13 X 100 Mm 6 Ml Bd Closure Plastic Tube Suppliers and Manufacturers

MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Application: Electric light industry, Machinery manufacturing, Building industry ,defense industry, Other fields Manufacturing industrial .valves and fittings,Instrument sliding bearing. 1.purity 99.97%-99.99% 2.Weight of each sheet: 125kgs (+/- 1%) 3.Net weight of each pallet: 2mts (+/- 1%) 4.Min. weight in each container: 20mts approx. 5.Gross weight of each container: 22.20mts approx. 6.Dimensions: 914*914*12mm Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99. 99% Dimension: 970 MM X 970 MM X 9 MM Weight of each sheet: 100 kg. we can supply copper cathode Copper Cathode Grade A Purity: purity 99.99%-99.97% min Weight per Sheet:125kg....... Copper Cathode , Cu 99.95% Copper cathode Grade A Cu 99.95- 99.99 % 1.Weight of each sheet: 125kgs (+/- 1%) 2.Net weight of each pallet: 2mts (+/- 1%)

Specification Material 100 Coconut Charcoal Ash Content 23 Moisture Max 7 Calorie Max 7700 kCalkg Burning Time 2 25 hours Smell No Odor No We can produce shisha briquettes according to the customers desired custom specifications Variants 20X48 mm 1kg 64pcs Min Order 1 X 20 FCL Packing inner plastic inner box master box full color Price 135

Specification Material 100 Coconut Charcoal Ash Content 225 Moisture Max 7 Calorie Max 7500 kCalkg Burning Time 2 25 hours Smell No Odor No We can produce shisha briquettes according to the customers desired custom specifications Variants 25X25X25 mm 1kg 72pcs 26X26X26 mm 1 kg 64 pcs Min Order 1 X 20 FCL Packing inner plastic inner box master box full color Price 1400ton FOB Jakarta Indonesia Prices are Negotiable

Specification Material 100 Coconut Charcoal Ash Content 23 Moisture Max 7 Calorie Max 7700 kCalkg Burning Time 2 25 hours Smell No Odor No We can produce shisha briquettes according to the customers desired custom specifications Variants 25X25X25 mm 1kg 72pcs 26X26X26 mm 1 kg 64 pcs Min Order 1 X 20 FCL Packing inner plastic inner box master box full color Price 1350ton FOB Jakarta Indonesia Prices are Negotiable

PRE ORDER / PRODUCTION FOB Thailand ( Laem Chabang Port ) KC 500; Nitrile Examination Gloves MOQ: 5 Million x 12 months MAX: 20M x 12 months Price USD8.00 KimTech; Nitrile Examination Gloves MOQ: 5 Million x 12 months MAX: 20M x 12 months Price USD8.20 *Including USD0.10 commission for buyer side *Sea Freight USD0.35 - USD0.50 CIF Payment terms : 1. SBLC as Warranty, amounting Half Value of First Month Delivery and or 2. Irrevocable Revolving Non Transferable Divisible LC with withdrawal % from the LC as deposit from the total amount of 1 month. Standing Operative Procedure; 1. NCNDA via Docusign 2. Buyer issues LOI, ICPO, LOA (if Proxy) and Proof Of Fund (*via Ready Willing Able or RWA Letter from the Buyer's Bank) for Fund verification, KYC 3. Within 24 to 48 hours of receiving the above Documents after verification, Buyer will be provided with a Draft Sales Purchase Agreement and LC Draft 4. Once the Buyer has reviewed the SPA, the Buyer and Seller will sign SPA - IMFPA. 5. Allocation Letter @ Authorization Letter will be provided thru the Zoom Meeting 6. Seller provides PI 7. Within 3 working days after the contract assigned, Buyer activate Letter of Credit @ Irrevocable Revolving Non Transferable Divisible LC to Seller with the following terms As Note given accordingly 2.5% - 10% payment withdrawn from the IRTLC for the deposit against Confirmation Letter from Factory and Invoice from Seller from the total amount of 1 month 90% - 97.5% will be withdrawn upon completion of SGS and ready for shipment for the First Month and 100% subsequently (to be confirmed by issuing bank) or value including the full purchase price plus the 2.5% - 10% one month sales for Deposit 8. PRODUCTION START 9. Seller provide delivery schedule from Factory within 10 - 15 working days after receipt of LC. If not Seller pay penalty 2.5% of 1 Month of Sales 10. Buyer provide SGS Inspection details to Seller to get approval from Factory for the Inspection 11. SGS is completed at the factory warehouse and after receive full payment the goods release from the Warehouse. 12. Seller released original documents to Buyer : Certificate of Origin, Packing List, Pro Forma Invoice 13. The Seller is responsible for the goods until they are loaded on a shipping vessel of which point all liability, risks, insurance and costs shifted to the buyer 14. TRANSACTION COMPLETE NOTE; 1.1Mil Deposit 10% 2. 5Mil Deposit 5% - 7% 3. 10M Deposit 3% - 5% 4. 20M Deposit 2.5%

