20202022 Apple iMac 5K 27 3.6GHz 10-Core i9 128GB RAM 1TB SSD 5500Xt Shipping We pack carefully and ship quickly! We ship with the cheapest shipping companies using FedEx, DHL, and Japan Post. We deliver the best products from Japan with the best packing techniques. Notes Import duties, taxes, and charges are not included in the item price or shipping charges. Please check with customs before bidding or purchasing for these additional costs. Customs duties are the buyer's responsibility. Additional shipping charges may be charged for remote areas.
An apple is an edible fruit produced by an apple tree. Apple trees are cultivated worldwide and are the most widely grown species in the genus Malus. The tree originated in Central Asia, where its wild ancestor, Malus sieversii, is still found today. Apples are an incredibly nutritious fruit that offers multiple health benefits. They're rich in fiber and antioxidants. Eating them is linked to a lower risk of many chronic conditions, including diabetes, heart disease, and cancer. Apples may also promote weight loss and improve gut and brain health. The apple is a pome (fleshy) fruit, in which the ripened ovary and surrounding tissue both become fleshy and edible. When harvested, apples are usually roundish, 5â??10 cm (2â??4 inches) in diameter, and some shade of red, green, or yellow in colour; they vary in size, shape, and acidity depending on the variety. Apples, pears, nashi and quince are pome fruits, grown from spring blossom and harvested from late summer through to late autumn. Ten attributes were selected to describe the apple characteristics: fruitiness, acidity, sweetness, juiciness, crispness, hardness, toughness, mealiness, vegetativeness, and astringency. apple, (Malus domestica), fruit of the domesticated tree Malus domestica (family Rosaceae), one of the most widely cultivated tree fruits. The apple is a pome (fleshy) fruit, in which the ripened ovary and surrounding tissue both become fleshy and edible. In Walter Isaacson's biography of Steve Jobs, Jobs reveals: On the naming of Apple, he said he was â??on one of my fruitarian diets.â?? He said he had just come back from an apple farm, and thought the name sounded â??fun, spirited and not intimidating.â?? An apple is an edible fruit produced by an apple tree (Malus domestica). Apple trees are cultivated worldwide and are the most widely grown species in the genus Malus. Most apples are a little sweet and a little tart, but neither characteristic overpowers the other. Some types of these apples will taste mild, while others will have stand-out flavor. As usually, that depends on the weather and harvest conditions. The rotten apple injures its neighbours. 2 One rotten apple spoils the whole barrel. 3 Don't throw away the apple because of the core. 4 The apple never falls far from the tree. To a botanist, a fruit is an entity that develops from the fertilized ovary of a flower. This means that tomatoes, squash, pumpkins, cucumbers, peppers, eggplants, corn kernels, and bean and pea pods are all fruits; so are apples, pears, peaches, apricots, melons and mangos
(Product Category)" - Dried Fruits (Product Name)" - Dried Apple Keyword 1 - apple Keyword 2 - dried apple Keyword 3 - apple snack (Price per unit) : USD 1-99 Unit - 131.25 100 - 999 Unit - 124.6875 1000 - 9999 Unit - 122.0625 1000 - 9999 Unit - 120.75 (Unit) - Cartons (1cartons = 10 KG) (MOQ: Minimum Order Quantity) - 10 Cartons Lead Time - 30 Days Size - 27 x 33.5 x 23 cm Weight - 10 KG Certificate (If Have) - HACCP, GMP Product Description e.g. Size, Color, How to use" - Dried Natural Apple from Thailand Additional Information e.g. Usage, Benefit"- Healthy, Munchy
1.Green Apple HR 2.Strawberry 3.Black Grape 4.Coconut J 5.Grapefruit 6.Orange HR Fruity 7.Mandarin Acer 8.Pineapple 9.Bananas 10.Mango J 11.Watermelon 12.Peach 13.Red Rose 14.Cherry 15.Leelawadee Flower 16.Lotus Flower 17.Lemongrass 18.Papaya 19.Honey 20.Rose Apple 21.Bergamot 22.Coffee 22.Melon or Cantaloupe 24.MPB II 25.Aqua Marine 26.Tangy Lime OD 27.Lemon Classic 28.Fresh Fragrance:- 29.Fresh Flower
1.High adhesion 2.More sticky on digital laminating 3.Environmental frinedly 4.Efficient and energy-saving 5.SGS Feature Moisture proof Hardness Soft Processing type Multiple extrusion Transparency Transparent Place of origin Beijing, china (mainland) Model number Digital thermal lamination film Name Digital thermal lamination film Thickness 27/30/33 Temperature 85-100/100-110 Delivery time Within 7-15 days upon receipt of payment Application Xerox dc series hp indigo series, canon digital printer and so on Minimum order quantity 1 metric ton/metric tons Width 300/320/457/635/785/880(upon demands) Length 300-6000m(10% allowance) Paper core 25.4(1inch)/58(2.25inch)/76mm(3inch) Material Pet
Utp cat5e: Product description: Reference standard: ul444, tia/eia-568a Bare solid copper conductor Rohs complied pvc, pe or lsoh jacket Complies to tia/eia-568b&iso/iec 11801 Application: 100 base-tx, 100 base-t4, 100vg-anylan, 1000base-t, atm Cable construction: Item no.: 1 2 3 4 5 Conductor dimension(mm): 0. 51 0. 51 0. 51 0. 50 0. 51 Core dimension (mm): 0. 96 0. 96 0. 95 0. 91 0. 92 No. Of pairs: 4 4 4 4 4 Nom. Od(mm): 5. 2 6. 0 6. 5 6. 3 5. 3 Electrical characteristics: Frequency(mhz): 1 10 62. 5 100 155 200 350 Attenuation(db/100m): 2. 0 6. 5 17. 0 22. 0 28. 1 32. 4 44. 9 Impedance(ohm): 100 100 100 100 100 100 100 Return loss(db): 20 25 22 20 19 19 17 Next(db/100m): 65. 3 53. 3 38. 4 35. 3 33. 3 31. 0 27. 0 Elfext: (db/100m): 63. 8 43. 8 27. 8 23. 8 20. 0 18. 0 13. 0 Ps next(db/100m): 62. 3 47. 3 35. 4 32. 3 29. 0 28. 0 24. 0 Ps elfext: (db/100m): 60. 8 40. 8 24. 8 20. 8 17. 0 15. 0 10. 0 Propagation speed(m/s): 0. 65c 0. 65c 0. 65c 0. 65c 0. 65c 0. 65c 0. 65c Packing: 1) packing lengths: 100m/roll, 200m/roll, 305m/roll, 100yard/roll, 200yard/roll, 300yard/roll Other lengths available according to client's request. 2) inner packing: wooden reel, plastic reel, and paper reel available. 3) outer packing: carton box, pull out box, pallet available. 4) other packing available according to client's request. Product origin: china Brand name: hua di or oem Productivity: 200, 000km/year Price terms: fob, cif, c&f Payment terms: t/t, l/c
