The 3D Dynamic CO2 Laser Marking Machine is controlled by the computer, can mark on the surface of processing materials along the desired track through 10.64um laser beam s beam expanding, focus, galvanometer s deflection to achieve the engraving effect.
Application 3D Dynamic CO2 Laser Marking Machine can accomplish invitation & greeting paper card's hollowing and cutting process. Comparing with normal CO2 Laser Engraving & Cutting Machine, it has smaller carving line and high speed hollowing speed (one normal paper card hollowing can be finished in 1-2 seconds), therefore, the final product will have no black cutting edge and increase the processing efficiency. It can also be used for wood, leather, shoes, marble, plastic processing, including carving, drilling, cutting etc. Advantages 1) Permanent: Mark will not subside because of environmental reasons (touch, acidic or reducing gas, high or low temperature etc). 2) Non-contact: Laser marking is a non-mechanical â??light knifeâ?� for processing, the workpiece will not produce stress after marking. The working surface will not produce corrosion, no â??toolâ?� worn, non-toxic, non-polluting. 3) Wide application: CO2 Dynamic Laser Marking Machine can work on all non-metal materials (Textile, Leather, PMMA, Wood, MDF, Paper, Marble, Glass etc) 4) High precision for engraving & marking CO2 Dynamic Laser Marking Machine can engrave fine pattern, the minimum line width can reach to 0.04mm. Engraving & Marking result is clear, durable and beautiful. 5) Low operating cost: Low energy consumption, no consumptive materials, and therefore lower operating costs. 6) High efficiency: CO2 Dynamic Laser Marking Machineâ??s Engraving&Marking speed can reach to 7-10m/s, three times than that of traditional laser marking machine, marking process can be completed in seconds. 7) Large marking area: With the higher power laser tube and the 3D Scanner technology, the CO2 Dynamic Laser Marking Machine can work on large size materials such as clothes processing, leather processing, LGP (Light Guide Plate for LED Panel Light and TV) processing. 8) Easy development: Due to the combination of laser technology and computer technology, the laser print can be realized by the order from the computer program, and may change the print design at any time, replaces the traditional mold marking process from the fundamental, shorten the product upgrade cycle and provide a convenient tool for flexible production.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
3D CO2 Laser Marking Machine professional laser marking machine 3D Laser Marking Machine supplier MYST Fiber laser marking machine with excellent quality is one of our 2020 New Design laser marking machine,this machine was professional working on nonmetal material(Plastic,Fabric,Rubber,Glass,Brick) with professional DAVI laser generator, Professional scan head(DAVI,FEELTEC), industrial PC and MM3D/LenMark 3D software,that s why our fiber marking machine can use more than 10 years . This also is a new design fiber laser marking machine all the parts integrated to the machine body .it is easy moving with the wheel with it .it is good choice for a small shop or your factory . Why our 3D CO2 Laser Marking Machine more better? High precision of 3D positioning technology, high-speed focusing and scanning system With Taiwan 3 axis dynamic system, large marking range, more precise light spot diameter With dust absorb system making your working clean High photoelectric conversion rate, long service life and easy maintenance Fast working speed improve the Processing efficiency Smaller focus spot,which can make engraving, cutting, punching more precision Laser power : � Perfect quality fiber Laser Source Working area : from 300*300 to 1200*1200mm Red point : Clear the working path when it working Control system : China PC ( you can also order computer by yourself ) Control software : Taiwan control system Power consumption : 1 kw /H Voltage AC220V�±10% ,50/60HZ or by customer need voltage 3D Laser Marking Machine After-sale Service: 36 months guarantee of the whole machine, we will provide replacement or repair service when you need it. Software is on update for free whole life. English manual and CD video for machine using and maintaining will send to you with the machine. Our engineer can offer technical support in your country if necessary,or get train in our factory for free. 7*24h online technical support via Skype,Email,WhatsApp,Phone,Team Viewer,even on weekend even on vacation. What is Mainstream types of laser marking machines in 2020? They are fiber laser marking machine, 3d CO2 laser marking machine and semiconductor laser marking machine. For more information on precision laser cutting machine, please click here to browse our website.
