56G QSFP+ ACTIVE OPTICAL CABLES Item NO.: EQA5X-33CDxx Date rate: 56G Wavelength: 850nm Distance: 1-15M Connector: -- DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.4 channels 850nm VCSEL and PIN;Electrical interface compliant to SFF-8436; 2. Support 56GB data rate;Hot Pluggable QSFP form factor; 3. Built-in digital diagnostic functions;Operating case temperature 0°C to +70°C; 4. 3.3V power supply voltage; Round OFNP-rated cable; 5. UL certification cables (optional) Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface 2.Switched backplane applications/Router/Server interface 3.Other optical transmission systems
Marble, granite, stones, slates, tiles, power cord, wires, cables , cable assemblies, tyre scrap, used tyres, steel tire wire scrap, firewoods, pistachios, hazelnuts, textiles.
Lan cable, optic fiber cable, power cable, other chemical.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
ï¼?1ï¼?Product descriptionï¼? USB 3.1 Gen 2 Hybrid active optical cables use fiber optics for data transfers, which is further paired with copper wires for control and power. Slim USB type C to C fiber optic cable with high performance, low power consumption and low cost. Using optical fiber to replace copper wire as the highspeed signal transmission medium, It can perfectly transmit 5G/10G high speed up to 100meters. Compared with the traditional copper wire, it is much longer, softer, thinner, with better signal quality and perfect EMI/EMC feature. It is only one-directional, not bi-directional. Please ensure the "Source" and "Display " connector connect with the relevant device before wiring. ï¼?2ï¼?Product Features ï¼? · Long distance transmission, up to 100 meters · Support 5G/ 10G super high speed · Plug and play · Thinner, lighter and softer than conventional copper cable · Highly resistant with EMI and RFI · No need to supply extra power. Simplified Schematic ï¼?3ï¼?Advantages: Compared with the traditional copper wire, it is much longer, softer, thinner, ligher and more flexible, with better signal quality and perfect EMI/EMC feature. ultra low signal attenuation and latency ï¼?4ï¼?Installation And Testï¼? ï¼?5ï¼?Applications: This cable complies with USB 3.0, and the main application is to transmit the audio video signals between computer, TV, monitor and projector with USB Type C interface. Widely used in Digital signage,home theater, LED signboards in streets and in stadiums, medical imaging equipment, video surveillance & control system ,VR equipment, performance & art center, video conference,Blue-ray, 3D video, projector, set-up box, DVR, game console,etc. ï¼?6ï¼?Note: This Type-C active optical cable is only one-directional , not bi-directional. Please ensure the "Source" and "Display " connector will connect to the relevant device before wiring. ï¼?7ï¼?Packagingï¼? ï¼?7ï¼?Variant and Comparison A) To meet the customers' requirement of more durability of the cable,we can add nylon braid over the PCV jacket B) Cable more than 50meters ï¼?we will use a plastic reel for packaging. ï¼?8ï¼?Why Us: a ) As A State-owned Enterprise With Long History In Wire and Cable Industry Jiuzhou Group (JEZETEK) was established in 1958 as a stated-owned enterpriseï¼?and started to entry in wire and cable industry as early as 1970. b ) With Strong R&D Capability of Wire and Cableï¼?Independent Laboratory and Testing Equipment for Quality Control c )Have Owned Lots of Honors till it established d ) The company has successfully passed certification of SGS, ISO9001: 2000,ISO14001:2015 and OHSAS 18001:2007. And its products have obtained RoHS, CE, UL certificates.