DC MIG welder: This range of easy to used Mig welding offer quality performance for the advanced. Robust but portable. There fan cooled welders are also available as dual purpose units offering quality welding indoors or out. include full accessories, such mig torch. hammer/brush. earth clamp. Mask. welding rod and so on, With CE approved. Can be common used fluxed cored wire and solid wire except MIG-100 and MIG-130. Model MIG-100 MIG-105 MIG-130 MIG-135 MIG-150 MIG-175 MIG-195 Rated input voltage(V) 1 PH 230V 1 PH 230V 1 PH 230V 1 PH 230V 1 PH 230V 1 PH 230V 1 PH 230V Current Range(A) 55-90 35-90 55-120 40-120 40-140 40-160 40-180 Max current out put(DC) 90A@10% 90A@10% 120A@10% 120A@10% 140A@10% 160A@10% 180A@10% Rated input capacity (KVA) 2.4 3 3.5 4.7 5.2 6.3 7.5 Usable welding wire 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 0.6-1.0 0.6-1.0 Steel welding diameter 0.8 0.8 0.8 0.8 0.8 0.8-1.0 0.8-1.0 Aluminum welding diameter 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 Flux welding wire diametre 0.8 0.8 1 1 1 1.2 1.2 Insulation class H H H H H H H Weitht(KG) 16 25 18 27 33 36 38 Dimension(cm) 54X26.5X41 54X26.5X41 54X26.5X41 54X26.5X41 60X35.5X39.5 60X35.5X39.5 60X35.5X39.5 Wooden case
Application areas: Measuring-level current transformer used in power system, transformer used on precision measuring instruments (such as watt-hour meter). According to the requirements of different measurement accuracy of the transformer, different soft magnetic materials can be chosen as iron core materials. The higher the permeability of the iron core is, the smaller the measurement error of the transformer is, hence the accuracy is higher. At present, the most common iron core material is cold-rolled silicon steel sheet, followed by Permalloy and nano-crystalline glass alloy. In recent years, demands for transformers with high-precision level (such as class 0.2, class 0.2Sand class0.5S) increased rapidly. When small ratio, low ampere turns are required or the iron core is restricted because of the small volume, the cold-rolled silicon steel often fails to meet the accuracy requirements. Although the Permalloy iron cores with high permeability can meet the required precision, its price is very high. However use of nano-crystalline alloy iron cores can both meet the accuracy requirements and be produced at lower cost than the Permalloy. Therefore, the demand of measuring level current transformer iron core made of nano-crystalline alloy rapidly increased domestically. The typical parameters comparison of the common soft magnetic materials used for current transformer iron cores: Basic parameters Nano-crystalline iron core Permalloy (1J85) iron core Silicon steel iron core Saturation magnetic flux density (Bs) 1.25T 0.75T 2.03T Initial permeability (¦Ì0) 8¡«12, 104 5¡«8, 104 103 Maximum permeability (¦Ìm) 60, 104 60, 104 4, 104 Curie Temperature (¡æ) 570 400 740 Density (g/cm3) 7.25 8.75 7.65 Lamination factor 0.7 0.9 0.95 Thickness (mm) 0.03 0.15 0.3 Features: It is made of the iron-based nano-crystalline strips with a moderate saturation magnetic induction, high permeability and low loss, which can effectively reduce ratio difference angle difference of the transformer. The saturation magnetic induction Bs of nano-crystalline alloy is between the silicon steel and Permalloy. The lower the Bs value is, the lower the security coefficient of the instrument is. When the system failure occurs and large current through the current transformer results therefore, the iron core is more easily filled, and the secondary current no longer increases in proportion, as can assure that the secondary instruments are well protected and not to be damaged. Permeability of nano-crystalline alloy is close to Permalloy and a magnitude higher than silicon steel, so it is suitable to be made as high-precision transformer iron core. The density and lamination coefficient of nano-crystalline is lower than that of Permalloy, under the condition of the same size and similar performance of the two. In this case the nano-crystalline iron core is 1/4 lighter in weight, and 1/3 lower in the manufacturing cost. In addition, the linear range of nano-crystalline alloy is wider than that of Permalloy .It can work for a long time at temperature of -55 ~ 130 ¡æ ,with a good temperature stability. Specifications a. Rectangular core: (mm) Iron Core Size(mm) (mm) The case size(mm) Weight of the iron Core (kg per piece) Turns Ratio N1: N2 Excitation current(mA) Excitation voltage(mV) 55*97/77*119, 25 50*92/82*114, 30 0.53 1:1 25 0.45 95 2.2 1500 53 70*90/100*120, 30 65*85/105*125, 36 0.81 1:1 200 15 1:1 500 50 75*95/105*125, 25 70*90/110*130, 30 0.7 1:1 70 2 1:1 175 8 80*95/120*135, 25 75*90/125*140, 30 1.09 1:1 80 1.7 1:1 600 41 90*90/160*160, 30 85*85/165*165, 36 2.4 1:1 100 6 1:1 500 100 1:1 1000 140 135*135/260*260, 10 130*130/265*265, 16 2.3 1:1 100 1.5 1:1 500 32 82*602/138*658, 45 75*595/145*665, 55 8.8 1:1 100 1.2 1:1 1000 45 1:1 2000 120 Note: Iron cores of other specifications can be provided upon request of users b. Ring core: No. The iron Core Size Case size(mm) The weight of the iron core (kg per piece) Turns ratio N1: N2 is 1:1; Input current (mA), 50Hz; Output voltage (mV) 1 1105/1165, 15 1095/1175, 25 8.35 Excitation current 450 1200 2000 Excitation voltage 0.59 2.36 5.28 2 415/520, 15 409/526, 23 6.08 Excitation current 50 250 700 Excitation voltage 0.4 3 11 3 305/490, 15 299/496, 23 9.1 Excitation current 350 900 ¡¡ Excitation voltage 5 20 ¡¡ 4 315/395, 35 309/401, 43 8.2 Excitation current 120 400 ¡¡ Excitation voltage 3 11 ¡¡ 5 198/248, 30 192/254, 37 2.76 Excitation current 100 200 500 1000 Excitation voltage 2 6 35 90 6 198/248, 20 192/254, 27 1.84 Excitation current 100 200 500 1000 Excitation voltage 1.5 3.5 25 60 7 155/200, 30 150/205, 36 2 Excitation current 100 190 1000 Excitation voltage 2.5 9.5 80 8 140/180, 30 135/185, 36 1.58 Excitation current 40 80 240 Excitation voltage 1 2.9 15 9 130/190, 30 125/195, 36 2.38 Excitation current 40 80 240 Excitation voltage 1.2 3.8 17 10 100/140, 30 95/145, 36 1.19 Excitation current 30 120 500 Excitation voltage 0.85 6.8 68 11 90/130, 30 85/135, 36 1.09 Excitation current 30 120 500 Excitation voltage 0.7 6 55 12 90/125, 25 85/130, 31 0.78 Excitation current 30 120 500 Excitation voltage 0.9 7 70 13 80/120, 30 75/125, 36 0.99 Excitation current 200 500 ¡¡ Excitation voltage 20 65 ¡¡ 14 85/115, 30 80/120, 36 0.74 Excitation current 30 120 500 Excitation voltage 0.7 6.5 55 15 85/125, 20 80/130, 26 0.7 Excitation current 30 120 500 Excitation voltage 0.62 5.5 50. wooden case+carton box.
