate polarization: 99.7% min moisture content: 0.06% max invert sugar content: 0.04% max conductivity ash: 0.04% max total bacteria: 60 max e. coli: 30 max
We are the leading Supplier of Brazilian Refined White Cane Sugar Icumsa 45 sugar. We sell worldwide to all interested buyers at very low prices and we offer prompt delivery to your well destination. Solution color: 45 icumsa units max Radiation: within internationally accepted limits Moisture content: 0.06% max Invert sugar content: 0.04% max Ash conductivity: 0.04% max Sulfur dioxide: 15 mg / kg max Anti-caking agents: maximum content of 1.5 m / m individually or combination of the following agents: -Tribasic calcium phosphate -Magnesium carbonate - Amorphous silicon dioxide (dehydrated silica gel) -Calcium silicate -Magnesium trisilicate -Aluminosilicate sodium -Aluminosilicate calcium Polarization: 99.7% min Moisture content: 0.06% max Invert sugar content: 0.04% max Ash conductivity: 0.04% max Total bacteria: 60 max E. coli: 30 max Mold: 25 max Sulfur dioxide (sosub2): 15 max Arsenic (as): 0.5 max Lead (bp): 0.5 max Polarization: 99.80 Degrees min -Ash Content : 0.08 Max. -Icumsa: 45 -Substance: Solid Crystal -Origin: Thailand -Year of product: Current Product Name : High quality White Sugar, Brown Sugar, Icumsa 45 Raw sugar. Type : ICUMSA Color:Sparkling White Crystal Harvest : Last Consumption : Suitable for Human Consumption Polarization : 99.80% Mainimum : Humidity : 00.04% Maximum Suphateash Content ; 00.04% Maximum Granulation : Fine Odour
Sodium Feldspar Powder , export quality with 60+ whiteness. below are the specification. Potassium Oxide K20 0.70% Sodium Oxide Na2O 9.50% Whiteness Whiteness 74 L*Value L*Value 80.9 A*Value A*Value 0.9 B* Value B* Value 3.1 Product Details Application : Industrial Color : White Form : Powder Packaging Type : BOPP Bags, Plastic Bags Packaging Size : 25 Kg, 50 Kg Moq : 15-20 Metric Ton Preferred Buyer From Location : Worldwide We areSoda Feldspar Powder Exporter and you can avail it easily from us. We are Soda Feldspar Powder Supplier and the most common product in our portfolio is feldspar. We are well-known Soda Feldspar Powder Exporters in Jaipur. We guarantee that the feldspar we sell meets or exceeds market standards. Feldspar may be found in many sorts of rocks, including quartz, gneiss, basalt, and other crystallized stones, and is an important component of most granites. Shree Charbhuja Exim is both a Soda Feldspar Powder Manufacturer and Soda Feldspar Powder Supplier India. Feldspar is found all over the world and is mined in practically every country. Aluminosilicates are feldspars. We are Soda Feldspar Powder Dealer and our Soda Feldspar Powder are a necessary raw material with various industrial uses due to their fusibility and clarity.
Physical & Chemical Properities "1. Cost reduction; 2. Weight reduction; 3. Non-combustible; 4. Thermal insulation; 5. Sound absorption; 6. Good Fluidity; 7. High thermal stability; 8. Low density; 9. High particle strength 10. Low water absorption 11. Stable property " Application 1. Spherical particle, surface vitrified, good fluidity while mixing, good workability, mixed evenly shortly, then reduce the aggregate broke when dry-wet mixing, good thermal property and mechanical property. 2. Can be used in a wide variety of paint and coating systems to reduce VOCs, improve flow and leveling characteristics, and enhance chemical and wear resistance properties. 3. Low water absorption, easily controlled in mortar, low shrinkage, no hollowing and cracking, stable thermal property and mechanical property, increase the mortar service life. 4. Can used in boards and panels for both commercial and residential interiors.The boards are comfortable to handle and easy to cut and fasten like wood.
Physical & Chemical Properities "1. Cost reduction; 2. Weight reduction; 3. Non-combustible; 4. Thermal insulation; 5. Sound absorption; 6. Good Fluidity; 7. High thermal stability; 8. Low density; 9. High particle strength 10. Low water absorption 11. Stable property " Application 1. Spherical particle, surface vitrified, good fluidity while mixing, good workability, mixed evenly shortly, then reduce the aggregate broke when dry-wet mixing, good thermal property and mechanical property. 2. Can be used in a wide variety of paint and coating systems to reduce VOCs, improve flow and leveling characteristics, and enhance chemical and wear resistance properties. 3. Low water absorption, easily controlled in mortar, low shrinkage, no hollowing and cracking, stable thermal property and mechanical property, increase the mortar service life. 4. Can used in boards and panels for both commercial and residential interiors.The boards are comfortable to handle and easy to cut and fasten like wood.
Grade: S40W/D, S60W/D, S80W/D The solid content of wet type marked with W is about 15%. Product Description: Expanded microsphere is a kind of hollow spherical plastic particles. The products can be use as light fillers because of low density. It made by expandable microsphere with Sinnos proprietary technology. Application: Leather repair, automotive repair of atomic dust, unsaturated polyester, epoxy casting and printing ink.
