Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that follows a T, L or Pi configuration. Their configuration can either be in waveguide, in surface mount or coaxial, and depending on their application, they can either be directional or bidirectional. Applications: Attenuators are generally used in radio, communication and transmission line applications to weaken a stronger signal. 50ohm DC-6GHz, 5W SMA Fixed Attenuator Technical Specifications:
Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that follows a T, L or Pi configuration. Their configuration can either be in waveguide, in surface mount or coaxial, and depending on their application, they can either be directional or bidirectional. Applications: Attenuators are generally used in radio, communication and transmission line applications to weaken a stronger signal. 50ohm DC-6GHz, 5W SMA Fixed Attenuator Technical Specifications: NORMINAL IMPENDANCE 50�© FREQUENCY RANGE DC to 6GHz (up to 26.5GHz optional) VSWR â?¤1.2 POWER RATING 5W TEMPERATURE RANGE -55�°C to +125�°C Dimensions: �?16.5*38 mm Attenuation 1,2,3,4,5,6,7,8,9,10,15,20,30dB available, and 1-9dB.�±0.6dB,10-30dB�±1dB 5W SMA Attenuator 6GHz 8GHz 12Ghz 18Ghz 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB 15dB 20dB 30dB 40dB 50dB 60dB 50ohm
Norminal impedance: 50 frequency range: . Dc to 6ghz Vswr: .1 20 maximum power rating: 2 watts average Temperature range: -55c to +125c intermodulation:-120dbc ( ) third-order Attenuation: 3, 6, 10, 15, 20, 30db available, and 1-10db 0.5db, 15-30db 1db. We can offer all power range 2w, 5w, 10w, 25w, 50w, 100w, 200w, 300w Carton packaging
Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that follows a T, L or Pi configuration. Their configuration can either be in waveguide, in surface mount or coaxial, and depending on their application, they can either be directional or bidirectional. Applications: Attenuators are generally used in radio, communication and transmission line applications to weaken a stronger signal. DC-18G,2W SMA Attenuator stainless steel PassivatedTechnical Specifications: NORMINAL IMPENDANCE 50�© FREQUENCY RANGE DC to 18GHz (up to 26.5Ghz optional) VSWR 6GHzâ?¤1.2 12.4GHzâ?¤1.3 18GHzâ?¤1.35 POWER RATING 2W TEMPERATURE RANGE -55�°C to +125�°C Dimensions: �?8*22 mm Attenuation 1,2,3,4,5,6,7,8,9,10,15,20,30dB available, and 1-10dB.�±0.8dB,15-30dB±1dB 2 Watt SMA Fixed Attenuator 18GHz stainless steel Passivated 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB 15dB 20dB 30dB 50ohm
We are pleased to furnish the following offer: A ) Brand : Baby Forumla Aptamil, Nutrilon, Friso, Hipp, Bebelac, Cerelec, Similac, Cow & Gate, SMA, S-26, Enfamil top aptamil milk powder Product : Milk Powder Packing : Can B) Specifications Fat - 1.5% max Moisture - 4/0% max Acidity - 17.5 T max Solubility - 0.2 max Disc - A-B Lactose - 51% min Protein - 34% min Standart plate count in 1 g - 50 000 max Coliforms - cells per 1 g - absent Salmonella - cells per 25 g - absent Radioactivity - 36 Bq/kg ma C) Sizes 24 tins x 400gms (Load ability in 20' FCL - 910 cartons / 40'FCL - 1800 cartons) 12 tins x 900gms (Load ability in 20' FCL - 900 cartons/ 40'FCL - 1750 cartons) 6 tins x 1800gms (Load ability in 20'FCL - 700 cartons / 40' FCL 1300 cartons) Packaging in 25kg bags loading 16 MT per container also available
Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. 5W SMA RF Termination, dummy load 6/8/10/12/18/26.5GHz 50ohm Norminal Impendance 50ohm Frequency range DC-6/10/12/18/26.5GHz VSWR 6GHzâ?¤1.2 18GHzâ?¤1.3 26.5GHzâ?¤1.35 Power rating 5W Temperature range -55 to 125 5W SMA Termination load RF dummy load 6GHz 8GHz 10GHz 12GHz 18GHz 26.5GHz 50ohm
Electrical Frequency Range DC to 6GHz Connector 1 Standard SMA Female Straight Connector 2 Standard U.FL Plating Goldplated RF Cable Type RF1.13/RF1.37/RG178 ect Cable length 100mm(According to customer customize) Impedance 50ohms VSWR 1.5:1 Rated Voltage AC 60V Contact Resistance 20m ohm max-signal and ground Withstand Voltage AC 200V Insulation Resistance 500M ohm minimum/DC 100V RoHs YES Temperature -40 to +85