H41 Insulation Pressboard-made from Arauco Pulp Production Description: 1) Pre-compressed Pressboard, with Quality Standard: IEC60641-3-1:1992/GB/T 19264.3-2003 2) Thickness: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm 3) Material: 100% unbleached sulfate pulp imported from Canada, Russia. 4) High density, high mechanical strength, high electric strength and low compression index. 5) 4400mm*2200, 6400mm*3200mm and customized size Transformer pressboard Large Size:4400*1600mm,4200*2100mm,4000*2000mm; Medium Size: 2200*1600mm,2200*1470mm,2200*1400mm; Small Size: 2200*1100mm, 2200*1000mm,2000*1000mm. Usage: Mainly used in oil-immersed transformer as insulation material, also used in reactor mutual inductance ware, electric device and etc. H41 Transformer Board Technical Specifications: No Item Unit Specification Standard 1 Thickness mm í_1.6mm í+7.0% >1.6mm-8.0mm í+5.0% 2 Density g/cm3 í_1.6mm 1.00-1.20 >1.6mm-3.0mm 1.00-1.25 >3.0mm-6.0mm 1.15-1.30 >6.0mm-8.0mm 1.20-1.30 3 Tensile strength MD MPa í¦90 CD MPa í¦50 4 Elongation MD % í¦3.0 CD í¦4.0 5 Shrinkage MD % í_1.0 CD í_1.4 TD í_6.0 6 Moisture % 4.0í¬9.0 7 Ash Content % í_1.0 8 Conductivity of Aqueous Extract Ms/m í_10 9 PH of Aqueous Extract / 6.0-9.0 10 Oil Absorbency % í¦9.0 11 Electrical Strength (In Oil) Kv/mm 1.0mm í¦35 1.5mm í¦30 2.0mm í¦30 2.5mm í¦27 ¦3.0mm í¦24 12 Cutting Size Tolerance mm 1.0mm-8.0mm í+10 13 Inclination Tolerance mm 1.0mm-8.0mm í+10 Package:Wrapped with vinyl film for waterproof, weaved material, then core paper packed, and wooden pallets.
Application areas: Measuring-level current transformer used in power system, transformer used on precision measuring instruments (such as watt-hour meter). According to the requirements of different measurement accuracy of the transformer, different soft magnetic materials can be chosen as iron core materials. The higher the permeability of the iron core is, the smaller the measurement error of the transformer is, hence the accuracy is higher. At present, the most common iron core material is cold-rolled silicon steel sheet, followed by Permalloy and nano-crystalline glass alloy. In recent years, demands for transformers with high-precision level (such as class 0.2, class 0.2Sand class0.5S) increased rapidly. When small ratio, low ampere turns are required or the iron core is restricted because of the small volume, the cold-rolled silicon steel often fails to meet the accuracy requirements. Although the Permalloy iron cores with high permeability can meet the required precision, its price is very high. However use of nano-crystalline alloy iron cores can both meet the accuracy requirements and be produced at lower cost than the Permalloy. Therefore, the demand of measuring level current transformer iron core made of nano-crystalline alloy rapidly increased domestically. The typical parameters comparison of the common soft magnetic materials used for current transformer iron cores: Basic parameters Nano-crystalline iron core Permalloy (1J85) iron core Silicon steel iron core Saturation magnetic flux density (Bs) 1.25T 0.75T 2.03T Initial permeability (¦Ì0) 8¡«12, 104 5¡«8, 104 103 Maximum permeability (¦Ìm) 60, 104 60, 104 4, 104 Curie Temperature (¡æ) 570 400 740 Density (g/cm3) 7.25 8.75 7.65 Lamination factor 0.7 0.9 0.95 Thickness (mm) 0.03 0.15 0.3 Features: It is made of the iron-based nano-crystalline strips with a moderate saturation magnetic induction, high permeability and low loss, which can effectively reduce ratio difference angle difference of the transformer. The saturation magnetic induction Bs of nano-crystalline alloy is between the silicon steel and Permalloy. The lower the Bs value is, the lower the security coefficient of the instrument is. When the system failure occurs and large current through the current transformer results therefore, the iron core is more easily filled, and the secondary current no longer increases in proportion, as can assure that the secondary instruments are well protected and not to be damaged. Permeability of nano-crystalline alloy is close to Permalloy and a magnitude higher than silicon steel, so it is suitable to be made as high-precision transformer iron core. The density and lamination coefficient of nano-crystalline is lower than that of Permalloy, under the condition of the same size and similar performance of the two. In this case the nano-crystalline iron core is 1/4 lighter in weight, and 1/3 lower in the manufacturing cost. In addition, the linear range of nano-crystalline alloy is wider than that of Permalloy .It can work for a long time at temperature of -55 ~ 130 ¡æ ,with a good temperature stability. Specifications a. Rectangular core: (mm) Iron Core Size(mm) (mm) The case size(mm) Weight of the iron Core (kg per piece) Turns Ratio N1: N2 Excitation current(mA) Excitation voltage(mV) 55*97/77*119, 25 50*92/82*114, 30 0.53 1:1 25 0.45 95 2.2 1500 53 70*90/100*120, 30 65*85/105*125, 36 0.81 1:1 200 15 1:1 500 50 75*95/105*125, 25 70*90/110*130, 30 0.7 1:1 70 2 1:1 175 8 80*95/120*135, 25 75*90/125*140, 30 1.09 1:1 80 1.7 1:1 600 41 90*90/160*160, 30 85*85/165*165, 36 2.4 1:1 100 6 1:1 500 100 1:1 1000 140 135*135/260*260, 10 130*130/265*265, 16 2.3 1:1 100 1.5 1:1 500 32 82*602/138*658, 45 75*595/145*665, 55 8.8 1:1 100 1.2 1:1 1000 45 1:1 2000 120 b. Ring core: No. The iron Core Size Case size(mm) The weight of the iron core (kg per piece) Turns ratio N1: N2 is 1:1; Input current (mA), 50Hz; Output voltage (mV) 1 1105/1165, 15 1095/1175, 25 8.35 Excitation current 450 1200 2000 Excitation voltage 0.59 2.36 5.28 2 415/520, 15 409/526, 23 6.08 Excitation current 50 250 700 Excitation voltage 0.4 3 11 3 305/490, 15 299/496, 23 9.1 Excitation current 350 900 ¡¡ Excitation voltage 5 20 ¡¡ 4 315/395, 35 309/401, 43 8.2 Excitation current 120 400 ¡¡ Excitation voltage 3 11 ¡¡ 5 198/248, 30 192/254, 37 2.76 Excitation current 100 200 500 1000 Excitation voltage 2 6 35 90 6 198/248, 20 192/254, 27 1.84 Excitation current 100 200 500 1000 Excitation voltage 1.5 3.5 25 60 7 155/200, 30 150/205, 36 2 Excitation current 100 190 1000 Excitation voltage 2.5 9.5 80 8 140/180, 30 135/185, 36 1.58 Excitation current 40 80 240 Excitation voltage 1 2.9 15 9 130/190, 30 125/195, 36 2.38 Excitation current 40 80 240 Excitation voltage 1.2 3.8 17 10 100/140, 30 95/145, 36 1.19 Excitation current 30 120 500 Excitation voltage 0.85 6.8 68 11 90/130, 30 85/135, 36 1.09 Excitation current 30 120 500 Excitation voltage 0.7 6 55 12 90/125, 25 85/130, 31 0.78 Excitation current 30 120 500 Excitation voltage 0.9 7 70 13 80/120, 30 75/125, 36 0.99 Excitation current 200 500 ¡¡ Excitation voltage 20 65 ¡¡ 14 85/115, 30 80/120, 36 0.74 Excitation current 30 120 500 Excitation voltage 0.7 6.5 55 15 85/125, 20 80/130, 26 0.7 Excitation current 30 120 500 Excitation voltage 0.62 5.5 50. wooden case+carton box.
