Please click here to check who's online and chat with them.

3 Phase 100Kw Pure Sine Solar Inverter

Supplier From China
Jun-23-16

3 Phase Pure Sine Solar Inverter 100kw motor loads
Bangzhao pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply.
The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave.
Technical Features:
 
* Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
*Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
* Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features.
*Adopted low frequency isolated transformer, high conversion efficiency and stable performance
* Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc.
* Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices
* Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated.
* Pure sine wave output, has higher efficiency and higher capability of driving load.
*Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection
* Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
* The input voltage, output voltage, frequency and phase can be custom made.


Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: 3 Phase 100Kw Pure Sine Solar Inverter

GOLD Member
Jan-16-23
Supplier From Beijing, Beijing, China
SILVER Member
VERIFIED
Aug-21-15
Buyer From Kolkata, West Bengal, India
Sep-06-22
 
1.Running without battery
2.Pure sine wave inverter
3.Off grid
4.MPPT controller:80A
5.Maximum PV Array Power:2KW
6.Voltage:24V
GOLD Member
VERIFIED
Mar-15-25

En590 Diesel 10Ppm Ulsd, Export Grade

$0.00 - $0.00 / Metric Ton (FOB)
MOQ: Not Specified
Supplier From Singapore, Singapore
 
EN590 FOB TTV Seller Procedure
Origin : Kazakhstan
Loading port: Singapore port
UNIT PRICE : USD 490/MT
PAYMENT TERMS : MT103
TRANSACTION TERM : FOB

1. Buyer accepts seller working procedure and issue ICPO
2. Seller's issues commercial invoice (CI), Buyer signs and returns back commercial invoice.
3. Seller issue TSR with GPS coordinate to Buyer Company,
4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. ( Note* One day extension fee is 78,000 usd and will be deduct when buyer is paying total amount )
5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties.
6. Seller injects product into Buyer's vessel or injects into Buyer's tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.
GOLD Member
VERIFIED
Nov-30-24

En590 10Ppm Ulsd

$1.00
MOQ: Not Specified
Supplier From Singapore, Singapore
 
En590 10ppm Diesel
Vopak-to-vopak Procedure:
1- Buyer Sends Cis + Cp
2- Conference Call /meeting Between Buyer & Seller Where Both The Parties Exchanges
Vopak Tank Coordinates
3- Seller Release Ci, Buyer Counter Signs
4- Seller Releases Full Pop With Fresh Sgs Report
5- Buyer Makes Full Payment Via Mt 103
6- Seller Transfers Title To Buyer
7- Buyer Pays Commission To Intermediaries
8- Seller Issues Spa Contract For 12 Months
Platts {-} Minus 50 U$d Nwe And U$d 10.00 Commission Payable By The Buyer. Hence Net Cost To
The Buyer Will Be Nwe Platts {-} Minus 40 U$d
Product: En590-10ppm
Quantity: 100,000 Mt
Availability: Fob Rotterdam {vopak Tank/s}
Monthly Deliveries In Annual Contract
Conditions: Ncnda { Attached} And Intermediary Services CONTRACT {ATTACHED} will be signed
by the Buyer once their CIS + CP is accepted by the Seller.
GOLD Member
VERIFIED
Aug-30-24

En590 10Ppm Kazakhstan Origin

$1.00
MOQ: Not Specified
Supplier From Singapore, Singapore
 
CI DIP AND PAY FOB TTT Rotterdam PROCEDURE

1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.

3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.

4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.

5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
GOLD Member
VERIFIED
Oct-12-21
Buyer From Aurangabad, Maharashtra, India
GOLD Member
Mar-20-25

En 590, Jet A-1 And Other Fuels, EN 590, Jet A-1 and other fuels

$1.00 - $1,000.0k / Metric Ton (FOB)
MOQ: Not Specified
Supplier From Sheridan, Wyoming, United States
 
After numerous years in the fuel trades, we have been successful in building a solid business relationship with a strong global supplier. Initially, our contracts were limited, but now this restriction has been removed. That said, it appears time for us to initiate a positive working program with the following benefits:
1. Strong supplier with over 24 refineries world-wide.
2. Established track record within the market for EN 590, Jet A-1 and other specialty fuels.
3. Attractive pricing with deep-discounts against Platts.
4. Experienced and reputable administrative team.

We recommend you contact us with your buyer needs defined in detail. For quote consideration, we require listing of the product(s) you wish to consider contracting. We will respond within 72 hours with available specifications, tonnage delivered each month and procedures. Beneficiaries and broker-related contacts will receive commissions immediately upon closing and wired to their individual paymaster accounts. That's it! We try to make the sales and delivery process a pleasure.
GOLD Member
Aug-29-18
Supplier From Sheridan, Wyoming, United States
 
WE MAY HAVE THE COAL OR PET COKE THAT YOU ARE LOOKING FOR. WE ARE CURRENTLY SHIPPING AT THIS TIME AND WELCOME AN OPPORTUNITY TO BE OF SERVICE.
PLEASE SEND US FULL SPECIFICATIONS OF WHAT YOU REQUIRE AND TARGET PRICING.
# Description Comments
1 Coking Coal Low Vol, Mid Vol and High Vol Coal
Tonnage Available 65K MT-100K MT/Month/36 Months
Delivery Port East Coast USA (Norfolk or Baltimore)

2 Thermal Coal Sulfur: <1.0%, <2.0%, <3.0%
Tonnage Available 100K MT/Month/36 Months
Delivery Port Gulf Port USA (New Orleans or Mobile)

3 Green Petroleum Coke Sulfur: <5.0%, <7.0%
Tonnage Available 55K â?? 70K/Month/36 Months
Delivery Port Gulf Port USA (Houston)


1. List of coal products required with a copy of current buyer name, contact, specifications, monthly tonnage and price point.
2. Copies of any available third-party COA data sheets. (Letâ??s determine if we can source what they are buying currently.)
3. We do not send out blind requests to potential buyers/end-burners, therefore you will not be brokers, but our Agents.
4. If we can source, we will revert with our Fixed Corporate Offer (FCO) which will be open for a limited period of time. (Usually 14 days).
5. Should Buyer wish to go to contract, we will prepare our draft document after receipt of signed/approved FCO.
6. Unless we can obtain total transparency, letâ??s not proceed with this venture.

We sell only FOBT USA PORT. However if you can provide (2) LCâ??s, (1) being for shipping and (1) being for product, we can arrange shipping. We also require the name of the Bank which will be issuing the LC. We have received far too many Broker requests that have been unrealistic and in fact, not real!

IF YOU ARE A CHINESE BUYER, WE REQUIRE A PROOF OF FUNDS FROM A US BANK TO COME FROM THE ACTUAL BUYER AND NOT A BROKER. IT MUST COME ONLY FROM THE COMPANY THAT WILL ISSUE THE LC.

Please contact us with you Target Pricing. We do not pay any commissions, but will allow whatever the issuer of the Payment Instrument allows and approves the fees/commissions to the sale price as this will part of the sale contract.
PLEASE SEND US YOUR REQURIED QUANTITIES AND TARGET PRICING.

Verification Status