2023 Trek Fuel Ex 9 9 Xx1 Axs Gen 6 Suppliers and Manufacturers

TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL (1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan 1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along with their Tank Storage Agreement "TSA". 2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial invoice to the seller along with an Acceptance Letter of the sales and purchase procedure. 3. Seller verifies the buyerâ??s storage facility and their Tank Storage Agreement (TSA) with the port authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all parties only if buyerâ??s TSA is engaged, not active or cannot be verified with the local port authority). 4. Seller issues all POP documents below to the buyer upon a successful verification and approval of the buyer TSA or after receiving the TTIA fully signed by all parties: a. Injection Report. b. Product Passport. c. 24 Hours SGS Report. d. Product Certificate of Origin. e. Tank Storage Receipt (TSR). f. Authorization to sell and collect. g. Unconditional Dip-Test Authorization. h. Product Title Holder Transfer Agreement. i. NCNDA/IMFPA. 5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyerâ??s expense. 6. Upon successful verification of POP or Dip Test in the sellerâ??s tank, buyer provides Tank Storage Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by buyer storage facility and then injects the product into buyerâ??s tanks. 7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder & Ownership of the product to the Buyer. 8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to Buyer for processing. 9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts according to the signed NCNDA/IMFPA.

***QUOTATION*** Date: 19/12/2023 Product name: PICKLED GHERKINS IN DRUM Original of place: Vietnam 1/ SPECIFICATION - Size 4-7 cm, 3-6 cm, 6-9 cm - Acidity (%): 3.2 �± 0.2 - Salt (%): 4.0 �± 0.2 - SO 2 (ppm): 125 �± 25 - Ca (ppm): 1000 �± 200 - pH < 2.8 2/ PACKING - BY DRUM HPDE NW: 180 kgs/ drum; 80 drums/ Cont 20 FT is total 14,400 kgs Drained weight: 180 kgs Net weight: 270 kgs Gross weight: 280 kgs

(1). Potassium hydroxide is widely used in the production of potassium carbonate including KHCO3, potassium soaps,detergents, fine cosmetic, potassium hydrogen phosphate, potassium permanganate, medical intermediate, liquid fertilizers, synthetic rubber, ABS resin, natural rubber emulsion, paper agent, fermentation, cresol, de-sulfuration in petroleum refining, bio-fuel and alkaline battery. (2). Potassium hydroxide can be used as a desiccant, sorbent, used for preparing potassium soap, oxalic acid and various salt, also used in electroplating, carving and so on. (3). Potassium hydroxide can be used for the production of potassium soap,alkaline battery, cosmetics in light industry (such as cream, cream and shampoo). (4). In the dye industry, Potassium hydroxide can be used for the production of vat dyes, such as vat blue RSN, etc.. (5). In the electrochemical industry, Potassium hydroxide can be used for electroplating, engraving, etc.. (6). In the textile industry, Potassium hydroxide can be used for printing and dyeing, bleaching and mercerizing, and used as the main raw material for synthetic fiber, polyester fiber manufacturing. (7). In addition, it is also used in metallurgical heating agent and leather fat, etc.. (8). Potassium hydroxide can be used as analytical reagent, reagent, carbon dioxide and water absorbent, and also used in pharmaceutical industry; (9). Potassium hydroxide can be used as the PH value of acid and alkali neutralization solution. (10). Potassium hydroxide can be used as the basic chemical reagent, carbon dioxide absorbent. saponification agents.