Our company provide 330kV oil-immersed power transformer ,with capacity of 360MVA and below. The transformer is based upon world-wide advanced technology and also incorporates the experiences of internationally leading transformer companies as well as our own long-term experiences. Low loss, low partial discharge and high short circuit withstand capability series transformers are achieved through innovation and optimization. Our transformer conform entirely with latest national standard GB1094.1~2-1996, GB1094.3-2003, GB1094.5-2003 and international standard IEC-76. Outstanding features as follows: 1. Low loss, low noise The core laminations are composed of imported high quality grain-oriented cold-rolled silicon steel sheets with chamfered joints and the joints are step-lapped with 5 steps, thus ensuring low loss and low noise. The inside of the tank is lined with magnetic and copper shields, measures have been take for metallic structural pares located in high magnetic field, to deduce stray loss and thereby the total load loss, and to relieve local overhearing. Performance standard of 330kV class transformers which designed and manufactured by our company, can reach GB 10-type or GB11-type, and the noise is much lower than GB. 2. Safe and reliable service Reliability is the everlasting objective of our company, partial discharge of finished products are constantly kept below 100pC, ensuring that the transformers can be operated under long service voltage and occasional over-voltage without trouble. Low current density in winding conductor and appropriate cooling arrangement ensure that the winding temperature rise and top oil temperature rise are lower than that specified in the national standard by more than 5K and that the mechanical stress in winding conductor during short circuit does not exceed certain safe limit. Together with technological procedures during manufacture and other means to elevate mechanical strength, transformers can withstand server short circuit in all case during service. 3. Easy erection and maintenance To minimize erection work at sit, transformers are so fabricated that lifting the active part out of the tank for inspection after arrival at sit is not mandatory. Beside, all components to be mounted on the transformer at site have been preassembled before dispatch, and all secondary wirings have been laid down into conduits on the transformer and connected to the terminals in the control cabinet or terminal box. Natural oil circulation and forced air cooling (ONAF) are generally adapted in our 180kV class transformers below 240MVA. 70% nameplate rating can still be achieved in case the fans are out of service. Little maintenance work is required for the cooling devices. 4. Careful fabrication Vertical winding machines with tension device are used for winding, so that the windings can be wound more tightly and therefore mechanically strength as a whole. All insulation parts subjected to mechanical stress during short circuit, such as spacers in windings are made with T4 densified pressboard to deduce shrinkage. Drying process for the windings are carried out twice, once for ht individual winding, and again for the assembled phase block. After core and coil assembly, an additional vapor phase drying (VPD) is once more carried out to ensure that all insulation parts are thoroughly dried and no further shrinkage is possible to occur during service. All the high voltage terminals and nearby metallic structural parts are rounded up to prevent partial discharge. High voltage bushing terminals are contained with turrets, and kept concentric with the turret. All the leads are properly crimped and metallized to be rounded up. VPD process insures that the moisture content within the transformer is kept at a very low level, and the core and coil assembly is once more cleaned by condensed vapor flowing down the surfaces. The fabricated tanks are relived from welding stress and shot-blasted integrally, so as to be free form oil leakage trouble and to give the tank a clean, pleasant looking appearance. fumigation wooden case
We are dealing with Nepalese herbs, herbal products and spices at very affordable price since many years. We are exporting Nepali herbs and herbal products to various countries since long time. It has a miraculous healing benefits with no side-effects. We have extensive knowledge about the fauna and flora of Nepal and having knowledge of medicinal plants and spices. Following major Herbs, Spices & Essential oils are: 1.Lycopodium clavatum (clubmoss,ground pine) 2.Swertia chiraita ( Buch-Hum) 3.Soapnuts (Sapindus mukorossi) 4.All Essential oils 5.Large Black Cardamom (Amomum aromaticum) 6.curcuma longa 7.Berberis Aristata 8.Asparagus racemosus 9.Herbs paris/ Love Apple Boch (Paris Polyphylla) 10.Zanthoxylum alatum ( Toothache Tree) 11.Zingiber officinale 12.Roca axudates/asphaltum (shikakai) 13.Nepali Aconite (Aconitum Ferox) 14.Cinnamomum tamala Bark 15.Juniperus Recurva (Himalayan penil ceder) 16.Stinging Nettle ( Urtica Doica Linn. ) 17.Cinnamomum Ceciododaphne 18.Indrayani ( Citrullus Colocynthis Nees) 19. sweet flag (Acorus Calamis) 20.Rheum Australe 21. Rosemarry leaves(Rosmarinus officinalis) 22. Allium Wallichii 23.Matricaria Chamomile 24. Bay leaf 25. Mentha Arvensis 26.Cymbopogon Flexuosus 27.Gaultheria Fragrantissima 28.Herpetospermum pedunculosum 29.Deliphinium denudatum 30.picrorhiza scrophularieflora 31.Acacia concinna DC.(shilajeet) 32.Rudraksha 33. Indian Maddar ( Rubia cordifolia ) 34. Emblic Myrobalan ( Emblica officinalis ) 35. Saxifraga/Rock foil (Berginia ligulata) 36. Morels ( Morchella Esculenta) 37. Minipine ( Cons of Conifer) 38. Nardostachys Jatamansi 39. Valeriana Wallichi 40. Cordyceps Sinensis ( Yarshagumba) 41. Tinospora Cordifolia Wild Miers ( Gurgo ) 42. Stevia & Aloevera 42. Terminalia Belerica(Beleric Myrobalan ) 43. Chebulic Myrobalan 44. Choerospondis Axillaries ( Chinese Plum, Lapsi) 45. Ganoderma 46. Machilus odoratissima (Kaulo) 47. Zanthoxylom oxyphyllunm(siltimur) 48. Moringa Seeds ( sitalchini) 49.Shilajeet,Mumiyo (Black Asphaltum) etc.......... Your Choice