Fiber Optic Cables
MATERIAL : HDPE crushed black color CATEGORY : HDPE TYPE : Regrind SPECIFICATION : It is crushed black color with the optical cable sheath. MI is 1.0-1.5 and T/S is 13-15Mpa. Buyer is using it in producing the pipe and hose Origin : Korea - Buan LOADING WEIGHT: 25 Ton FOD (USD/Ton) : 700$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
40g mm 100m qsfp+ optical transceiver Specification Data rate: 40g Channel: 4*10 Distance: 100m Interface: mpo Fiber: mm Ddm: yes Place of origin: made in china Port:shenzhen Features High channel capacity: 40 gbps per module Up to 11.1gbps data rate per channel Maximum link length of 100m links on om3 multimode fiber or 150m links on om4 multimode fiber High reliability 850nm vcsel technology Electrically hot-pluggable Digital diagnostic sff-8436 compliant Case operating temperature range:0°c to 70°c Power dissipation < 1.5 w Standards Compliant to ieee 802.3ba Compliant to sff-8436 Rohs compliant. Working temperature: commercial: 0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pc/package
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members. Features & Application òExcellent optical, mechanical & environmental performance òHigh strength-to-weight ratio òCSM dielectric type û Fiber Reinforced Plastic òDry block construction òHigh tensile strength òHigh crush strength òCorrosion resistance òKINK resistance òVery light weight òVery flexible & small bending radius òLong haul / backbone application òJunction communication systems òAll dielectric applications òCATV applications. Construction Parameters Fiber Count 02 û 144 Fibers Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Second (Outer) Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type û fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction Parameters Fiber Count As per CustomerÆs Requirement No. of Loose Tube As per CustomerÆs Requirement G.655 As per CustomerÆs Requirement G.652 As per CustomerÆs Requirement Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP) Armoring Corrugated Steel Tape Armoring Peripheral Strength Member (if required) Aramid / Glass Yarn Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Outer Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
Product description This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings. Features & application Excellent optical, mechanical & environmental performance Csm dielectric type û fiber reinforced plastic High tensile strength High crush strength Aerial application Application in lan, wan, especially in ftth networks Easy to clamp and install Can bear ice loads and high wind pressures. Construction Parameters Fiber Count 02 to 12 Fiber Fiber Type G.652.D Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm Nominal Cable Delivery Length (km) 2 KM + 3% . Mechanical Characteristics Tensile Strength (N) 600 Tensile Strength (N) (Installation) 1000 Crush Strength (N) 2,000 Minimum Bending Radius (mm) 75 Temperature Operating Range -10 to +70¦C.
Characteristics: .High strength kevlar yarn member. .High quality tight buffered or loose tube. .Soft and easy to strip. .Round construction. Application: .Adopted to indoor distribution. .As pigtail of communication equipment. .Suitable for communication equipment served. .Can be installed conveniently and perated simply. Standard package
Optical cable Application: CATV Test equipment Metro Applications Active device termination Local Area Networks (LANs) Data processing networks Premise installations
Features - Full-duplex active optical cable - Up to 10.3125Gb/s per channel - Hot-pluggable SFP+ MSA-compliant connectors - 1W maximum power dissipation per end - Built-in digital diagnostic functions - Commercial operating case temperature range: 0 to 70�°C - RoHS-6 compliant (lead free) Applications - High performance computing interconnect - 10G Ethernet interconnect
Features - Transmission data rate up to 25.78Gbps - 850nm VCSEL laser - PIN photo-detector - Internal CDR on both transmitter and receiver channels - Low power consumption < 1W - Hot-pluggable SFP28 form factor - Up to 70m on OM3 MMF and 100m on OM4 MMF - Digital diagnostics functions are available (optional) - Operating case temperature range 0�°C to +70�°C - 3.3V power supply voltage - RoHS-6 compliant Applications - IEEE 802.3by 25GBASE-SR
Data rates : 56G-PAM4/ 25G-NRZ Maximum data rate: 400Gb/s (8 x 50Gb/s) Connector Compliant with QSFP 28 SFF 8665 Low Power Consumption
PE coil pipes and tubes for water and wire cable conduit PL231 The PE coil pipes and tubes can be used: water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm We use new 100% pure raw PE material WHY NEW MATERIAL HDPE PIPES? 1. Health performance PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria. 2. Corrosion resistance It can resist various chemical media erosion, with no electrochemical corrosion. 3. Service life Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years. 4. Impact resistance PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break. 5. Connection performance The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load. 6. Construction performance It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.
