Acid Purification System Suppliers and Manufacturers

1. Designed for the purification of laboratory hydrochloric acid, nitric acid, and hydrofluoric acid to reduce the content of metal impurities in the acid. 2. Generally, for an acid with a metal impurity content of 10 ppb, after one purification, the metal impurity content can be reduced to about 0.01 ppb. 3. Meet the extremely low detection limit requirements of ICP-MS and provide laboratory-grade ultrapure acid for demanding analytical applications.

Product Features: 1. PFA material (translucent) 2. High and low temperature resistance: -200C to 260C 3. Strong acid and alkali resistance, high temperature resistance 4. No dissolution and precipitation, no contamination of samples 5. The principle of sub-boiling distillation and heat radiation. 6. Innovative advantages: Timed and segmented temperature control, annular heating jacket, liquid level gauge, pagoda-shaped condensation chamber Product Specifications: 500ml/1/2/4/5/6L

Used for the preparation of ultrapure acids in trace analysis, it can meet the low detection limit requirements of ICP-OES and ICP-MS and provide laboratory-grade ultrapure acids for demanding analytical applications, such as HNO3, HCL, HF and other commonly used laboratories. acid. #aciddistillation #ultrahighpurityacid #subboiling #acidpurification

Acid purification instrument: also known as acid purification system, high purity acid purifier, acid reagent purifier, high purity acid distillation purifier, etc., often due to the poor purity of acid in laboratory work, resulting in the deviation and error of analysis results. Commercially available ultra-pure acids are often very expensive and it is difficult to meet the large demand for acid in daily analysis. Therefore, purification and optimization of acid quality is the most economically feasible way. Our factory's acid purifier can be used in laboratories such as the purification of HNO3, HCl, HF, alkali solution and organic solvent. The purified acid is as good as that of Merck. acid purifier is to use the principle of thermal radiation, keep the liquid temperature below the boiling point temperature evaporation, and then condense the acid vapor to prepare high purity water and high purity reagents, widely used in sample processing and analysis experiments. Product Features: 1. It can meet the very low detection limit requirements of ICP and ICP-MS and provide laborator-grade ultra-pure acid for harsh analytical applications. The containers used are all made of Teflon corrosion-resistant non-adsorption plastics, which can deal with common laboratory acids such as HNO3, HCl and HF. 2. The experiment proves that the metal impurity content of about 10ppb acid can be reduced to about 0.01ppb after one distillation. If more acid is required, the number of purification can be increased.

Reagent contamination can elevate the background concentration of analytes in a sample, making it essential for laboratories to invest in high-purity acids for trace metal analyses. With limited sample sizes, maintaining low blank levels is crucial for reproducibility. NJbinglabâ??s SCH sub-boiling distillation systems enable laboratories to produce their own high-purity acids at significantly reduced costs. The chemical reagents utilized during analysis are a major contributor to analytical blanks. Sub-boiling distillation is recognized as the most effective method for acid purification. This technique employs Wrap-around silicone heating jacket to vaporize the surface liquid at a temperature typically 20 �°C below the boiling point. In conventional distillation, the boiling process generates aerosolized particles, leading to contamination in the distillate. In contrast, the gentle surface evaporation used in sub-boiling distillation minimizes spray or droplet formation, resulting in high-purity acids. Advantages: 1. Utilizes the same technology as commercial production for ultra-trace metals analysis. 2. Achieves up to 90% cost savings on ultra-pure acids by purifying lower-cost reagent-grade acids. 3. Allows you to purify only the quantity you need, when you need it. 4. Produces up to 90 mL per hour (SCH-III).

PFA purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.

Systems with different specifications have different acid production rates: 1L acid production rate: 50ml/1h 2L acid production rate: 70ml/1h 4L acid production rate: 90ml/1h Our acid purification system is specially designed to reduce metal impurities in organic solutions. Generally, for an acid with a metal impurity content of 10 ppb, after one purification, the metal impurity content can be reduced to about 0.01 ppb. #ICPMS #acidpurification

PFA purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.

PFA acid purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.