3 Phase Solar Inverter Three-phase solar inverters are designed for large-scale solar power systems. They are capable of handling higher levels of power, and three-phase inverters offer higher efficiency and reliability compared to single-phase inverters, making them ideal for larger systems.
3 Phase Pure Sine Solar Inverter 100kw motor loads Bangzhao pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply. The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave. Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made.
Characters: 1. Second generation of mppt function: automatic /don¡¡¥t need set mppt voltage by lcd/led. Efficiency max 30% higher than the inverter who need to setting the mppt voltage, more Output flow. 2. Fully automatic operation, non parameters to setting. 3. One key for startup/ stop: knob switcher support adjusting the output flow 4. Minimum dc input (pv output )voltage: 50~90v 5. Protection: high temperature, over voltage, over current, over load, input anti reverse, Short circuit, phase lost , dry water pumping, against lighting. 6. Automatic pv / ac / diesel switcher 7. Lcd/led display 8. Well and tank's water level detecting, optional of pressure sensor. 9. Gprs sms control on/off 10. Ip64 waterproof 11. Non battery
On grid / Grid-tied Rated power: 4200W No. of MPPT: 2 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 355*412*153mm Net weight: 13.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 5000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 21kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 4600W No. of MPPT: 2 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 355*412*173mm Net weight: 14.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 6000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 21kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 15000W No. of MPPT: 2 Strings per MPPT: 2+1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 24.8kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 12000W No. of MPPT: 2 Strings per MPPT: 2+1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 24.8kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 10000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 23.2kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 8000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 23.2kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 5000W No. of MPPT: 2 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 355*412*173mm Net weight: 14.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
High Frequency On grid / Grid-tied Rated power: 6000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Single phase Warranty: 10 years Dimension(W/H/D): 355*412*201mm Net weight: 16.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 110KW No. of MPPT: 10 Strings per MPPT: 2 Phase: Three phase Dimension(W/H/D): 1050*660*330mm Net weight: 98kgs
5 kva off and on grid max efficiency to 98% wide input voltage range high efficient MPPT lcd display small and light easy to install
Off grid Rated power: 1000W Dimension(W/H/D): 225*355*92mm Net weight: 5kgs LCD display This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator Support parallel operation up to 3 units (available for 3KW-5KW 48V) This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power : 3KW Pure sine wave solar inverter Output power factor 1 Built-in 80A MPPT solar charger Built-in anti-dust kit for harsh environment WIFI remote monitoring (optional) Compatible to generator PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
