24W Poe Injector Suppliers and Manufacturers

24W, 48V/24V output power Data rate: 10/100Mbps Full protection for OCP, OLP and OVP LED indication for power and POE status

Single-port Ethernet power supply equipment, which is suitable for indoor use, can work normally from 100VAC to 240VAC input voltage. The power supply and network terminal equipment are connected by over five types of cables. It has an Ethernet data port and an output port after data and power combination. This device can provide POE power supply applications in line with IEEE802.3af/at international standards for all Ethernet devices, such as routers, switches, wireless AP, network telephones, industrial network terminals, network cameras, etc. It can also provide efficient engineering in places where power supply cannot be provided remotely or where power supply by Ethernet network lines can be used to improve system reliability and simplify equipment installation.

PT-PSE105GBS-E is an indoor rated fiber PoE Media converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc. Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, but can work outdoor by covered with waterproof case. PoE Injector for information kiosks After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.63A up to 90W power with 6KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates.  High quality PoE Injector works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks. PoE Injector for POS For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. We are PoE supplier PoE Injector for information kiosks Specifications Parameter Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-E Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48 Vdc DC Input Current: 8.0A

PoE Injector for door locks PT-PSE105GBS-D is a single port fiber PoE Media converter with 4 Pair PoE up to 90 watts of power with 6Kv surge protection PoE Injector for displays Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE Injector for information kiosks Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 50-57Vdc, the output voltage follows input and operates under -40 to +65,  For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. It is suitable for special scenarios, like highway side, exurb, etc. PoE Injector for IoT application Specifications Parameter high quality PoE Injector Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-D Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block   *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 50-57Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 50-57Vdc     Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV  Differential mode surge protection (10/700us): 1.5KV  AC Surge Protection Line-Earth 1.2/50us (8/20us):2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*1, SFP slot*1 Size:144.5 X 96 X 35.4mm Weight: 485gï¼?1.1lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green SFP fiber indicator: Green PoE data indicator: Yellow Warranty 2 year

Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. poe injector 60w Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter PoE Injector for camera Description Key Features Wall-mounted Part Number PT-PSE106GW-AR-D Ports   condition LAN Port*1, DC Input   Port*1, PoE Output Port*1 Regulatory   Compliance     IEEE802.3bt     RoHS Compliance     WEEE Compliance Pass Through   Data Rates 10/100/1000 Mbps Output Pin   Assignment and Polarity:     4/5 (+), 7/8 () and 3/6 (+), 1/2 ()     Output Power Voltage: 55Vdc     User Port Power: 60W Guaranteen Input DC   Input Voltage: 36 to 72 Vdc     DC Input Current: 2.5A Working   Environment Operating   Temperature: 0 to 40     Operating Humidity: 20% to 80%, non-condensation     Storage Temperature: -20 to 70     Storage Humidity: 10% to 90%, non-condensation     Operating Altitude: up to 5000meters PoE Surge   Protection Protected   line: 1,2,3,4,5,6,7,8     Common mode surge protection(10/700us): 6KV      Differential mode surge protection (10/700us): 1.5KV      Line-Earth 1.2/50us (8/20us): 6KV     Line-Line 1.2/50us (8/20us): 4KV AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV     Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case:   Plastic     Color: Black     Mounting: Wall-mounted     IP Rated: IP40     Connectors: Shielded RJ-45*2     Size: 193mmX 85mmX 41mm      Weight: 380gï¼?13.4ozï¼? LED Indicator Power   Indicator : Green     PoE Load Indicator :  Green   @â?¤30W                                          Blue      @ï¼?30Wâ?¤60W Warranty 2 year Safety   Approvals CE/FCC

PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for IP Cameras Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65,  For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd injecteur poe Specifications Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-E Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 1/2(-),3/6(+) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48Vdc DC Input Current: 8.0A Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV  Differential mode surge protection (10/700us): 1.5KV  Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 95mmX 35.4mm  Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year

Port 30w per port 19" poe midspan injector • ieee802.3at detection • full power 250w: 30w per port • full protection otp, ocp, ovp • 1, 4, 8, 16, 24 ports optional Security cctv camera 1pcs/box

Industrial poe injector Pt-pse106gro wide-temperature midspan 30w Standard 1) 55vdc, 30w output power 2) passed cttl signal and poe 6kv (10/700us) testing 3) temperature -40?-65? 1. Single-port 30w midspan Pt-pse106gro is a single-port solution for remote powering of current as well as emerging high power applications. It outputs 55vdc/550ma, 30watts. 2. Wide-temperature design Pt-pse106gro work temperature -40?-65? for industrial environment or high temperature environment. 3. Lightning protection Provide 8 lines power & signal 6kv(10/700us) lightning-protection for pd escape from lightning strikes. 4. Easy install Pt-pse106gro with good adaptability to the temperature, there are four mounting holes to fixed to the wall by self-tapping screw or tied to shelf. 1. Input voltage: 100vac~240vac, 50hz~60hz 2. Output max power: 30w 3. Output current: 550ma 4. Data speed: 10/100/1000mbps 5. Output voltage regulation precision: 55vdc±5% 6. Loading: 55vdc±1% 7. Working temperature range: -40?~+65? 8. Size & weight Size: 193mm*85mm*41mm Weight: 380g Standard - ieee802.3 10base-t ethernet - ieee802.3u 100base-tx fast ethernet - ieee802.3ab 1000base-t gigabit ethernet - support for ieee802.3af/at pd - rohs compliant - weee compliant, ce/fcc - fcc part 15, class b - en 55022 class b - mtbf: 100, 000 h.@25? Poe power output - ethernet pin: 4/5(+), 7/8(-) - data speed: 10/100/1000mbps - output voltage: 55v - output current: 550ma - input ac voltage: 100-240vac - input ac current: 1.0a@100-240vac - ac hz: 50-60hz Size & weight - size: 193mm*85mm*41mm - weight: 380g

FEATURES +/- 48V DC input; 24V Passive PoE output Provide power and access to device at the same time Power-in/Power-out LED display Easy-Positioning design, simple installation for vertical or horizontal direction Dual (DC-in/battery) input power redundancy OVERVIEW PSE151DG is a 48V to 24V Gigabit PoE injector that it is flexible and convenient to be powered by a DC connector and Terminal block as redundant dual-Input design.

Industrial Gigabit PoE Injector (midspan) DC INPUT/ DIN RAIL MOUNT Data Rate: 10M/100M/1000M Input Voltage: 12VDC to 57VDC (DIN-POE4); 40VDC to 57VDC (DIN-POE4D) Maximum PoE output: 35W per port (DIN-POE4D); Current limited 1A/port (DIN-POE4) Compliance: 802.3af/at (DIN-POE4D) PoE protection over-current protection LEDs: Green-Power ready, Off-No power apply Operating temperature: -40~ +75 Storage temperature: -40~+85Operation humidity: 90% relative humidity, non-condensing Dimension: 125mm(H) x46mm(W) x102mm(D) DIN RAIL Mountable Operating Voltage: Data 5V Clamping Voltage: Data 16.5V(@IPP -5A, tp -8/20µs, I/O pin to GNDµ Peak Pulse Current: 20A (tp-8/20µs) Pin Protected: All 8 pin protected Max Shut Capacitance:

Application: IP Telephones, Wireless Network Access Points, Blue Tooth Access Point IP Print Servers, Security Camera, etc. Item: 12v 24v 15v 0.5A 1A 2A poe adapter Input Rated Voltage : 100Vac~240Vac Input Frequency Range: 47Hz~63Hz Input Inrush Current: 1.3A max Efficiency: 87%(MIN)at Rated Voltage, level VI Ripple and Noise:

FEATURES Compliant with IEEE802.3bt 90W output power on 4-pairs Data Rate: 10/100/1000Mbps Full protection for OCP, OLP, and OVP LED indication for power and POE status 2-Pair PDs received power on 2-Pairs Automatic Detection and Protection of Non standard Ethernet Terminals

Application: IP Telephones, Wireless Network Access Points, Blue Tooth Access Point IP Print Servers, Security Camera, etc. Item: 48V 2A PoE Injector Input Rated Voltage : 100Vac~240Vac Input Frequency Range: 47Hz~63Hz Input Inrush Current: 1.3A max Efficiency: 87%(MIN)at Rated Voltage, level VI Ripple and Noise:

PT-PSE100GFN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32 amp. PoE Injector manufacturer:Creative Lianjie Network Technology Designed for the AT powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at devices. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor use installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We are PoE Injector supplier and more information you can view here Parameter PoE Injector for door locks Description Key Features 1. Output: 48Vdc, 320mA, 15.4W 2. Transmission Rate: 10/100/1000Mbps 3. Power Pin: 4/5(+),7/8(-) Part Number PT-PSE100GFN Ports   condition LAN Port*1, AC Input   Port*1, PoE Output Port*1 Regulatory   Compliance  IEEE802.3af  RoHS Compliance  WEEE Compliance Pass Through   Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 48Vdc User Port Power: 30W Guaranteen Input Input   Voltage: 100-240Vac Frequency: 50/60Hz Typ Working   Environment Operating   Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case: plastic Color: Black Mounting:Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 135mmX 95mmX 35.4mm  Weight: 400gï¼?0.88lbï¼? LED Indicator Power   Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety   Approvals CE,   FCC

PT-PSE100G-24 is a single port midspan Injector with 2 Pair PoE up to 26 watts of power at 24 VDC at 1100 amp. Designed for the outdoor PoE Injector, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 0/100/1000Mbps of data rates. Fully comply with IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with wall-mounted. It operates with a wide input voltage of 100-240 VAC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). The POE Injector are Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. We are PoE Injector supplier and more information you can view here We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. high quality PoE Injector Specifications Parameter Description Key Features 24VDC   output voltage     Wall-mounted Part Number PT-PSE100G-24 Ports   condition LAN Port*1, AC Input   Port*1, PoE Output Port*1 Regulatory   Compliance     IEEE802.3af     RoHS Compliance     WEEE Compliance Pass Through   Data Rates 10/100/1000 Mbps Output Pin   Assignment and Polarity:     4/5 (+), 7/8 ()     Output Power Voltage: 24Vdc     User Port Power: 26W Guaranteen Input AC   Input Voltage: 100 to 240 Vac     Frequency: 47 to 63Hz (50/60Hz Typ.)     DC Input Current: 1A Working   Environment Operating   Temperature: 0 to 40     Operating Humidity: 20% to 80%, non-condensation     Storage Temperature: -20 to 70     Storage Humidity: 10% to 90%, non-condensation     Operating Altitude: up to 2000meters PoE Surge   Protection Protected   line: 1,2,3,4,5,6,7,8     Common mode surge protection(10/700us): 6KV      Differential mode surge protection (10/700us): 1.5KV  AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV     Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case:   Plastic     Color: Black     Mounting: Wall-mounted     IP Rated: IP40     Connectors: Shielded RJ-45*2     Size: 134mmX 56mmX 33mm      Weight: 150gï¼?5.3ozï¼? LED Indicator Power   Indicator : Green     PoE Load Indicator : Green Warranty 2 year Safety   Approvals CE/FCC

POE Injector For IOT Application PT-PSE10GN PT-PSE10GN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32amp. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. waterproof POE Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices. outdoor PoE Injector Enclosed in an IP40 fire retardant plastic case, designed for plug and play indoor use with compact structure. outdoor PoE Injector operates with a wide input voltage of 100-240Vac 0.5A, The effective distance is 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) Parameter Description Key Features Single-port        Wall-mounted poe Part Number PT-PSE10GN Ports   condition LAN Port*1,  PoE Output Port*1 Regulatory   Compliance     IEEE802.3af     RoHS Compliance     WEEE Compliance Pass Through   Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity:     4/5 (+), 7/8 ()     Output Power Voltage:48Vdc     User Port Power: 15.4W Guaranteen Input Input   Voltage:100-240Vac     Frequency:50/60Hz Typ          Working   Environment Operating   Temperature: 0 to 40     Operating Humidity: 20% to 80%, non-condensation     Storage Temperature: -20 to 70     Storage Humidity: 10% to 90%, non-condensation     Operating Altitude: up to 2000meters AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV     Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case: plastic     Color: White     Mounting:      IP Rated: IP40     Connectors: Shielded RJ-45*2     Size: 83X 51X 69mm     Weight: 380g(0.83lb) LED Indicator     Power Indicator: Red     PoE Load Indicator: Green Warranty 2 year Safety   Approvals CE,   FCC

60W PoE Injector PT-PSE104GB-60-10 PT-PSE104GB-60-10 is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps/10GBps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We are PoE supplier Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. 60W PoE Injector operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Outdoor POE Injector Specifications Parameter waterproof POE Description Key Features Wall-mounted Part Number PT-PSE104GB-60-10 Ports   condition LAN Port*1, AC Input   Port*1, PoE Output Port*1 Regulatory   Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through   Data Rates 10GBit/s Output Pin   Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input AC   Input Voltage: 100-240 Vac Frequency: 47 to 63Hz (50/60Hz Typ.) AC Input Current:1.5A Working   Environment Operating   Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge   Protection Protected   line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV  Differential mode surge protection (10/700us): 1.5KV  AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case:   Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 145.51mm X 65.8mm X 33.5mm Weight: 255gï¼?8.99ozï¼? LED Indicator Power   Indicator : Green PoE Load Indicator :  Green   @â?¤30W                                   Blue      @ï¼?30Wâ?¤60W Warranty 2 year Safety   Approvals cUL/UL/FCC/CE