Model Number:X4 Features 9.7″ main touchscreen WIFI/3G/BlueTooth wireless Protected HOME Key Protected HD camera Ventilation enhanced enclosure for new ipad. with credit card reader and blue tooth printer options. All stainless steel anti-graffiti enclosure stand Introduction X4 is a stainless steel ipad kiosk with lockable front panel. X4 datasheet Applications Internet browsing,Exhibition,Apps store,Presentation,Information kiosk,advertisement,loyalty card verification,hotel login,service Technical details Operation System WINDOWS XP WINDOWS 7 Linux 2.6 distribution(i.e. Fedora 9, CentOS 5, Ubantu 10 and SUSE etc) Processor Dual-core Apple A5X custom-designed, with quad-core graphics Display Retina display 9.7-inch (diagonal) LED-backlit glossy widescreen display with IPS technology 2048-by-1536-pixel resolution at 264 pixels per inch (ppi) Touchscreen Multi-Touch Capacitive Cameras, Photos, and Video 5-megapixel iSight camera Autofocus Tap to focus Face detection in still images Video recording, HD (1080p) up to 30 frames per second with audio Video stabilization FaceTime camera with VGA-quality photos and video at up to 30 fps Photo and video geotagging Credit Cardreader(optional) Magnetic card(optional): ISO7810, ISO7811 Track 1/2/3 Printer(optional) Printer type: direct thermal Printing resolution: 384dot per line Paper type: thermal paper Paper thickness: 0.06-0.08 Paper width: 58mm(printing area width: 48mm) Speed: 100mm/s Max paper roll diameter: 140mm Max printing life: 50km Interface: Bluetooth 4.0 technology Rear I/O Connectors 30-pin dock connector port 3.5-mm stereo headphone minijack Built-in speaker Microphone Micro-SIM card tray Enclosure All stainless steel anti-graffiti enclosure Available in cold roll steel Optional Brushed, anodized aluminum or powder coating surface Power consumption Built-in 42.5-watt-hour rechargeable lithium-polymer battery Up to 10 hours of surfing the web on Wi-Fi, watching video, or listening to music Up to 9 hours of surfing the web using cellular data network Power and Charging via power adapter or USB to computer system Operating System iOS Reliability Operation Temperature: 0~35°C StorageTemperature: -20~45°C Operating RH: 0-95%(NC) Max operation latitue: 10000 m Power supply: 110V AC 5A/220V AC 3A IP protection: Front IP54(with only contactless card and touchscreen) IK protection: IK05 electrostatic protection: 1500V impedance: 10kOhm EMC Standard: It is compliance with the council EMC directive 89/336/EEC,EN55022: 1988+A1:2000+A2:2003,EN55024: 1988+A1:2001+A2:2003. Emission: EN 50081-1. Immunity: EN 50082-1. Physical Characteristic Material: 1.5mm stainless steel Dimensions:tbd Gross weight:50KG Net weight: 35KG
Origem: Índia Mumbai. Nós somos o primeiro [desde 1993] Fabricante indígenas e exportador de tintas plastisol e produtos e transferência de calor na Índia desde então não há como voltar atrás. Temos sido aclamado e honrado por instituições de prestígio do nosso país para as nossas realizações e desenvolvimentos. Marca: Beautyflex Lista de Produtos 1] tintas plastisol para impressão directa em t-shirts e outras misturas. 2] Plastisol Transfer para a fabricação de tintas de impressão de transferência. 3] Processo de tintas Plastisol CMYK tela com calibragens perfeito. 4] Adesivo Plastisol Backup para impressão por transferência. 5 Lito] Backup Plastisol branco opaco. 6] prata Plastisol base e colar glitter outras cores imprimíveis. 7] Plastisol base metálica de ouro, prata, bronze, cobre, alumínio e colar. 8] Plastisol base base de mistura de cores suaves. 9] cristal Plastisol base clara 505 para efeito de auto procurar impressão. 10 Limpar] 606 para mistura do pó do brilho. 11] casaco claro 786 para o 1 º casaco fiberlation controle de fundação 12] Clara e Gell cor. 13] B2 Clear. 14], à base de água de desempenho de qualidade Khadi branco superior. 15], de alta densidade aditivo claro e cor. 16] Puff óleo aditivo claro e cor, e à base de água (para uso sem fusão).17] Shimmers 18] reflexiva.19] Folha adesiva.20] adesiva Flock.21 Glow] no escuro 22] Diferentes tipos de brancos de embutimento para opaco super extra. 23] Transferência de impressão litográfica tintas CMYK. 24] Sublimação transferência CMYK tintas litográficas. 25] cole Quitação jeans, algodão, lycra e malhas.26] estiramento Super água Branca baseado.27], fixadores, aglutinantes e espessantes.28] Foam e ligantes espuma. 29] Tintas Offset30], tintas de impressão de tela para o papel, PVC, alumínio, etc 31] da série Não-Phthalate de plastisol. 32] elástico branco água super performance baseada [] Elasto branco. 33] PVC Free não Phthalate produtos da série Plastisol super, água e à base de óleo. 34] Tatto tintas offset.35] Low Bleed brancos série e cores 36] Não sangrar brancos e coloridos.37 perfume] tintas Pearl. 38] folha Direct tintas de impressão efeito sem a necessidade de aplicações de alumínio. 39] Não sangrar backup branco opaco para transferências 40], pó de transferência de adesivo para o algodão, lycra, couro, nylon, rexine, poliéster, spandex. 41] imprensa da transferência de calor para transferência e plastisol aplicações de acabamento. 42 transferências] Calor multicor qualquer quantidade. 43 Gum Table 44] Emulsões Tela 45] Folha de prata, ouro e cor. 46] Mesh / pano de Parafusos, Rodo. 1 5 25 30kgs.
TK-17 TK-18 TK-20H TK-50 TK-55/57 TK-60 TK-66/67 TK-70/76 TK-100 TK-110/111/112/113 TK-120/122 TK-130/131/132/133/134 TK-137 / 135 TK-140/142/144 TK-160/161/162/164 TK-170/171/172/174 TK-310/312 TK-320/322 TK-330/332 TK-340/341/342/343/344 TK-350/352/354 TK-360/361/362/364 TK-440 / 441 / 442 TK-450/451/452/454 TK-410/411/413 TK-418 TK-420 / 421 TK-428 TK-435/437/439 TK-438 TK-448 TK-458 TK-475 TK-601/603 TK-675/678/679/677 TK-685 / 687 / 689 TK-710/712 TK-715/717/718 TK-725 / 729 KM-1505 KM-1530 KM-2530/3035 TK-500/501/502 K TK-500/501/502 CMY TK-510/512 K TK-510/512 CMY TK-520/522 K TK-520/522 CMY TK-540/541/542/ 543/544 K TK-540/541/542/ 543/544 C TK-550/551/552/ 554 K TK-550/551/552/ 554 CMY TK-560/561/562/ 564 K TK-560/561/562/ 564 CMY TK-570/571/572/ 574 K TK-570/571/572/ 574 CMY TK-580/581/582/584 K TK-580/581/582/584 CMY TK-590/591/592/594 K TK-590/591/592/594 CMY TK-880/882 K TK-880/882 CMY TK-855/857/858/859 K TK-855/857/858/859 CMY TK-865/867/868/869 K TK-865/867/868/869 CMY KM 2230 K KM 2230 C/M/Y Aficio Series 4000 4800 FT 1035 FT 2050 FT 410 FT 420 FT 450 I/E FT 610 AF 20DI / 20DE AF 1220D AF 1230D AF 1250D AF 1270D AF 1350D AF 2205D AF 2210D AF 2220D AF 3200D AF 3205D AF 3210D AF 5200D AF5205D AF5305D AF 6210D AF8105D AF8110D AF8205D 10D MP2500 MP3500 SP 811 K SP 811 C/M/Y SP 820 K SP 820 C/M/Y CLP4000 K CLP4000 C/M/Y MP C2030 K MP C2030 C/M/Y MP C2500 K MP C2500 C/M/Y MP C2800 K MP C2800 C/M/Y MP C3500 K MP C3500 C/M/Y MP C4000 K MP C4000 C/M/Y MP C2501 K MP C2501 C/M/Y MP C3501 K MP C3501 C/M/Y MP C2801 K MP C2801 C/M/Y 3235 K/C/M/Y NPG-1 NPG-3 NPG-4 NPG-5 NPG-7 NPG-8 NPG-9 NPG-10 NPG-11 NPG-12 NPG-14 NPG-15 NP1010 NP3025 NP3325 NP4335 NP5020 NP6028 CP 200 GP 300 GP 550 G-16 G-18 G-19 G-20 G-21 G-25 G-26 G-27 G-28 G-29 G-32 G-36 G-50 G-51 G-54 G-55 G-35 K G-35 C/M/Y C2570 K C2570 C/M/Y C3200 K C3200 C/M/Y G-45 K G-45 C/M/Y G-46 K G-46 C/M/Y G-52 K G-52 C/M/Y 270 410 470 MT-101 A/B/C MT-102 A/B/C MT-104 A/B/C MT-201 A/B/C MT-202 A/B/C MT-204 A/B/C MT-401 A/B/C MT-501 A/B/C MT-601 A/B/C MT-602 A/B/C 105A/B/C 106A/B/C 205A/B/C 302A/B/C 303A/B/C 502A/B/C 603A/B/C 604A/B/C 701A/B/C TN 114 TN 115 TN 116 / 117 TN 211 TN 217 / TN216 TN 311 TN 414 TN 511 TN 710 TN 210K K TN 210K C/M/Y TN 213K K TN 213K C/M/Y TK 214K K TK 214K C/M/Y TN 216 K TN 216 C/M/Y TN 310K K TN 310K C/M/Y TK 312K K TK 312K C/M/Y TN 319 K TN 319 C/M/Y TN 510K K TN 510 C/M/Y TN 611 K TN 611 C/M/Y K-1212 K-1216 K-2223 K-1216/2223 K-2028 K-3135 K-3240 K-7118 / TN101K K-7020 K-7022 / TN301K K-7035 K-7135 K-7145(TN401K) A/U K-7033 K-7040 K-7050 K-7055 K-7165(TN601K) K-7075 K-C8050 K K-C8050 C/M/Y 1027 XM35 XM118 XM128 XM186 XW235 XDC286 XAP450 XDC505 XP315 XP5020 XP5500 XV2018 XV250 XV330 XV400 DC 1080 XV5915 DCC 400 / 450 K C/M/Y DCC 400 K C/M/Y DC 450 K C/M/Y DCC 7700 K C/M/Y DCC 7750 K C/M/Y DCC 7760 K C/M/Y DIII 2200 K C/M/Y DPC 2250 K C/M/Y DPC 2255 K C/M/Y XM24universal K C/M/Y XM24 K C/M/Y C 3535 K C/M/Y C 7328 K C/M/Y C 2428 K C/M/Y DCC 6550 K C/M/Y DCC 250 K DCC 250 C DCC 250 M DCC 250 Y DCC 12 K C/M/Y BD1550 C/D/E BD1710 C/D/E BD2060 C/D/E BD3560 C/D/E T-1600 C/D/E T-1640C-5K T-1640C-10K T-1640C-24K T-1810C-5K T-1810 C/D/E T-2320 C/D/E T-2340 C/D/E T-2500 C/D/E T-3500 C/D/E T-3520 C/D/E T-4530 C/D/E -24K T-4530C-10K T-6000 C/D/E T-7200 C/D/E T-3511C K C/M/Y 125/730 116 / 126 / 880 214 216 222 230 EU/ASIA/UNIVERSAL 234 235 240 EU/ASIA/UNIVERSAL SD-360ST SF-830 780 AR-016 T/ST/FT/NT AR-020 T/ST/FT/NT AR-021 FT AR-022 ST AR-152/152NT AR-153NT/ST AR-158 AR-168NT/FT/ST/T AR-202T/ST/FT/NT AR-203ST AR-204ST AR-209ST AR-270ST/FT/T AR-271 AR-310ST/NT/FT/T AR-311ST/NT/FT/T AR-312T/CT/NT AR-450 AR-453 AR-455 AR-456 MX-27CT K MX-27CT C/M/Y MX-31CT K MX-31CT C/M/Y MX-40CT K MX-40CT C/M/Y MX-70CT K MX-70CT C/M/Y FP7718 FP7818 FP7728 P7113 DP2310 DP1810 DP1520 DP1515 DP8016 DP8025 DP2500 76A 83E 85E / 87E 88A / 90E 92A / 94E KX-FA411A AD158 AD159 AD161 AD165 AD168 AD255 AD258 AD289 AD309 AD358 AD429 AD208 K AD208 C/M/Y AD256 / 358 K AD256 / 358 C/M/Y AD288 K AD288 C/M/Y AD258 K AD258 C/M/Y 492 9314 9314E 9325 1801 2720 3400 3620 B1 B4 B5 CS171 K CS171 C/M/Y CS163 K CS163 C/M/Y CS180 K CS180 C/M/Y CS175 K CS175 C/M/Y D-COLOR MF 25 K D-COLOR MF 25 C/M/Y D-COLOR MF 201 PLUS K D-COLOR MF 201 PLUS C/M D-COLOR MF 201 K D-COLOR MF 201 C/M/Y D-COPIA MF 22 K D-COPIA MF 22 C/M/Y D-COPIA MF 30 K D-COPIA MF 30 C/M/Y. Customer's designs and logos are accepted. OEM/neutral/customized packing is available.