CO2 Laser Marking Machine CO2 Laser Marking Machine for sale custom Laser Marking Machine factory Why our CO2 laser marking machine more better Compact and portable structure Easy put into your trunk or your car boot Perfect Marking Performance Fiber source can use 30000 hours Working speed 5000-10000mm/s Field Lens from 110 to 600mm (different working area price different) High Speed scan head Red point : Clear the working path when it working. Control software : EZCAD Power consumption : 1-2 kw /H. Voltage AC220V10% ,50/60HZ or by customer need voltage. 5 years machine produce experience we have mastered the core technology of the Co2 laser marking machine. laser marking machine After-sale Service: 36 months guarantee of the whole machine, we will provide replacement or repair service when you need it. Software is on update for free whole life. English manual and CD video for machine using and maintaining will send to you with the machine. Our engineer can offer technical support in your country if necessary,or get train in our factory for free. 7*24h online technical support via Skype,Email,WhatsApp,Phone,Team Viewer,even on weekend even on vacation. Our CO2 laser marking machine has many advantages such as compact and portable structure, perfect marking performance and fiber source can use 30000 hours. What is Mainstream types of laser marking machines in 2020? They are fiber laser marking machine, 3d CO2 laser marking machine and semiconductor laser marking machine. For more information on precision laser cutting machine, please click here to browse our website.
Technical parameters (the working area and laser power can be customized according to requirement) Model of machine CX-CO2-30/60/80/100(optional) Laser tube Co2 laser tube Cutting area110mm 110mm /300mm 300mm(optional) Laser power 30w/60w/80w /100w(optional) Marking speed0-7000mm/s Operating voltage Ac220v 10%, 50hz Location precision 0.01mm Working environmentTemperature humidity 0-95% Min. Line width0.015mm Min. Character0.3mm Graphic format supportedBmp, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, COMPATIBLE HPG ORDER, SUPPORT DXF, PLT, BMP and dxt(tiandao embroider software), etc. Marking depth 0.01-0.2mm Working tableLift platform up to 1, 000mm from the bottom to the top Auxiliary devic eExhaust fan and cooling system Laser wavelength1064nm. Wooden case
Applying imported american co2 radio frequency laser and high-speed scanning lens system, collocated with high qualified optic components, stable laser electrical source and full auto-controlling system, produces precise, reliable and fast performance and long time's continuous running as well, it can be directly applied to mass manufacturing streamlines. Different powers ranging from 10 - 350w
1.Introduction The laser marking machine YMM-10C is applicable to almost any non-metal surface. It has many clear advantages with comparison to traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free (Tools wear in stamping systems). Laser marking offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any surface. 2. Features Unique optics design Friendly and ergonomical man-machine interface Stable, precise and high-speed File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.. Embedded test and graphic design tools offers various editing features Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, Data Matrix, QR Code, etc. , and serial numbers 3. Technical Parameters Wavelength 1064 nm Aiming laser Red Linear speed Adjustable, max 5000 mm/ s Line width Min 0.2 mm Letter size Min 0.8 mm Marking area F=160 mm 70 mm í- 70 mm F=220 mm 100 mm í- 100 mm F=250 mm 150 mm í-150 mm Power supply Single-phase AC 220 V í+ 10%, 50 Hz / 60Hz Input power Max 210W Dimension 550 mm x 290 mm x 650 mm Net weight ~33.75 kg Cooling Mode Air cooling 4.Standard Configuration Laser machine í- 1 set PC í- 1 set Marking software (In English) í- 1 set Operation manual (In English) í- 1 Wooden Case
Application 3D Dynamic CO2 Laser Marking Machine can accomplish invitation & greeting paper card's hollowing and cutting process. Comparing with normal CO2 Laser Engraving & Cutting Machine, it has smaller carving line and high speed hollowing speed (one normal paper card hollowing can be finished in 1-2 seconds), therefore, the final product will have no black cutting edge and increase the processing efficiency. It can also be used for wood, leather, shoes, marble, plastic processing, including carving, drilling, cutting etc. Working area: 600mm*600mm Including: 150W CO2 Metal RF Laser Tube Galvo Scanner Foot Switch Honeycomb table Exhasuting System
Marking for Non-Metal material bases, like leather, fabric. wooden, bamboo base, paper, glasses, plastic,acrylic etc Widely applied for the industries of medicine, packing. leather products, garments, wooden product, craft works
Widely used inglass,button,sign board,shoe material,cloth,package,toys,food,drink,pharmaceutical,daily cosmitics and craft gifts etc.various industries. Applicable for most of non-metal,such as wood products,leather,cloth,paper,glass,expory resin.acrylic etc.non-metal material and part metal that carried out surface treatment,such as Aluminium surface oxidized black color,iron surface painting etc. It has different power with different, so if you are interested in this kind of machine, welcome contact us for more info.
