Expanded PTFE sheet is manufactured by expanding 100% virgin PTFE that uses a proprietary process to produce uniform and highly fibrillated microstructure with equal tensile strength in all directions. The resulting product exhibits characteristics significantly different than conventional PTFE sheet. Expanded PTFE is much softer and more flexible than regular PTFE sheet, so it conforms easily to irregular and rough surfaces.
Expanded PTFE sheet is manufactured by expanding 100% virgin PTFE that uses a proprietary process to produce uniform and highly fibrillated microstructure with equal tensile strength in all directions. The resulting product exhibits characteristics significantly different than conventional PTFE sheet. Expanded PTFE is much softer and more flexible than regular PTFE sheet, so it conforms easily to irregular and rough surfaces.
Expanded PTFE sheet is manufactured by expanding 100% virgin PTFE that uses a proprietary process to produce uniform and highly fibrillated microstructure with equal tensile strength in all directions. The resulting product exhibits characteristics significantly different than conventional PTFE sheet. Expanded PTFE is much softer and more flexible than regular PTFE sheet, so it conforms easily to irregular and rough surfaces.
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
This mask pack contains 15% Centella Asiatica to help soothe the skin comfortably. Containing green tea extract, mugwort extract, and 3 types of hyaluronic acid, it provides moisture to the skin from deep within. - Thin Tencel sheet - Deep hydration - Moisture barrier
Code 83200: Non-woven adhesive bandage and retention sheet. Features 1. Non-woven fabric, and laminated with released paper. 2. Hypoallergenic adhesive leaves little or no residue. 3. Provides a strong adhesion, yet us easy to remove. 4. Porous and breathe Color: White Size: 5 cm x 9.14 m(2x10 yds) 10 cm x 9.14 m(4x10 yds) 15 cm x 9.14 m(6x10 yds) 20 cm x 9.14 m(8x10 yds) 30 cm x 9.14 m(12x10 yds)
Specifications: Sheet Size:210mm x 297mm, International Size A4 Quality: Imported 100% Virgin Wood Pulp Whiteness = 102-104%, Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 Cobb Test: 27-33 g/m2 27-33 multi-function A4 copy paper Basic weight - 70gsm, 75gsm, 80gsm Size - A4, A3, 8.5*11",8.5*13",11*17" Moisture - 3.5%-4.5% capapacity - >94% Brightness - 101-104% Place of Origin - Thailand Key Performance - No jam in photocopy machine Leave no dust in the copy machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for Photocopy Machines,Laser Printers,Inkjet Printers,Fax Machines Packing - 500sheets/ream,5,8 or 10reams/carton PACKING DETAILS - 500 Sheets per Ream 5 Reams per Box 1560 Boxes per 20ft container( With Pallet) 1600 Boxes Per 20ft container( Without Pallet) 7800 Reams Total in one 20FCL( With Pallet) 8000 Reams Total in one 20FCL( Without Pallet)
We are supplier and exporter of Copper Cathode. Copper cathode LME standard, Non LME registered, fixed price & LME discount. SBLC, DLC, Non operative LC.. Origin: USA, Congo, Zambia and China. Purity: >99.99% - 99.97% - 99.95%. Product: Copper Cathodes (Electrolytic Grade A) Size: 914mm X 914mm X 12mm (appr. ) Weight of each sheet: 125kgs +/- 1% Net weight of each pallet: 2M/T +/- 1% Min. Weighs in each container: 20 M/T appr Gross weight of each container: 22.2M/T appr.
Rattan cane webbing is a handcrafted product. The artisans select the straight and soft rattan cane to weave into the webbing. While weaving, the artisans have to calibrate the net meticulously to make each pattern uniform in the net. Therefore, it takes more than 10 days for one artisan to knit a long rattan webbing sheet with the dimension: 45 centimeters wide and 15 meters long. The final product is beautiful and durable to the time. Moreover, this product is easy to clean and maintenance. Product name: Rattan webbing. Usage: For rattan furniture. Dimension: Width 45cm, 60cm, 70cm, 90cm,... X 15m length. Packing: Carton, pallet, big bag, strap or customized. MOQ: 10 rolls. Delivery time: 7-30 days after sample approved or according to customer's exact order. Trade Terms: FOB, CNF, CIF
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
The description "BARD PTFE FELT: 6" X 6"" suggests a product manufactured by Bard that consists of PTFE (polytetrafluoroethylene) felt material with dimensions of 6 inches by 6 inches. PTFE is a synthetic polymer known for its nonstick properties, chemical resistance, and durability. Here are some general considerations based on the description: Material: PTFE, also known by the brand name Teflon, is a high-performance polymer with excellent chemical resistance and low friction properties. Felt Form: The material is described as "felt," which implies a fabric-like structure with a soft and fibrous texture. Size: The dimensions are specified as 6 inches by 6 inches, indicating the length and width of the material. BARD: Bard is a well-known medical device company that produces a variety of healthcare products, including materials used in surgical and medical applications.