ProductASME 165 plate flanges BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating47 based on 52 reviews priceStart from 20 USD RFP India is a wellknown manufacturer and supplier of Plate Flanges in the steel market industry worldwide Plate flanges are most commonly used in fuel and water pipelines where two flange plates are locked up together with a gasket in the central point of them The flange plate will now have bolt holes all in the region of outer limits and will be used to make joints tees and junctions Meanwhile there are several benefits of Plate Flanges such as it is free from any shortcomings has an unmitigated service life has finer grain establishment as measured up to forged or cast items reduction of the customary maintenance expenditures and so on RANGE 15 NB to 60 1500NB in 150 LBS 300 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS ASA 150 ASA 300 PN 6101625 4064100160 ETC available with NACE MR 0175 SIZE 15NB to 60 1500NB CLASS PRESSURE Class Pressure 150 300 600 900 1500 2500 PN6 PN10 PN16 PN25 PN40 PN64 DIMENSION B165 BS4504 EN1092 B1636 B1647 B1648 MSS SP44 STD STD ANSI Flanges ASME Flanges DIN Flanges EN Flanges BS Flanges API JIS NACE etc FEATURES Dimensional accuracy Corrosion resistance High efficiency Excellent finish Durable Stainless Steel Plate Flanges Standard  ASTM ASME ASA 182 Grade  F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Plate Flanges Standard  ASTM ASME ASA 182 Grade  F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Plate Flanges Standard  ASTM B247 B361 Grade  2024 6061 6063 6101 7075 Titanium Plate Flanges Standard  ASTM B381 Grade  Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Plate Flanges Standard  ASTM A 105A694 A350 LF3A350 LF2 Grade  F42465256606570 Low Temperature Carbon Steel Plate Flanges Standard  ASTM A 350 LF2 A350 LF3 Alloy Steel Plate Flanges Standard  ASTM A182 Grade  F1F5F9F11F22F91 Copper Alloy Plate Flanges Standard  ASTM ASME SB 61 62 151 152 Grade  UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Plate Flanges Standard  ASTM ASME SB 564 160 472 Nickel 200 UNS N02200    Nickel 201 UNS N02201    Monel 400 UNS N04400 Monel K500 UNS N05500    Inconel K600 UNS N06600    Inconel 601 UNS N06601 Inconel 625 UNS N06625    Inconel 800 UNS N08800    Inconel 800H UNS N08810 Inconel 825 UNS N08825    Hastelloy C276 UNS N10276    Alloy 20 UNS N08020 Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Plate Flanges SS 310 310S Plate Flanges Duplex Steel UNS S31803 Plate Flanges Stainless Steel 304 304L Plate Flanges Duplex Steel Plate Flanges Stainless Steel 316 316L Plate Flanges Duplex Steel UNS S32205 Plate Flanges Stailess Steel 321 321H Plate Flanges Super Duplex UNS S32750 Plate Flanges Monel 400 Plate F

Item Parameters Specified Value 1. Appearance Clear, transparent, without water and a) Visual suspended particles at ambient temperature . b) Color (Saybolt Scale Points) Not specified, analysis to be required c) Total sediments, mg/dm max - 1.0 2. Acidity, mg KOH/g, max - 0.10 3. Aromatic hydrocarbons, vol. %, max - 25.0 4. Mercaptan sulphur, wt. %, max - 0.0030 Or Doctor test negative 5. Total sulphur, wt. %, max - 0.25 6. Distillation, C 10% distillated at temperature, C not higher than 205.0 50% distillated at temperature, C Not specified, analysis to be required 90% distillated at temperature, C not higher than 300.0 residue, %, max 1.5 losses, %, max 1.5 7. Flash point, C, not lower than - 38.0 8. Density at 15 C, kg/m - 775.0-840.0 9. Pour point, C, not higher than - Minus 47.0 10. Kinematic Viscosity at minus 20C, - 8.000 m /s, max 11. Net calorific value, MJ/kg, min - 42.80 12. Smoke point, mm, min - 25.0 or with naphthalene hydrocarbons - 19.0 vol.% = max. 3%,min. 13. Copper corrosion test at 100C, during 2 h �?�± 5 min, - 1 during 2 h �± 5 min, class, max 14. Thermal oxidation stability - 3.3 (25.0) determined by JFTOT at Temperature not lower than 260 �?�°C, - 3 during 2.5 h Pressure drop at filter, Without any deposits of abnormal or kPa (mm Hg), max Deposits on tube, less than peacock (iridescence) color 15. Actual gum concentration, - 7 mg/100 c , max. 16. Interaction with water : a) state of interface, points, max - 1b b) light transmission measurement - 85 by micro separator, min. without antistatic additive 17. Specific conductivity, pSm/m, - 10 for fuel without antistatic additive, max. 18. Lubricity : wear scar diameter, mm, max - 0.85

