(1)Grade:G100(Grade C)
(2)Size:10,14,18,22,26,30,34,38,42,48mm
(3)Material:Steel
(4)Function:Conveyor
(5)Surface:Painted
(6)Package:Drum on Pallet,Wooden Case
(7)Our Main Products:
US Standard:NACM90,NACM96,ASTM80 Standard G30,G43,G70
Germany Standard:DIN763,DIN764,DIN766,DIN5685A/C Chain
British Standard Short/Medium/Long Link Chain
EN818-2 G80 Chain
Special Use: Cold Heading Steel
Wire Gauge: 1.8mm-5.5mm
Application: Construction
Alloy Or Not: Is Alloy
Type: Galvanized
Place of Origin: India and China
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase.
The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance.
The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion.
Product name
ALLOY 20 STAINLESS STEEL
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Galvanized GI Steel Rolls & Plates & Coils
Whatâ??s the difference between galvanized GI steel coils and plates?
I. Definition
Galvanized GI Steel coil and galvanized sheet are galvanized steel. The galvanized coil is a continuous hot dip galvanized coil in the production process. While galvanized sheet is a single hot dip galvanized sheet in the production process.
2. the production process
The production process of galvanized coil and galvanized sheet is different.
The production process of galvanized coil generally includes multiple processes such as coil heating, hot dip galvanizing and shearing into coil.
The galvanized sheet is generally the zinc alloy coating through the hot dip technology directly coated to the surface of the steel plate.
So the production process is relatively simple, the process difficulty is relatively low.
3. material thickness
The material thickness of galvanized coil and galvanized sheet is also slightly different.
Generally speaking, the thickness of galvanized coil is relatively thin. We mainly use it for the production of cold rolled, coating and other thin steel products.
The thickness of galvanized sheet is relatively thick. We mainly use it in the manufacture of glass fiber reinforced plastic, automotive panels, roof panels and other steel products requiring strength and corrosion resistance.
4. Advantages and Disadvantages
Both galvanized coil and galvanized sheet have their own advantages and disadvantages.
The production cycle of galvanized coil is short, the process is simple, and it is suitable for the production of low thickness and high precision steel products.
The galvanized sheet has the advantage of hardness, corrosion resistance, wear resistance and other multiple properties.
However, the production process of galvanized sheet is time-consuming and laborious, and the production cost is relatively high.
5. Application fields
The application areas of galvanized coil and galvanized sheet are also different.
Galvanized coil is usually used in the production of home appliances, building materials, auto parts, pipes and other high-demand steel products.
The galvanized sheet is mainly used in automobile manufacturing, construction engineering, petroleum, chemical and other industries.
In addition, because of the good corrosion resistance of galvanized sheet, it is also widely used in Marine engineering, railway, bridge and other fields.
20879 Alloy Steel Mining Chain For Conveyor Suppliers
Short on time? Let Alloy Steel Mining Chain For Conveyor sellers contact you.
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
65Mn CK67 high carbon cold rolled spring steel strip
Hardened and Tempered Steel Strip
Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties
Standard AISI, ASTM, BS, DIN, GB, JIS
Place of Origin China
Material Hot Rolled
Surface Polished
Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade
Brand Name HENSON
Width 2.0mm-300.0mm
Length Customize
Tolerance +/-10%
Hardness 40-55HRC
Surface nature, blue, yellow, white, polish
Edge Slit,Round,Square
MOQ 1000KGS
Tolerance thickness+/-0.01mm max,width +/-0.05mm max
Type strip,coil,sheet
Coil ID 300-500 mm
Tensile Strength 540-1575N/mm2
Yield Strength 370-1475N/mm2
The mine sprocket assembly 23Z1702 is the driving part of the coal mine scraper conveyor. It is located at the tail of the 764 scraper, which drives the scraper chain to operate in the central trough of the scraper for conveying coal. Today we will work together with Henan Shuangzhi machinery to understand the mine sprocket assembly 23Z1702.
Mineral sprocket assembly 23Z1702 has high strength, strong wear resistance, can withstand impact load, and has a certain toughness; Mine sprocket assembly 23Z1702 tooth size parameters design accurate, high processing precision, so that can ensure the chain socket and chain mesh well, reduce the chain jump, chain clip phenomenon.
When installing the mineral sprocket assembly 23Z1702, the two bearing pedestals are respectively placed on the left and right side plates of the tailstock, and the sprocket assembly is fixed on the tailstock through the locating pin, which is convenient and fast to install. At the same time of installation, clean the rust-proof layer of the spline at shaft end of the mine sprocket assembly 23Z1702, scrub clean and apply butter. After the assembly of the mineral sprocket assembly 23Z1702 and the tail frame, industrial gear oil is injected into the oil tank through the sprocket assembly oil filling hole to ensure the normal operation and lubrication of the sprocket assembly 23Z1702.
There are two kinds of sprocket assembly structure: split type and integral type. The mine sprocket assembly 23Z1702 is a split sprocket assembly, its structural features are: when the sprocket teeth wear can only replace the sprocket body or not the whole replacement, so that the maintenance cost can be saved to a certain extent.
Mine sprocket assembly 23Z1702 is just one of many sprocket assembly scraper, as a transmission component, its wear replacement is also relatively common. And Henan Shuangzhi Machinery as a plate scraper accessories manufacturers, has been committed to the production and processing of sprocket components, improve sprocket wear resistance, extend the use cycle is what we have been doing, also welcome new and old customers to consult exchanges, hope to help you.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
Special Use: Cold Heading Steel
Wire Gauge: 0.15mm to 16.00mm
Application: Fencing
Alloy Or Not: Non-alloy
Type: Spring
Steel Grade: SAE1010 SAE1045 SAE1060 65Mn 72A 82B
Origin : India and China
Wire Gauge: single steel diameter size 1.4-4.8mm
Standard: AISI,ASTM,BS,GB,JIS
Alloy Or Not: Non-alloy
Type: Galvanized
Place of Origin: India and China
Wire Gauge: 0.20mm-12.50mm
Standard: AISI,ASTM,BS,DIN,GB,JIS
Application: Construction
Alloy Or Not: Non-alloy
Steel Grade: 30MnSi, SAE1060, SAE1065, 65Mn, SAE1070, 72A B,SAE1080,82A/B,C82DA
Place of Origin: India and China
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
S003-0102 sprocket assembly plays an extremely important role in the whole scraper conveyer. Its performance directly affects the production efficiency, product quality and service life of the scraper conveyer.
S003-0102 sprocket assembly is mainly composed of bearing cover, bearing housing, roller, sprocket, shaft, floating seal, roller bearing and so on. Power output by the reducer, through the sprocket shaft to the sprocket spline, so that the sprocket drive scraper operation. The s003-0102 sprocket assembly is lubricated by thin oil, sealed by mechanical float, and lubricated by long distance. The s003-0102 sprocket assembly can be disassembled as a whole for easy maintenance without disassembling the transmission.
7S003-0102 sprocket components in the installation and use of daily maintenance, take preventive measures in advance, to extend the service life. If you need sprocket assembly, you are welcome to contact us in time.
20879 Alloy Steel Mining Chain For Conveyor Suppliers
Short on time? Let Alloy Steel Mining Chain For Conveyor sellers contact you.