We are importers and exporters of 1) recycle paper and tyre, paper product duplex, occ and ncc, ceramic tiles & sanitary wares, plastic recycle product ldpe. 2) industrial items : all kind of tarpaulin, pp corrugated sheets, ptfe lined pipes , fitting flanges , bar cutting and bending machineries, wood processing machineries, 3) oil & gas industries: all mech items pipes/ fittings // flangs and mech packages 4) soda ash, bicarb, free flowing edible and industrial salts etc 5) fmcg, atop, namkeens, foodstuff, pulses, grains, spices & besan, sarabati fresh chakki atta & maida. etc.Import export trading
Car front seat organizer. It is specifically used to store documents, portfolios, books, laptops, marker pens, signature pens and other work materials that you need to work at any time. Allows you to easily find the documents you need while keeping the environment in the car neat and tidy. Large capacity front seat car organizer width 33.5x43 cm height, which can accommodate notebooks, 14 inch laptop, 1 marker, four signature pens, hand sanitizer, 2 umbrellas or water glasses and other commonly used items. Both sides are equipped with buckles to expand the capacity, allowing you to flexibly adjust the capacity of the storage bag to the number of items stored. Separate laptop compartment. The front seat organizer of the car has a separate laptop compartment filled with EPE material of sufficient thickness. To prevent scratching of the computer, the inner compartment is made of soft suede material. High-quality workmanship. The storage bag for the front seat is made of high-quality 600D polyester, which is dustproof, wear-resistant and shiny. An X-shaped reinforcement sewing method is used on the handle connection, which has a strong support force and avoids tearing due to continuous winding. We use high quality thick metal zipper, smooth and not easy to damage. Double fastening straps always remain stable. To prevent the storage bag from shaking or dropping items while driving, the storage bag is equipped with two adjustable fastening straps. Installation method: Step 1: Simply install the short belt on the headrest, Step 2: Wrap the long belt around the back of the car seat to attach it.
Product Name Carbon steel plate 25crmo4 alloy steel sheet price Thickness 3mm~300mm,2mm-100mm is common thickness,also can customize Width 1000~3000mm,common width is 1250mm,1500mm,2000mm,2200mm Length 1000~12000mm,can as your request cut Surface Clean,finished, blasting and painting or as your request Delivery Hot Rolled, Controlled Rolling,Normalizing,Annealing, Tempering,Quanching, Q+T Packing Steel Strapping,fixing in the Container,can customize
Product Name Carbon steel plate 25crmo4 alloy steel sheet price Thickness 3mm~300mm,2mm-100mm is common thickness,also can customize Width 1000~3000mm,common width is 1250mm,1500mm,2000mm,2200mm Length 1000~12000mm,can as your request cut Surface Clean,finished, blasting and painting or as your request Delivery Hot Rolled, Controlled Rolling,Normalizing,Annealing, Tempering,Quanching, Q+T Packing Steel Strapping,fixing in the Container,can customize
Size: All sizes Type: All types High-protein low-fat food; Shape : Tube, Oval, Sheet, And Fiber Has a tonic value; Dried under sunshine No oil, no unknown smell 20cm x 20cm x 10cm (7.87in x 7.87in x 3.94in) Age group : From child to old Shelf Life : Normal Drying Process : Cleaned and dried under sunshine
Size: All sizes Type: All types High-protein low-fat food; Shape : Tube, Oval, Sheet, And Fiber Has a tonic value; Dried under sunshine No oil, no unknown smell 20cm x 20cm x 10cm (7.87in x 7.87in x 3.94in) Age group : From child to old Shelf Life : Normal Drying Process : Cleaned and dried under sunshine
Application: Electric light industry, Machinery manufacturing, Building industry ,defense industry, Other fields Manufacturing industrial .valves and fittings,Instrument sliding bearing. 1.purity 99.97%-99.99% 2.Weight of each sheet: 125kgs (+/- 1%) 3.Net weight of each pallet: 2mts (+/- 1%) 4.Min. weight in each container: 20mts approx. 5.Gross weight of each container: 22.20mts approx. 6.Dimensions: 914*914*12mm Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99. 99% Dimension: 970 MM X 970 MM X 9 MM Weight of each sheet: 100 kg. we can supply copper cathode Copper Cathode Grade A Purity: purity 99.99%-99.97% min Weight per Sheet:125kg....... Copper Cathode , Cu 99.95% Copper cathode Grade A Cu 99.95- 99.99 % 1.Weight of each sheet: 125kgs (+/- 1%) 2.Net weight of each pallet: 2mts (+/- 1%)
Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper Size: International standard A4: 210 x 297mm A3: 420x 297mm 8.5 x 11-inch (216 x 279mm) 8.5 x 14-inch (216 x 330mm) Key Performance: No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for : Photocopy Macchines, Laser Printers, Ink-jet Printers, Fax Machines