. Frequency range: DC to 6 GHz DC to 12 GHz. . Rate Power: 2W . Attenuation: 1~40dB . Impedance : 50 ohms . Connector: SMA/N . SWR:
1 Description:WSS007 Dual Band Antenna with RP-SMA(M) 2 Model No.:WSS007 3 Antenna Profile:197 mm 4 Color:Black 5 Electrical Characteristic Operating Frequency:2.4~2.5GHz/ 5GHz/ Dual Band Antenna Type:Dipole Polarization Type:Linear Type of Radiation:Toroidal Peak Gain:2.0 dBi Typical Impedance:50 Ohm nominal VWSR:2.0:1 Max 6 Mechanical Characteristics Action:Swivel Type Lead Length:Customization Connector:RP-SMA(M) Core:N/A 7 Raw Material Coaxial Cable:RG-178 Housing:TPU Hinge:PC+ALLOY PE bag or Customization
1 Description WSS002 Dual Band Antenna with RP-SMA(M) 2 Model No.:WSS002 3 Antenna Profile:108.5 mm 4 Color:Black 5 Electrical Characteristic Operating Frequency:2.4~2.5GHz/ 5GHz/ Dual Band Antenna Type:Dipole Polarization Type:Linear Type of Radiation:Toroidal Peak Gain:2.0 dBi Typical Impedance:50 Ohm nominal VWSR:2.0:1 Max 6 Mechanical Characteristics Action:Swivel Type Lead Length:RP-SMA(M) Core:N/A 7 Raw Material Coaxial Cable:RG-178 Housing:TPU Hinge:PC+ALLOY PE bag or customization
Fearture: 1. Metal Ion doped fiber 2. High power light source durability 3. Attenuation level ranging from 1dB to 30dB with standard and premium tolerance 4. Compact design fits in existing connections or patch panels 5. Convenience and easy of handling Application: 1. Telecommunication Networks 2. CATV Networks 3. Data Communications Networks 4. Instrumentation 5. Local Area Networks
WCAVS-1 Wireless Camera Audio Video Scanner RF detector Intercept and View any Wireless Camera Video & Audio or RF signals 2.5 inch LCD to display sweep images. 45.2 x 27mm LCM frequency display and function setting. Frequency sweep Range 0.9~3GHz / 5~6GHz. Manual / Auto / Fixed sweep operation mode simple operation. Buzzer and vibration alert. Integrated 20MHz ~ 6GHz RF Detector function. Can be set 8 fixed of frequencies scan. 6 Sections threshold adjustment. 3000mA standard accessories replaceable lithium battery. Can display the sweep image is NTSC or PAL. Two kinds of frequency spectrum display mode selection. Sweep Range: 0.9~3GHz / 5~6GHz Auto-Sweep cycle time: 10~20sec/cycle(L~H) Switcher: Auto / Manual / Fixed Dispaly: 2.5" LCD Frequency Dispaly: 45.2x27mm LCM Antenna Connector: SMA Connector RF Detector Frequency Range: 20MHz~6GHz Power: DC 5V/2A Battery Type: DC 3.7V 3000mA Lithium battery Battery life time: 4.4 Hours Dimension(mm): 99.5x69.5x24.7 mm (Without Battery) Spec in PDF 1 Year warranty - Original made in Taiwan. Neutral packing, ODM OEM Manufacturer and exporter : R&R GROUP INTERNATIONAL Taipei Taiwan, Hong Kong, Dubai UAE
Mode Field Adapters (MFA) can be used for high power fiber lasers and fiber amplifiers. These devices can be used to connect two fibers with different core diameters and numerical apertures (NA). Mode Field Adapter(PM or Non-PM) Features Applications High Transfer Efficiency High Power Fiber Laser High Power Fiber Amplifier Stable and Reliable Custom Configurations Available Specifications Parameters Value Port Configuration 1x1 Signal Wavelength 1030~1080nm or 1450~1600nm SMA Fiber 6/125 10/125 10/125 6/125 20/250 LMA Fiber 10/125 20/125 25/250 20/400 30/250 Signal IL for Forward Route 0.3dB 0.4dB 0.5dB 0.5dB 0.2dB Signal IL for Backward Route 0.3dB 0.5dB 0.7dB 0.7dB 0.2dB Total Handling Power 10W Polarization Extinction Ratio 18dB(PM Fiber Type) Return Loss 45dB Package Dimension D1, D2, D3, D4, D5, D6, D7 Operating Temperature -5~+70 Storage Temperature -40~+85 Ordering Information MFA-11-222-333-44-5-6-777 11 - Port Configuration: 1X1=1X1 222 -Fiber Type for Input: SSS=Specified 333 - Fiber Type for Output: SSS=Specified 44 - Package Dimension: D1,D2,D3,D4,D5,D6,D7, S= Specified 5 -Pigtail Type: 0=250um bare fiber, 1=900um loose tube 6 -Fiber Type: 0=0.8m, 1=1.0m 777 -Handling Power/Signal: 005=5W, 010=10W, 100=100W, 200=200W Notes: 1.Package dimensions: D1:Ï?4.0x60mm, D2:5x5x50mm, D3:70x12x8mm, D4:75x12x8mm, D5=80x14x10mm, D6=100x15x8mm, D7=100x28x12.6mm-HPï¼? 2.Pleased to contact us if you need more fiber selectionsï¼? Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Cylindrical Load High-Frequency Resistor/Microwave Load/Rod Terminations/High Power RF Resistor Detail Information Power: 0.25W-25W Frequency: DC-18 GHz Resistance Tolerance: 1%,2% Resistor Value: 50Ohm SWR: 1.15:1 Operating Temperature: -55°C To +125°C With 25°C As Reference Package-Type: Surface Mount Condition: Original & New Lead-Free Status: RoHS Compliant Product Description features These high power devices are designed to dissipate power in R.f.Circuits when mounted to an appropriate heat sink. The terminations provide a low VSWR under maximum power condition. Material Substrate: Berylium Oxide ceramic Cover: Alumina ceramic Resistive element: Thick film Terminal tensile: Copper Sn (Ag Au) Mounting flange: Copper of planting nickel TECHNICAL SPECIFICATIONS resistor value: 50Ω Tolerance: ±2% Frequency: DC-18GHz SWR:1.15:1 Work temperature: 55~125ºC 50 Ohm Rod Resistors | Products & Suppliers/10 Ohms High Frequency/RF Resistors High Frequency/RF Resistors, 50 Ohms 2 % High Frequency/RFResistors, 200 W 50 Ohms High Frequency/RF Resistors, 20 GHz 50 Ohms High Frequency/RF Resistors, 40 GHz 50 Ohms High Frequency/RF Resistors, 250 Ohms High Frequency/RF Resistors Send us your inquiry with details of the requirement, we will provide a professional RF solution, RF resistor experts. We are dedicated to the development and production of RF resistors. This product is widely used in couplers, attenuators, microwave loads, isolators and power dividers.
Ruik's pm circulator is one type of product, allowing the light to transmit through the route established, from port 1 to port 2, and from port 2 to port 3, blocking the reversed. PM Fiber Circulator (Fast axis blocked) Features Applications Low Insertion Loss EDFA & Raman Amplifier High Return Loss Fiber Sensor High Isolation Fiber Instrument High Extinction Ratio High Reliability& Stability Specifications Parameter Unit Value Type Type A Type B Port Type - 3 Port 4 Port 3 Port 4 Port 3 Port 4Port Center Wavelength 1310 or 1550nm 1310 or 1550nm 1064nm Operating Wavelength Range ±20nm ±20nm ±5nm Typ. Insertion Loss at 23 0.7dB 1.1dB 0.6dB 1.0dB 1.8dB 2.2dB Max. Insertion Loss at 230.9dB 1.3dB 0.8dB 1.2dB 2.1dB 2.5dB Typ. Peak Isolation 23 46dB 30dB 30dB Min. Isolation at 23 40dB 20dB 25dB Min. Extinction Ratio at 23 22dB 20dB 20dB Min. Cross Talk 50dB Min. Return Loss 50dB Max. Optical Power(CW) 300mW Max. Tensile Load 5N Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device. PM Tap & Isolator & WDM Hybrid (Faraday Based) Features Applications Low Insertion Loss EDFA High Return Loss Pump Laser High Extinction Ratio Optics Cutting High Isolation Research Specifications Parameter Unit Value Stage - Single Dual Single Dual Signal Wavelength nm 1064±5 1550±15 Signal Wavelength Range nm 1020~1080 1520~1580 Max. Excess Loss, λc, at 23 2.5dB 3.5dB 1.3dB 1.4dB(Input to Output) Min. Signal Isolation, λc,±15 at 23 35dB 45dB 28dB 45dB(Output to Input) Isolation for Channels Signal Channel 30dB Pump Channel 12dB Tap Ratio 1~50% Pump Wavelength Range 980±10nm Max. Insertion Loss (Pump Channel) 0.7dB Min. Extinction Ratio at 23, only for PM Channel 20dB Min. Return Loss 50dB Max. Optical Power(CW) 300mW Max.Tensile Load 5N Operating Temperature -5~+50 Storage Temperature -40~+85 Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's FWDM Device is a device to combine the two different wavelengths from the fibers to one output fiber. PM FWDM Device Features Applications Low Insertion Loss CATV System High Return Loss CWDM/DWDM Module High Reliability & Stability EPon/Gpon Networks Specifications Parameters Values Type 0698 5598 5506 5548 Transmission Wavelength 1020~1080nm 1520~1580nm 1520~1580nm 1535~1565nm Reflection Wavelength 960~990nm 960~990nm 1020~1080nm 1480±10nm Max.Insertion Loss of Transmission Channel 0.8dB 0.7dB 0.8dB 0.8dB Max.Insertion Loss of Reflection Channel 0.6dB 0.5dB 0.6dB 0.6dB Min.Transmission Isolation@Reflection Wavelength 25dB 30dB 25dB 25dB Min.Reflection Isolation@Transmission Wavelength 15dB 15dB 15dB 15dB Max.Channel Flatness 0.4dB Min.Extinction Ratio at 23 18dB Max. Wavelength Thermal Stability 0.003nm/ Max. Insertion Loss Thermal Stability 0.005dB/ Min.Return Loss 50N Max.Power Handling (CW) 300mW Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Cladding Power Strippers (CPS) can be used for high power fiber lasers and fiber amplifiers to strip unwanted cladding light from dual clad fiber (DCF). Cladding Power Stripper Features Applications High Stripping Efficiency High Power Fiber Laser Low Signal Loss and Beam Quality Degradation Fiber Amplifier Stable and Reliable Custom Configurations Available Specifications Parameters Value Port Configuration 1x1 Signal Wavelength 800~2000nm Pump Wavelength 800~2000nm Signal Fiber X/125 X/250 X/400 Cladding Power Attenuation >20dB >18dB >18dB Signal Insertion Loss 18dB(Input port ER >25dB) Return Loss >45dB Package Dimension D1, D2, D3, D4, D5, D6, D7 Operating Temperature -5~+70 Storage Temperature -40~+85 Ordering Information CPS-1-222-33-4-5-666-777 1 - Port Configuration: 1x1=1x1 222 -Fiber Type for Signal: SSS=Specified 33 - Package Dimension: D1,D2,D3,D4,D5,D6,D7, S= Specified 4 -Pigtail Type: 0=250um bare fiber, 1=900um loose tube 5 -Fiber Length: 0=0.8m, 1=1.0m 666 -Handling Power for Signal: 0005=5W, 010=10W, 0100=100W, 0200=200Wï¼?5000=5000W 777 -Cladding Power:: 0005=5W, 010=10W, 0100=100W, 0200=200Wï¼?5000=5000W Notes: 1.Package dimensions: D1:Ï?4.0x60mm, D2:5x5x50mm, D3:70x12x8mm, D4:75x12x8mm, D5=80x14x10mm, D6=100x15x8mm, D7=100x28x12.6mm-HP 2.Pleased to contact us if you need more fiber selections Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device. PM Tap & Isolator & WDM Hybrid (Faraday Based) Features Applications Low Insertion Loss EDFA High Return Loss Pump Laser High Extinction Ratio Optics Cutting High Isolation Research Specifications Parameter Value Stage Single Dual Single Dual Signal Wavelength 1064±5nm 1550±15nm Signal Wavelength Range 1020~1080nm 1520~1580nm Max. Excess Loss, λc, at 23 (Input to Output) 2.5dB 3.5dB 1.3dB 1.4dB Min. Signal Isolation, λc,±15 at 23(Output to Input) 35dB 45dB 28dB 45dB Isolation for Channels Signal Channel 30dB Pump Channel 12dB Tap Ratio 1~50% Pump Wavelength Range 980±10nm Max. Insertion Loss (Pump Channel) 0.7dB Min. Extinction Ratio at 23, only for PM Channel 20dB Min. Return Loss 50dB Max. Optical Power(CW) 300mW Max.Tensile Load 5N Operating Temperature -5~+50 Storage Temperature -40~+85 Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM devices. PM Isolator & WDM Hybrid Features Applications Low Insertion Loss Fiber Laser High Return Loss Fiber Amplifier High Isolation Testing Equipment High Extinction Ratio High Reliability & Stability Specifications Parameter Value Stage Single Dual Single Dual Signal Channel Signal Wavelength Range 1064±10nm 1550±15nm Max. Insertion Loss 2.6dB 3.8dB 0.9dB 1.0dB Typ. Peak Signal Reversed Isolation, at 23 40dB 52dB 40dB 52dB Min. Signal Reversed Isolation, at 23 28dB 45dB 28dB 45dB Min. Isolation (Com to Pass @ Ref band Wavelength) 30dB Min. Extinction Ratio at 23 20dB Reflection Channel Wavelength Range 960~990nm Max. Insertion Loss 0.6dB Min. Isolation (Com to Ref @ Pass band Wavelength) 15dB Min. Extinction Ratio at 23 18dB Min. Return Loss 50dB Max. Insertion Loss Thermal Stability 0.005dB/ Max. Optical Power(CW) 300mW Max. Tensile Load 5N Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)