2K Pu Varnish Glossy Solvent Base Suppliers and Manufacturers

Black Pepper Oleoresin Botanical: Piper nigrum Family: N.O. Piperaceae Hindi Name: Gol Mirch General Description: The best Pepper of commerce comes from Malabar. Pepper is mentioned by Roman writers in the fifth century. The plant can attain a height of 20 or more feet, but for commercial purposes it is restricted to 12 feet. The plant is propagated by cuttings and grown at the base of trees with a rough, prickly bark to support them. Between three or four years after planting they commence fruiting and their productiveness ends about the fifteenth year. The berries are collected as soon as they turn red and before they are quite ripe; they are then dried in the sun. Geographical Sources: Black pepper is native to Malabar, a region in the Western Coast of South India; part of the union state Kerala. It is also grown in Malaysia and Indonesia since about that time when it was found in the Malabar Coast. In the last decades of the 20th century, pepper production increased dramatically as new plantations were founded in Thailand, Vietnam, China and Sri Lanka. The most important producers are India and Indonesia, which together account for about 50% of the whole production volume History/Region of Origin: In South India wild, and in Cochin-China; also cultivated in East and West Indies, Malay Peninsula, Malay Archipelago, Siam, Malabar, etc. Varieties -> in trade, the pepper grades are identified by their origin. In India -> The most important Indian grades are Malabar and Tellicherry (Thalassery). The Malabar grade is regular black pepper with a slightly greenish hue, while Tellicherry is a special product. Both Indian black peppers, but especially the Telicherry grade, are very aromatic and pungent. In the past, Malabar pepper was also traded under names like Goa or Aleppi. Cochin is the pepper trade center in India. In South East Asia, the most reputated proveniences for black pepper are Sarawak in Malaysia and Lampong from Sumatra/Indonesia. Both produce small-fruited black pepper that takes on a greyish colour during storage; both have a less-developed aroma, but Lampong pepper is pretty hot. Sarawak pepper is mild and often described fruity. Description: Oleoresin Black Pepper is the natural extract of dried tender berries of Piper Nigrum Linn of family Piperaceae. Manufacturing Process: It is obtained by the solvent extraction of Black Pepper and the solvent traces are removed by distilling it in vacua at controlled temperature. Physical Appearance: It is a yellowish brown viscous liquid with pungent slightly biting aroma of Black Pepper.

Liquid Ethyl Acetate: Ethyl Acetate is an ester of Ethanol and Acetic Acid, (systematically Ethyl Ethanoate, commonly abbreviated EtoAc or EA) an organic compound having formula CH3COOCH2CH3. Liquid Ethyl Acetate is a colorless solvent has a characteristic sweet / fruity smell. We are a distinguished Liquid Ethyl Acetate Exporter based in India. Liquid Ethyl Acetate, offered by us, is perfect in formulation is well-tested. Further, we welcome bulk orders for Liquid Ethyl Acetate with complete sense of responsibility. Applications: - Ethyl Acetate is used in a variety of coating formulations such as epoxies, urethanes, cellulosic, acrylics and vinyl’s. - Applications for these coatings are numerous wood furniture and fixtures, agricultural, construction and mining equipment, auto refinishing, and maintenance and marine uses. - Ethyl Acetate has applications as a solvent in inks for flexographic and rotogravure printing. - It is used as an extraction solvent in the production of pharmaceuticals and food, and as a carrier solvent for herbicides. - High purity product can be used as a viscosity reducer for resins used in photoresist formulations in the electronics industry.

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Another name - ethyl alcohol, alcohol Chemical formula -C2H6O Molecular weight - 46.07 Ethanol can be mixed with white spirit; used as adhesive; nitro paint spraying; solvent for varnish, cosmetics, ink, paint remover, etc.; raw materials for manufacturing pesticide, medicine, rubber, plastic, artificial fiber, detergent, etc.; it can also be used as antifreeze, fuel, disinfectant, etc

Another name - ethyl alcohol,alcohol Chemical formula -C2H6O Molecular weight - 46.07 Ethanol can be mixed with white spirit; used as adhesive; nitro paint spraying; solvent for varnish, cosmetics, ink, paint remover, etc.; raw materials for manufacturing pesticide, medicine, rubber, plastic, artificial fiber, detergent, etc.; it can also be used as antifreeze, fuel, disinfectant, etc

The Chair Completely Used Of Natural Rubber Wood, Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

The Chair Completely Used Of Natural Rubber Wood Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

The Chair Completely Used Of Natural Rubber Wood Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

They are clear water-white liquids, chemically stable and non-corrosive and possess a mild odour White spirits and mineral spirits blends are used as solvents or diluents in thinners for paints and varnishes, paint driers, colour printing of fabrics, metal cleaning and degreasing, preparation of furniture, shoe and floor polishes, dry cleaning formulations and in the rubber industry.

Size: 430*470*900 The Chair Completely Used Of Natural Rubber Wood, Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

Size: 430*470*900 The Chair Completely Used Of Natural Rubber Wood, Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

Size: 450*640*850 The Chair Completely Used Of Natural Rubber Wood, Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.