Alfalfa Pellets Thank you for contacting us. We can offer best quality Alfalfa Pellets. Further, this is a 100% Natural Product grown and cultivated in Gujarat State of India, the nutritional specifications are subject to vary as no additions of foreign matters are made to increase/control the nutritional specification of the same. Available In : 8 x 25 mm We produce widest range of Alfalfa Pellets for Animal Feeding Objective. We produce 8� mm Alfalfa Pellet and 10� mm Alfalfa Pellet for Animal Feed Forage Industry Alfalfa Pelleting Process Generally its grown during the period of November to April Months of the year in India and the cutting process begins from the 45th� day of the plantation. The field cut green alfalfa is spread on the agriculture land for sun drying process (which is generally called sun curing process). This is the most important phase of administration, wherein during the sun curing process the alfalfa leaves and stem has to be dried in such a manner that the leaves should not turn yellow or loose green pigments. After 7 days of meticulous administration, the green alfalfa is converted in to hay. The hay is loaded in trucks and transported to production side, where the first stage is to sieve (clean) the entire hay, so minor or major dust articles are removed from the same. After cleaning process the hard stem particles are removed through a mechanical machining process and the available residue is absolutely clean and dehydrated soft leaves and soft steam. The dehydrated alfalfa particles (leaves & steam) are grinded to a finer particles size. The overall texture of hay is now converted to Powder Form. The powdered alfalfa is then passed through 100 degree Celsius stream for about 8 minutes, which detoxifies the alfalfa from any toxic elements and also gets cooked at a very digestible ratio. The highly cooked alfalfa meal is then pelleted through feed extrusion methodology, during the process of pelleting again the cooked meal reaches to an extremely high temperature of 123 Degree Celsius, due mechanical thrust of the extruder in its 22 ft long barrel The extremely hot pellets are then cooled down to a room temperature level, enabling the moisture level below 12%. The above process produces the most advance format of Alfalfa Hay Pellet in 8 x 25 mm�  and 6 x 25 mm size absolutely hygienic for Animal and Poultry feeding Purpose Facts of Indian Alfalfa The pricing of the alfalfa hay / pellet is totally dependent of the physical hay recovery after sun curing process, which varies 10% to 15%, which means when 100 Kgs of green alfalfa is sun dried, the hay recovery varies between 10Kgs to 15 Kgs. The recoveries are totally dependent on the environmental factor and the water content within the stems of the alfalfa. Countries like Canada, Northern US, New Zealand and Northern European Countries donâ??t get direct sun light (rather they get inclined sun lig

Scientific name Plukenetia Volubilis Linneo Ingredient - Sacha inchi Description - Extra virgin sacha inchi oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Nutritional Characteristics - Rich in polyunsaturated fatty acids: 48% Omega 3, 38% Omega 6 and 14% Omega 9. High protein content food (more than 50%). Rich in vitamin A (681 ug in 100 ml) and vitamin E (among 175.68 and 223.29). Sensory Characteristics Color Light yellow Smell Caracteristic Taste Caracteristic Texture Oily liquid Physicochemical Characteristics Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :