Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that follows a T, L or Pi configuration. Their configuration can either be in waveguide, in surface mount or coaxial, and depending on their application, they can either be directional or bidirectional.
Applications:
Attenuators are generally used in radio, communication and transmission line applications to weaken a stronger signal.
50ohm DC-6GHz, 5W SMA Fixed Attenuator Technical Specifications:
Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that follows a T, L or Pi configuration. Their configuration can either be in waveguide, in surface mount or coaxial, and depending on their application, they can either be directional or bidirectional. Applications: Attenuators are generally used in radio, communication and transmission line applications to weaken a stronger signal. 50ohm DC-6GHz, 5W SMA Fixed Attenuator Technical Specifications: NORMINAL IMPENDANCE 50�© FREQUENCY RANGE DC to 6GHz (up to 26.5GHz optional) VSWR â?¤1.2 POWER RATING 5W TEMPERATURE RANGE -55�°C to +125�°C Dimensions: �?16.5*38 mm Attenuation 1,2,3,4,5,6,7,8,9,10,15,20,30dB available, and 1-9dB.�±0.6dB,10-30dB�±1dB 5W SMA Attenuator 6GHz 8GHz 12Ghz 18Ghz 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB 15dB 20dB 30dB 40dB 50dB 60dB 50ohm
Norminal impedance: 50 frequency range: . Dc to 6ghz Vswr: .1 20 maximum power rating: 2 watts average Temperature range: -55c to +125c intermodulation:-120dbc ( ) third-order Attenuation: 3, 6, 10, 15, 20, 30db available, and 1-10db 0.5db, 15-30db 1db. We can offer all power range 2w, 5w, 10w, 25w, 50w, 100w, 200w, 300w Carton packaging
Supplier: 1) plastic injection molded parts
2) mould design and development
3) automotive plastic parts
4) auto electrical parts
5) industrial/automotive battery parts
6) plastic household products
7) gear moulding
8) over moulding
9) insert moulding
Buyer: 1) copper plated/tin plated terminals for auto electrical parts.
Supplier: Steel scrap, rails for rerolling, shredded 210/211, hms 1 and 2 80/20, hms 1, steel turning, tire wire
Application Use for control and connecting cable on data transmission within building management system, speaker audio system and control measurement. Suitable for use in dry and damp environment. Cable Structure & Features Conductor Material : Tinned copper stranded Insulation : Semi-Rigid PVC Drain Wire : Tinned copper stranded Shielding : Aluminium foil laminated screen Outer Sheath ; PVC Sheath Colour : black or gray Technical Data Standard : UL Style 2464 Approvals : UL apporoved Rated Voltage : 300V Testing Voltage : 1500V Flame Retardant : VW-1 Insulation Resistance : Min 20Mx km Min. Bending Radius : 10 x cable diameter Operating Temp. : -30C / +80C
Supplier: 1 lv and mv power cables , telecommunication cables , lsfh ,solar ,instrument and special cables. 2 copper rod 8 mm and copper wire from 1.60 to 3 3 pvc compounds
Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that follows a T, L or Pi configuration. Their configuration can either be in waveguide, in surface mount or coaxial, and depending on their application, they can either be directional or bidirectional. Applications: Attenuators are generally used in radio, communication and transmission line applications to weaken a stronger signal. DC-18G,2W SMA Attenuator stainless steel PassivatedTechnical Specifications: NORMINAL IMPENDANCE 50�© FREQUENCY RANGE DC to 18GHz (up to 26.5Ghz optional) VSWR 6GHzâ?¤1.2 12.4GHzâ?¤1.3 18GHzâ?¤1.35 POWER RATING 2W TEMPERATURE RANGE -55�°C to +125�°C Dimensions: �?8*22 mm Attenuation 1,2,3,4,5,6,7,8,9,10,15,20,30dB available, and 1-10dB.�±0.8dB,15-30dB±1dB 2 Watt SMA Fixed Attenuator 18GHz stainless steel Passivated 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB 15dB 20dB 30dB 50ohm
Supplier: 1. korea cosmetic
2. korea cosmetic raw material
3. consumer goods
4. korea materials, parts, eqipments
Services: We offer all cosmetics from korea.
we are connected to various partners, so we can supply a wide range of products at the lowest prices.
we also offer beauty and plastic surgery products.
in addition, we supply various korean materials, parts, and equipment.
Buyer: Material, parts and equipment
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