1. Independent developed 3D laser marking software and hardware. To work with special 3D galvanometer scanner,it can do good marking on various 3D products. 2. Seamless splicing of 3D graphics ensures high precision processing control. The accuracy is ±0.03mm. 3. Type and power of laser module are optional according to marking,engraving or cutting requirements. 4. High Stability, optimized design of control system ensures stable processing and yield rate. 5. High Reliability, rapid cache transmission control,choice optical and electronic elements to make sure continuous work in long time and capacity. 6. Long Life Time, high quality fiber laser module ensure long life time to the system. 7. Safety, fully enclosed design which highly enhances safety during processing. 8. High efficiency, reduces processing time by equipping an automatic door in protective cover.
The machine adopts radio frequency laser (metal sealed RF laser) and speedy galvo scanning system. All the fittings can meet the pipelining processing continues dynamic on line with the proprietary working control software. It can realized automatic edition and correction of characters, signs, graphs, images, bar codes, two-dimensional codes, automatically increased serial numbers.
Model No. CY-CO2 50W 10W/30W/50W/100W/150W/300W Marking depth
Description- A mirror galvanometer is used to scan the laser beam and mark the product surface. Moving the focus lens (used instead of the f lens) back and forth enables adjusting the beam not only on the x and y axes, but also on the z axis. 3D Software Extension Ideal for the three-dimensional reproduction of designs and engravings with major detail, requiring different levels of engraving depth. This software extension, optionally provided, is based on the management of STL files, allows the 3D reproduction of solids authentic to their real proportions. 3 Axis Auto-Movement Axis position management through software, allowing the serial marking of multiple objects on the same tray and at the same time, even having different shapes and sizes. Based on the management of Cartesian coordinates, the use of this module, makes possible to program the movement of all axes depending on the position of the objects to be LASER-marked, making possible to boost productivity by the serial marking. Features- Hi-tech technology Permanent, high quality marks High efficiency and low operation cost Good accessibility, even to irregular surface Non-contact marking and no special working environmental needed The minimized metallurgical and mechanical damage Easy to automate and integrate (direct writing of patterns can established Using computer-controlled movement of the beam or sample) Precise beam positioning and a beam highly localized energy Transfer to the work piece High reproducible and high speed, effective Minimal heat load Contamination free Technical Specifications- Model SIL Accuwrite F 3D 50/60/100 Watts Power 20 W to 100 W Wavelength 1063 ±3 nm Beam quality
CO2 Laser is one kind of gas laser which produces mid-infrared light at 10.64um. This laser efficiently converts electrical energy to optical energy and thereby produces a high laser power to process the materails . Our CO2 Laser Series equiped the importing RF CO2 Laser,High-Speed Resonace Mirror System .The speed is quicker and the performance is stable.This series Laser Equipments have widely won userí»s trust depend on ití»s superior performance and reliable quality. Application & Materials: This type lasers may carving many kind of nonmetallic materials such as clothing supplementary materials, medical packing, building ceramic, drink packing, fabric cutting, rubber products, the cover of nameplate, arts&crafts, electronic parts, lether etc.The patterns clear fine, non-consume materials, stable function, the complete machine exempt the maintenance time to be possible to reach at 20, 000 hour. Type:10W,30W,50W,100W G.W.:200kg Size:1300mm*1200mm*1300mm