Jet A1 - 12 Month CIF Contract Production Procedures: Product: A1 Jet Fuel Pricing: -$7 NWE- (European Platts) Origin: Kazakhstan - (We own our own refinery) Delivery: CIF to any safe world port MOQ: 1 Million Barrels per Month Refinery CIF Transaction Procedures: 1. Buyer issues LOI/ICPO. 2. Seller issues Draft Sales Purchase Agreement Contract and for Buyer's review and signing. 3. Buyer and Seller sign Sales Purchase Agreement Contract and the Buyer will send Draft Banking instrument verbiage for review. 4. Seller sends partial POP to Buyer via email: (a) Statement of Availability of Product (b) Seller's Irrevocable Commitment to Supply (c) Product Passport (d) Certificate of Product Origin (e) ATSC (Authorization to Sell and Collect) 5. Buyer sends the Final Draft of LC/SBLC for Sellers approval. 6. Buyer's Bank Swift the irrevocable, operative, transferable, divisible, confirmed and fully Funded Documentary Letter of Credit IRDLC to the Seller's bank. 7. Seller sends the full POP and 2% Performance Bond to Buyer's bank. 8. Shipment commences as scheduled in the contract and upon arrival of the cargo at the discharge port and after SGS/Q&Q, or equivalent inspection, immediately Buyer's Bank releases the Total Value of the Shipping to Seller's Bank within 48 hours (two banking days) by MT103 against shipping documents specified. 9. Seller pays all intermediaries involved in the transaction as per IMFPA within 48 hours. Notes: 1) Seller will allow transferable sblc/dlc and non-transferable sblc/dlc as a finance instrument. 2) Buyer must submit Loi/icpo to start engagement with our seller. 3) No brokers please. Only direct buyers or direct buyer reps. 4) Please Note: I'm direct to the seller of a billion dollar global trading company who specializes in gas and grains trading. We have impeccable due diligence and a successful 40 year track record. (We have our own refinery in Kazakhstan) Please contact me directly on whatsapp to submit: Jeff Moynihan 702-277-0993

Key Specifications/ Special Features: Specification item value Application Heating System Diameter 8-9 mm Shape Briquette Length 2-3 cm Calory (J) 4100 Moisture (%) 6 Place of Origin China Guangdong Brand Name Yongbang/OEM Model Number Ash Content (%) 1.6 Wood pellets Bio Fuel Wood Type Oak Raw material 100% Wood Sawdust Package 25kg/bag, 1ton/bag MOQ 10 Tons Quality 100% Wood Pellet Bio Fuels Usage Biomass Energy Industry Advantages Green Energy Savings Function Fuel- Burning

1. PRODUCT DESCRIPTION: Fresh apple 2. VARIETIES: - Red colour types: Royal Gala, Gala must, Golden, Red Delicious, Red chief, Red prince, Golden, Pink lady, Fuji - Green & yellow colour types: Golden delicious, Granny smith 3. CALIBERS: From 90 to 150 4. ORIGIN: Spain, Poland, Ukraine, Turkey 5. BRAND: Producer or private according production possibilities 6. PACKAGE FORMAT: Try with 4 - 8 pieces; cartons of 4, 6, 8, 12, 18 kg 7. LOADING FORMATS: Grouped cargo per pallets by cooled truck or full loaded cargo by cooled truck (Up to 33 pallets - 22.500 KG of goods) and reefer container (Up to 21 pallets 25.000 kg of goods) Most common reefer format: 1.162 cartons (21 pallets) of 18 kg fit in 40�´ cooled container for a total of 20.916 kg. of goods 8. DELIVERY DELAY: Immediately after receipt of purchase confirmation and fulfilment of payment terms agreed in case of EU orders and within 10 15 days in case export orders abroad EU space 9. DELIVERY CONDITIONS: EX-WAREHOUSE, FOB, CIF, DDP 10. EXPORT DOCUMENTATION: Terrestrial waybill (EU operations) or Bill of lading (B/L), Commercial invoice, Packing list, Origin certificate (Non-EU operations), Sanitary and/or phytosanitary certificate, Quality and/or quantity certificate made by some prime surveyor (Cost not included in quotation) 11. PAYMENT TERMS: Prepayment of 30% - 50% of order value and balance against presentation of shipment documentation; Confirmed letter of credit payable at 60 days of shipment date; deferred payment at 60 days of shipment date in case that�´s granted a commercial risk coverage by a prime rated insurer like COFACE or similar

