Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
4N toothbrushes in a blister pack 84 such packs in a case 30 such cases on a pallet pallet size 120 x 100 x 135 by air OR 54 such cases on a pallet pallet size 120 x 100 x 231 by sea OR 625 such cases direct on floor without pallet in a 20 dry container OR 1250 such cases direct on floor without pallet in a 40 dry container OR 1525 such cases direct on floor without pallet in a 40 HC dry container
2N +1N FREE toothbrushes in a blister pack 84 such packs in a case 30 such cases on a pallet (pallet size 120 x 100 x 135) by air OR 54 such cases on a pallet (pallet size 120 x 100 x 231) by sea OR 625 such cases direct on floor, without pallet in a 20' dry container OR 1,250 such cases direct on floor, without pallet in a 40â?? dry container OR 1,525 such cases direct on floor, without pallet in a 40â?? HC dry container.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine. Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place. Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor. We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh - 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder) - 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder) Product Packing - 12.5/13/14 Kg Paper Bag inside 1 Poly Bag - 20/25 Kg Cartoon inside 1/2 Poly Bag - 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag Our range includes: - Dehydrated Garlic Flakes/Cloves (5-10mm) - Dehydrated Garlic Minced (1-3mm, 3-5mm) - Dehydrated Garlic Granules (G1, G2, G3) - Dehydrated Garlic Powder (80-100 mesh) -
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Important Note: We can also do OEM/ Private Labeling Port of Loading: Semarang, Indonesia Baby Diapers FLUFFY Tape (Velcro) Type. Available Variants: 1. FTS10 (S Size. 1 Box = 10 Bag x 30 Pcs) 2. FTS 20 (S Size. 1 Box = 20 Bag x 15 Pcs) 3. FTS 40 (S Size. 1 Box = 40 Bag x 6 Pcs) 4. FTM 9 (M Size. 1 Box = 9 Bag x 30 Pcs) 5. FTM 18 (M Size. 1 Box = 18 Bag x 15 Pcs) 6. FTM 36 (M Size. 1 Box = 36 Bag x 6 Pcs) 7. FTL 8 (L Size. 1 Box = 8 Bag x 30 Pcs) 8. FTL 32 (L Size. 1 Box = 32 Bag x 6 Pcs) 8. FTX 7 (XL Size. 1 Box = 7 Bag x 30 Pcs) 9. FTX 14 (XL Size. 1 Box = 14 Bag x 16 Pcs) Baby Diapers FLUFFY Pants Type. Available Variants: 1. FPS 20 (S Size. 1 Box = 20 Bag x 12 Pcs) 2. FPM 8 (M Size. 1 Box = 8 Bag x 24 Pcs) 3. FPM 18 (M Size. 1 Box = 18 Bag x 12 Pcs) 4. FPM 34 (M Size. 1 Box = 34 Bag x 6 Pcs) 5. FPL 7 (M Size. 1 Box = 7 Bag x 24 Pcs) 6. FPL 18 (L Size. 1 Box = 18 Bag x 12 Pcs) 7. FPL 30 (L Size. 1 Box = 30 Bag x 6 Pcs) 8. FPX 16 (L Size. 1 Box = 16 Bag x 12 Pcs) 9. FPX 26 (L Size. 1 Box = 26 Bag x 8 Pcs)
important Note: We can also do OEM/ Private Labeling Port of Loading: Semarang, Indonesia Baby Diapers Mamamia Tape (Velcro) Type. Available Variants: 1. MTS10 (S Size. 1 Box = 10 Bag x 24 Pcs) 2. MTS 20 (S Size. 1 Box = 20 Bag x 12 Pcs) 3. MTM 10 (M Size. 1 Box = 10 Bag x 24 Pcs) 4. MTM 20 (M Size. 1 Box = 20 Bag x 12 Pcs) 5. MTM 40 (M Size. 1 Box = 40 Bag x 6 Pcs) 6. MTL 10 (L Size. 1 Box = 10 Bag x 24 Pcs) 7. MTL 20 (S Size. 1 Box = 20 Bag x 12 Pcs) 8. MTL 36 (S Size. 1 Box = 36 Bag x 6 Pcs) 9. MTX 10 (XL Size. 1 Box = 10 Bag x 24 Pcs) 10. MTX 20 (XL Size. 1 Box = 20 Bag x 12 Pcs) Baby Diapers Mamamia Pants Type. Available Variants: 1. MPS20 (S Size. 1 Box = 20 Bag x 12 Pcs) 2. MPM9 (M Size. 1 Box = 9 Bag x 16 Pcs) 3. MPM 20 (M Size. 1 Box = 20 Bag x 12 Pcs) 4. MPM 34 (M Size. 1 Box = 34 Bag x 6 Pcs) 5. MPM 60 (M Size. 1 Box = 60 Bag x 4 Pcs) 6. MPL 8 (L Size. 1 Box = 8 Bag x 16 Pcs) 7. MPL 20 (L Size. 1 Box = 20 Bag x 12 Pcs) 8. MPL 30 (L Size. 1 Box = 30 Bag x 6 Pcs) 9. MPL 54 (L Size. 1 Box = 54 Bag x 4 Pcs) 10. MPX 18 (XL Size. 1 Box = 18 Bag x 12 Pcs) 11. MPX 26 (XL Size. 1 Box = 26 Bag x 8 Pcs)
Indomilk UHT 190 ml. 1 Container FCL 20 ft approx. 3.800 box. 1 box = 30 pcs x 190 ml Available flavors: Chocolate, Vanilla, Strawberry. Shelf Life 9 Months. Language in Packaging: English, Bahasa Indonesia. Port of Loading: Semarang, Indonesia Note: We could paste sticker on each pack should there is any additional information needed (importer name, information in other language, etc). Also available at 115 ml, 250ml, and 1 liter variants.
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47