High quality Automated Back Flushing Oil Filter Cartridge ZCL-I-450 for power system specialized in manufacturing and providing components for turbines, coal-fired generators, and hydro units, as well as for electrical equipments, machinery parts, hydraulic machinery and parts. Our company is seated in the famous industrial with advanced technology, complete facilities and scientific management. Productions are in strict accordance with national standards. can offer many spare parts for power plants as below: DF-Automated Back Flushing Oil Filter Cartridge; ZCL-I-450-DF filter PLFX-30-X3 oil filter YQ2U-A25 10S oil filter Q2U-E160 30S water filter system MSL-125 hydraulic filter housing 1300R010BN3HC/-V string wound filter cartridge SGLQ-6000A water filter parts KLS-100I lube oil filters TZ-25 1 Main pump discharge Filter AP1E101-03D10V/-WF hydraulic oil filter element YWU-40 100-J filter JWUX-250 180 Air filter BDE1000F2W2.X/-RV0.003 Automated Back Flushing Oil Filter Cartridge; ZCL-I-450 water cleaner filter XLS-100 hydraulic filter cross reference 0160D005BH3HC hydraulic filter housing XUI-A25 50S water filter purifier SWF5 pp filter cotton DLS-500 excavator filter element HX.BH-10 10W Filter element DQ6803CA20H1.5C filter tank hydraulic LQ1212LED Filter element DS103EA100V-W filter HX-63 40W filter QYLX-400 30Q2 filter pressure hydraulic SKX-160 20 filter pressure hydraulic housing 21FC5121-130 15/20 filter YQ2UX-160 20 filter FAX-400 1 oil filter machine 0060D005BH3HC filter hydraulic oil WY300 10Q2 pp melt blown filter machine SG125/0.8 pp filter cartridge making machine ML125 replaceable filter drier core TZ-100 30 oil filter equipment TZX2-250 3 Automated Back Flushing Oil Filter Cartridge; ZCL-I-450 DFZYR-2023-4-27-ZYR
vacuum pump Wave spring P-1916 YOYIK has been deeply involved in the field of power plant spare parts manufacturing for many years, taking technological innovation as the core driving force, and constantly launching new products to adapt to market changes. The company not only has advanced production equipment, such as CNC lathes, machining centers, etc., but also has established a strict quality management system to ensure that every product shipped meets the highest industry standards. From turbines to coal-fired generators, YOYIK's products are widely used in many key engineering projects at home and abroad, contributing to the sustainable development of the energy industry. Our company can provide replacement parts for various power facilities, as follows: #DF-vacuum pump Wave spring P-1916-DF Globe valve WJ20N4.0P bladder accumulator working NXQ-10/31.5-L-ZD EH oil HP accumulator bladder NXQ-A-20/31.5-F-V shutdown valve types KHWJ10F1.6P DN10 PN16 Electric gate valve Z41H-40DN300 Diaphragm metering pump GM-0050 Overpressure nut 1C121928982 4 2 dc valve DG4-3-2A-VM-U-SA7-60 Accumulator bladder 0508.2572T1201.AW013 Skin bag and sealing components HTXNQ25.Z.MF Stabilizing pump 50AY35*12 Pressure reducing valve AW5000-10 0.05ï½?0.85MPa Oil cylinder seal 5-7391-0115-99 Seal oil main oil pump DLZB820-R64B tee joint YZD25LG-7-27 Magnetic cut-off throttle 235.31.08 Connecting components BKH-20SR-4425-FPM-1.4571 accumulator cylinder NXQ-A-10/31.5-L-EH Seal Oil Circulation Pump Coupling Kit HSNH280-43N2 Machinery Seal N0330/2100/K/M/506B Inserting rim pump shaft oil 2FK5D32M-05-04 accumulator capsule NXQ-AB-10/31.5-L O type Seal ring 280x7.0 shaft FK4E39-K pressure relief valve YSF12-70/130-TH EH oil shock-absorbing pipe clamp SP763PA-DP-AS r ddv servovalve G761-3600 300MW turbine AC lube pump impeller Thrust washer 125LY-35-6 low pressure hydraulic accumulator NXQA-16-20 F/Y Pressure measuring hose CSH/M20*1.5-1500 EH oil cooler CY300B.0 pressure hose SMS-15/N1/4-3048mm-C Three way valve LXF100/1.6C/P sealing ring TRd8.687.552 EH oil circulation pump HQ37.02Z The electromagnetic valve HT8316G074 220VDC vacuum pump Wave spring P-1916 vacuum pump Wave spring P-1916 ZYR-DFYL-2025-1-13
