Loctite is well known brand name for Adhesives and sealant. Loctite has thousands of products for different Industrial application as per client request. It comes in 20 GM, 50 ML, 100 GM, 250 ML tubes.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Supplying business of construction chemicals like Tile Adhesive and Epoxy tile grout
Tile adhesives Bs:5980:1980 standards tested products Packing available in 20 kg and 50 kg
CAD NO 61901-98-7
Self adhesive sticker Technical details: Output/hour : up to 7200 containers. for round bottle only. (depending on the size of the container or the label length) Electrical rating : 0.25 hp/1400 rpm motor for conveyor drive. 0.25 hp/1400 rpm motor for pressing device drive. 6v dc stepper motor. Power characteristics : 230 volts ac 50 hz. Construction : top stainless steel matt finish, covered with s.S. 304 sheet. Over all dimensions : 1835 mm (l) 600 mm (w) 1250 mm (h). (approx) Conveyor height : 800 mm +50 mm. In put specification : a) round container diameter : 25 mm to 80 mm. Label roll diameter : max. 300 mm. Sea worthy wooden box packing 1500mm x 1500mm x 2000mm
Supplying business of construction chemicals like Tile Adhesive and Epoxy tile grout
Super bond high performance epoxy adhesives for fixing marble, grenite, machinery & multi purpose usages. Fastest cureing & super strength is a additional benifit. 1kgs, 1.8kgd, 5kgs, 20kgs.
Dubound's Power is a single component white adhesive. That is functional for high resistance laying of ceramic tiles, glass mosaics and homogeneous tiles. The tacking polymers deformability (Superior Spreadability) and fine finishing of the material affixed.
Dubond's Pinnacle is a hi-tech single part adhesive with superior levels of adhesion and deformability. it is a high performance dry set adhesive for use with water or latex for installing ceramic tiles, marble ,stone, any kind of non porous or vitreous tiles or synthetic stone. use with tuffex ad for high performance for interior and exterior laying and over laying of sites. It has a special function that works specifically to counter conditions such as external pressures on cladding tiles of the skyscrapers and large format tiles with overlaying on existing floors. it is a secure professional method of laying for it has high deformability up to 10 mm thickness.
Dubond's pure is a quartz based tile adhesive, that has excellent results for high resistance laying of ceramic tiles on floor, walls on cement based substrates. It is workable up to 10 mm thickness and the formulation ensures optimum-performance for tile setters. It is absolutely reliable and has its base in superiority of its conception.
MTC- Its Micro Lubrication Technology,which creates artificial brand new layer between friction. Due to MTC its smooth the friction and hence saves damage of machine,vehicle engine, as a result it enhance machine life by 300% to 500%. No further Wear and Tear of machine . Productivity will increase By use of this product due to overload no damage or load bearing capacity of machine/vehicle will increase. vehicle/Machine maintenance will be less by 50%. Saving of Fuel/electricity. Many Reasons to use this product. For detail call - 475 Ml ,4 Ltr.
Product Details: Product Type Laminated Sheet Material Wood Surface Finishing Matte Application Furniture Decoration Color Brown Any Color Product Description Owing to our extensive years of industry experience and market understanding, we are engaged in manufacturing and exporting a wide gamut of Nayna Teak Laminated Sheet. It is made by using best grade seasoned wood that is laminated by applying heat or pressure and some time with the help of adhesives as per clients diverse demands. Apart from this, the offered Nayna Teak Laminated Sheet can be purchased from us at rock bottom prices.
Natural gum Best performance cmt with 8% viscosity 42000+/- 2000 cps at 25 deg cent. 25 kg hdpe laminated brown paper bags with one inside and one outside pe liner
Mosaic Size mm 20 x 20 x 4 sheet size =327 x 327MM 1 sheet Coverage =0.1068 1 Ctns Content = 2.14SQM 1 Ctns Content = 20 sheets 1 Ctns Weight = 13.73 kg
Mosaic Size mm 25 x 25 x 4, 50 x 50 x 4, 25 x 50 x 4 sheet size =316 x 316MM 1 sheet Coverage = 0.0998 1 Ctns Content = 2.00 SQM 1 Ctns Content= 20 sheets 1 Ctns Weight = 19.00 kg
Mosaic Size mm 20 x 20 x 4 sheet size =327 x 327MM 1 sheet Coverage =0.1068 1 Ctns Content = 2.14SQM 1 Ctns Content = 20 sheets 1 Ctns Weight = 13.73 kg
NC Putty: Very quick drying putty has excellent filling & sanding property with extreem adhesion. Ideal for wood and metal surface. NC Primer: Fast drying high quality NC PS GREY & WHITE has good adhesion and hardness. Used as surface on vehicles and industrial products. NC Paints:Nitrocellulose paints has excellent properties like quick drying, good gloss, hardness, adhesion and durability. Ideal for automobile refinish and wooden furniture. NC Alluminium & Sparkle: Single pack fast drying sparkle effet paints. Cost effective. Ideal for eletric pole, other industrial products and as well as wooden furniture.
Fly ash is a finely divided residue made from the combustion of pulverized coal that can be used to increase concrete durability and workability, while reducing permeability. fly ash has a wide variety of applications and uses, though it is primarily known for improving the durability and workability of concrete mixes. Fly ash is also a filler in paints, adhesives, and metal and plastic composites. It's commonly used as structural fill for road construction and fly ash can be used to make bricks, ceramic tiles, plaster, Portland cement, and ready-mix cement.
