1500W Off Grid Power Pure Sine Wave Inverter Suppliers and Manufacturers

1500W off grid power pure sine wave inverter P section What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source.  Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-1500P Output AC Voltage 100-120V/220-240V AC Rated Power 1500W Surge Power 3000W Waveform Pure Sine Wave USB port 5V  2.1A 5V  2.1A 5V  2.1A 5V  2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 32.5*25.2*10.1cm(L*W*H) N.W(KG) 4.3kG G.W(KG) 5.2kG Warranty 2years

Product Introduction SANDI Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.

1500 watt inverter pure sine wave ROGER Pure Sine Wave VertaMax DC to 120 AC Power Inverter provides household power for RV's, cars, boats and wind & solar off-gird systems! The Pure Sine Wave VertaMax 1500 Watt converts 12 volt battery power to 120 AC power so you can power up household appliances when the electrical grid is not accessible. The Pure Sine Wave VertaMax 1500 is capable of powering any device or multiple devices that do not exceed 1500 Watts in total continuous power draw (3000 Watt surge capacity). Typical examples of appliances that can be powered by this inverter are: computers, televisions, video game players, cellular phone charger, a microwave and the list goes on. The ROGER 1500 provides reliable, pure sine wave AC power whenever you need it! url:http://www.rogerele.com

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter�¢??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer�¢??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

3 Phase off-Grid Pure Sine Wave Inverter Technical Features:   * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made.     We can make products according to your requirements.

1.Main Features: a. Durable construction for long life under extreme environmental conditions b. Low idle current (less than 1 watt) conserves energy when no loads are present c. power Inverter has soft start capability for starting heavy loads d. Built-in starting control circuits for two- and three-wire generator starting systems e. Simplified controls with a snap-on cover that protects settings from being accidentally changed f. Better thermal performance allows full output power to 50¡ãC (122¡ãF) without de-rating g. High surge capacity starts more difficult loads and handles overload conditions reliably h. Durable powder coated, corrosion resistant steel chassis i. New digital display shows kilowatts (kW) when inverting and amps (A) when charging, plus incorporates a robust ON/OFF switch and status indicators j. 70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance. 2. Protection Features: A. Battery over voltage and under voltage protection B. Over temperature protecton C. Automatic overload protection D. Short circuit protection. F.pure sine wave inverter g. pure copper transformer h.1kw to 6kw available i. low frequency inverter j. huge charge current k. support solar system, generator.

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

Specification Sr-300-s sr-300-s-12vsr-300-s-24v "output Rated power300w Maximum output poweload 120~150%(3min.);2003sec) Ac voltage100~120vac / 200~240vac (optional) Frequency50h0.1% or 60h0.1% (optional) Waveformpure sine wave output (thd

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.

12V Dc To 220V Ac 1000W Pure Sine Wave Power Inverter/Converter What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source.  Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-1000P Output AC Voltage 100-120V/220-240V AC Rated Power 1000W Surge Power 2000W Waveform Pure Sine Wave USB port 5V  2.1A 5V  2.1A 5V  2.1A 5V  2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 31.1*16.8*9.6cm(L*W*H) N.W(KG) 2.55kG G.W(KG) 2.9kG Warranty 2years

4000W pure sine wave car power inverter P section What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source.  Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-4000P Output AC Voltage 100-120V/220-240V AC Rated Power 4000W Surge Power 8000W Waveform Pure Sine Wave USB port 5V  2.1A 5V  2.1A 5V  2.1A 5V  2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 54*25.5*10.3cm(L*W*H) N.W(KG) 8.9kG G.W(KG) 10.0kG Warranty 2years

2000w DC pure Sine wave power inverter. -

Pure sine wave power inverter with built-in charger and auto transfer switch (range from 300w to 3000w) Special features: 1. Soft start&external fuses 2. Usb&remote control 3. Three stage battery charge: bulk/absorption/float charge 4. Temperature and load controlled dc fans 5. Protection: led indicator light& audible alarm 6. Ce and rohs approved Inner box and carton

1. Soft start and external fuses 2. 1.5 times rated power for 10s, 2 times continue for 2s 120%

1. Pure sine wave power inverters are featured as high reliability, and low failure rate, 2.Input & output fully insolated. 3.Soft start: Smooth startup of the appliances. 4.Pure sine wave output waveform: Clean power for sensitive loads. 5.Two LED indicators on the front panel shows the working and failure state. 6.Protection, inputlowvoltage protection, input overvoltage protection 7.Small and light: With the technology of CPU centralized control and SMD inside, 8.The product is very small and light. 9.Intelligent control of cooling fan: Using CPU to control the working status of the cooling fans 10.Saves the power and improves the working efficiency. 11.Low noise but high efficiency while working. 1500W Pure sine wave power inverter Max continuous power : 1500w Peak Load Power Rate:3000w No load Current: less than 0.6A Input DC voltage Range:DC10-15.5V / DC20-30V Output Voltage Range:AC120/220V±5% Output Frequency Range:50/60+/-3Hz Max Outer Temperature:less than 65c Max Power Efficiency:> 86% High Voltage Cut Off Level:>DC15.5V / >DC30V Low Voltage Alarm Level:DC10±0.3V / DC20±0.3V Overload and Short-circuit Protection:yes Input Voltage:less than DC10V / less than DC20V THD :less than 5% cooling : Fan