vacuum pump Wave spring P-1916 YOYIK has been deeply involved in the field of power plant spare parts manufacturing for many years, taking technological innovation as the core driving force, and constantly launching new products to adapt to market changes. The company not only has advanced production equipment, such as CNC lathes, machining centers, etc., but also has established a strict quality management system to ensure that every product shipped meets the highest industry standards. From turbines to coal-fired generators, YOYIK's products are widely used in many key engineering projects at home and abroad, contributing to the sustainable development of the energy industry. Our company can provide replacement parts for various power facilities, as follows: #DF-vacuum pump Wave spring P-1916-DF Globe valve WJ20N4.0P bladder accumulator working NXQ-10/31.5-L-ZD EH oil HP accumulator bladder NXQ-A-20/31.5-F-V shutdown valve types KHWJ10F1.6P DN10 PN16 Electric gate valve Z41H-40DN300 Diaphragm metering pump GM-0050 Overpressure nut 1C121928982 4 2 dc valve DG4-3-2A-VM-U-SA7-60 Accumulator bladder 0508.2572T1201.AW013 Skin bag and sealing components HTXNQ25.Z.MF Stabilizing pump 50AY35*12 Pressure reducing valve AW5000-10 0.05ï½?0.85MPa Oil cylinder seal 5-7391-0115-99 Seal oil main oil pump DLZB820-R64B tee joint YZD25LG-7-27 Magnetic cut-off throttle 235.31.08 Connecting components BKH-20SR-4425-FPM-1.4571 accumulator cylinder NXQ-A-10/31.5-L-EH Seal Oil Circulation Pump Coupling Kit HSNH280-43N2 Machinery Seal N0330/2100/K/M/506B Inserting rim pump shaft oil 2FK5D32M-05-04 accumulator capsule NXQ-AB-10/31.5-L O type Seal ring 280x7.0 shaft FK4E39-K pressure relief valve YSF12-70/130-TH EH oil shock-absorbing pipe clamp SP763PA-DP-AS r ddv servovalve G761-3600 300MW turbine AC lube pump impeller Thrust washer 125LY-35-6 low pressure hydraulic accumulator NXQA-16-20 F/Y Pressure measuring hose CSH/M20*1.5-1500 EH oil cooler CY300B.0 pressure hose SMS-15/N1/4-3048mm-C Three way valve LXF100/1.6C/P sealing ring TRd8.687.552 EH oil circulation pump HQ37.02Z The electromagnetic valve HT8316G074 220VDC vacuum pump Wave spring P-1916 vacuum pump Wave spring P-1916 ZYR-DFYL-2025-1-13
Magnus film faced shut tering plywood is manufactured with high density timber in ultra modern hot presses. Since it is manufactured with CPGL technology, thus it has extra strength than ordinary film face ply. For structurally strong and better bonding it is treated differently while manufacturing. Magnus film face shuttering ply is widely known for the maximum repetitions it gives. Users find it a very useful & economical product worth their investment. TECHNICAL SPECIFICATIONS (IS:4990:1993) Dimension BIS Requirement Observation Values 1 Length 2440 + 6 2442mm 2. Width 1220 + 3 1222mm 3. Thickness 12mm ± 5% 11.90mm 4. Squareness 2mm/1000 mm 0.95mm 5. Edge straightness 2mm/1000mm 0.50mm Physical properties 6. Density 0.95 0.95 7. Moisture contents 5 - 15% 7.50% 8. Adhesion of plies (in dry state) Some adherent fibre distributed Satis factory more or less uniformly 9. Adhesion of plies (in wet state) do Satisfactory 10. Glue shear strength (in dry state) vg. 1350N 1520N Ind.  1100N 1190N 11. Glue shear strength (in wet state) vg.  1000N 1260N Ind.  800N 900N 2 2 12. Tensile strength Along the grain 480kg./cm 525kg./cm 2 2 Across the grain 340kg./cm 370kg./cm 2 2 Total 820kg./cm 895kg./cm 13. Static bending strength 2 2 along the grain M.O.E.A vg.  7500N/mm 8420N/mm 2 2 ind.  6700N/mm 6975/mm 2 2 Across the grain M.O.E.Avg. 4000N/mm 4800N/mm 2 2 Ind. 3600N/mm 4000N/mm2 Along the grain M.O.R.Avg.50 68N/mm 2 Ind.  45 50N/mm 2 Across the grain M.O.R. Avg. 30 47N/mm 2 Ind. 27 31N/mm 3 3 14. Retention of preservative (ACC) 12 kg/m 12.95 kg/gm 15. My cological test (a) Visual inspection (a) Show no separation sign (b) Glue shear strength Avg. 1000 N 1260 N Adhesion of plies Ind. 800 N 910 Adherent fibre distributed Satisfactory Special features of Magnus film faced shuttering plywood are: Magnus film faced shuttering plywood is most effective in RCC constructions. It has a smooth mirror like superior finishing on both surfaces. It saves up to 45% of cost compared to other similar products due to more repetition during shuttering work. Its cross laminated structure between face veneer, core veneer and the film again enhances the strength of ply. After using it as shuttering plywood for many times, it can be re�used for paneling, roofing, flooring, partitions etc.
Apple imac 27" 3.4ghz flatscreen desktop Is of 3.4ghz quad-core intel core i5, turbo boost up to 3.8ghz, 8gb memory, 1tb hard drive1 nvidia geforce gtx 775m with 2gb video memory. Standard