1. DESCRIPTION OF PRODUCT: Sugar for human consumption 2. TYPES: White refined sugar (ICUMSA 45), White crystal sugar (ICUMSA 100 - 150 & EU1 - EU2), Brown raw sugar (ICUMSA 600 - 1200) 3. ORIGIN: Europe (Beet based production: EU1 - EU2), Brazil (Cane based production: ICUMSA 45 - 1200), and India (Cane based production: ICUMSA 150 - 1200) 4. SPECIFICATIONS: According each sugar type 5. BRAND: Producer or private according factory possibilities 6. PACKAGE PRESENTATIONS: 1 kg, 2 kg, 5 kg, 10 kg, 15 kg, 20 kg, 25 kg, 50 kg, and 1.000 kg of net weight packed in paper (1kg to 50 kg bags) or polypropilene bag (1.000 kg bags) 7. LOADING FORMAT: Groupe cargo by pallets or full loaded container or truck containing 24 & 25 MT of product 8. DELIVERY DELAY: Immediately after receipt of purchase confirmation and fulfilment of payment terms agreed in case of EU orders and within 10 �¢?? 15 days in case export orders abroad EU space 9. DELIVERY CONDITIONS: EX-WAREHOUSE, FOB, CIF, DDP 10. PRICE: According current market rates 11. EXPORT DOCUMENTATION: Terrestrial waybill (EU operations) or Bill of lading (B/L), Commercial invoice, Packing list, Origin certificate (Non-EU operations), Sanitary and/or phytosanitary certificate, Quality and/or quantity certificate made by some prime surveyor (Cost not included in quotation) 12. PAYMEN TERMS: Prepayment of 30% - 50% of order value and balance against presentation of shipment documentation; Confirmed letter of credit payable at 60 days of shipment date; deferred payment at 60 days of shipment date in case that buyer count with a good commercial risk rating

1. PRODUCT DESCRIPTION: Fresh table grape 2. VARIETIES: - Red types: Red Globe, Crimson (Seedlees), Tompson (Seedless), Ruby (Seedlees), Autumn Royal (Seedless), Cardinal, Napoleon - White types: Aledo, Italia, Rosetti, Dominga, Data Maria, Vinalopo 3. ORIGIN: Spain & Europe (Italy, Portugal, Greece) 4. CALIBERS (Girth): 23 - 24 5. AVERAGE BRIX RATE: 17 6. BRAND: Producer or private according to production possibilities 7. PACKAGE FORMAT: 4,5 & 5,0 & 7,0 kg net weight fit on light wooden box with conservator leave and enveloped by plastic bag (See package example nearby) 8. LOADING: Grouped cooled cargo by pallets (144 boxes in case of Europe pallet and 180 boxes in case of American pallet) or full loaded cargo by cooled truck containing 33 pallets or 40�´ cooled container containing 21 pallets 40container loading format: 3.744 boxes of 5 kg (21 pallets) for a total net weight of 18.720 kg of goods 9. DELIVERY DELAY: Within 15 - 20 days after receipt of purchase confirmation and payment agreed 10. DELIVERY CONDITIONS: EX-WAREHOUSE & FOB & CFR 11. PRICE: According current market rates 12. EXPORT DOCUMENTATION: a. Bill of lading (B/L) b. Commercial invoice c. Packing list d. Origin certificate e. Sanitary and/or phytosanitary certificate f. Quality and/or quantity certificate made by some prime surveyor (Cost not included in quotation) 13. PAYMEN TERMS: a) Prepayment of 30% - 50% of order value and balance against presentation of shipment documentation) b) Irrevocable/confirmed LC payable at 60 days of shipment date c) Deferred payment at 60 days of shipment date in case that�´s granted a commercial risk coverage for a prime rated insurer 14. IMPORTANT NOTE: Rates quoted have a limited validity so must request update of them before confirmation of any purchase order