1. Marking process in automation, fast speed, high efficiency, good anti-counterfeit; 2. Stable equipment performances, the optical system can be adjusted as to and fro, up and down, and can be equipped with red light position indicating device; 3. Adopts advanced digital high speed scanning galvanometer, quick speed without deviation, small volume, good stability, and performance reached the international advanced level. 4. Modular design, separate laser generator and lifter, more flexible, can mark on bigger area and complicated surface. Air-cooled inside, small occupation, easy to install. 5. Adopt the embedded operating system, which the performance is leading domestic peers, good touch interface and powerful control system, can meet the demand of most industry application process in market. Control software supports automatic encoding, variable text, date, serial number, lot number, bar code and two-dimensional code printing, and can be modified according to customers' different needs of production line flexibly. 6. Adopt special flying marking control system, with good performance and easy operation. Can easily match with producing line and work continuous 24 hours which meets industrialize large-scale production. 7. High efficiency for photoelectric conversion, simple operation, Compact in structure, support harsh working environment, no consumables. 8. CO2 laser marking machine performs excellent while marking on transistor, chip component, IC, Ceramic capacitor, thermistor due to its effects of nice extrinsic feature, clear writing and anti-friction. It especially specializes in automatic machining process for marking on bulk packing or strip packing components.
1. Marking process in automation, fast speed, high efficiency, good anti-counterfeit; 2. Stable equipment performances, the optical system can be adjusted as to and fro, up and down, and can be equipped with red light position indicating device; 3. Adopts advanced digital high speed scanning galvanometer, quick speed without deviation, small volume, good stability, and performance reached the international advanced level. 4. Modular design, separate laser generator and lifter, more flexible, can mark on bigger area and complicated surface. Air-cooled inside, small occupation, easy to install. 5. Adopt the embedded operating system, which the performance is leading domestic peers, good touch interface and powerful control system, can meet the demand of most industry application process in market. Control software supports automatic encoding, variable text, date, serial number, lot number, bar code and two-dimensional code printing, and can be modified according to customers' different needs of production line flexibly. 6. Adopt special flying marking control system, with good performance and easy operation. Can easily match with producing line and work continuous 24 hours which meets industrialize large-scale production. 7. High efficiency for photoelectric conversion, simple operation, Compact in structure, support harsh working environment, no consumables. 8. CO2 laser marking machine performs excellent while marking on transistor, chip component, IC, Ceramic capacitor, thermistor due to its effects of nice extrinsic feature, clear writing and anti-friction. It especially specializes in automatic machining process for marking on bulk packing or strip packing components.
CO2 laser marking machine is a gas laser machine whose frequency band wave length of infrared light is 10.64nm, CO2 gas is filled in the discharge tube as th emedium to produce laser, when high voltage is added to the electrode, it will produce glow discharge in thedischarge tube and then the gas molecule will discharge laser, after the energy of laser is strengthed it will form the laser beam to produce. Computer controlled resonance nirror can change the path of the laser beam so that automatic marking can be accomplished.
CO2 laser marking machine is a gas laser machine whose frequency band wave length of infrared light is 10.64nm, CO2 gas is filled in the discharge tube as th emedium to produce laser, when high voltage is added to the electrode, it will produce glow discharge in thedischarge tube and then the gas molecule will discharge laser, after the energy of laser is strengthed it will form the laser beam to produce. Computer controlled resonance nirror can change the path of the laser beam so that automatic marking can be accomplished.
