The FiberHTT HPBT3R2-LR single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-LR module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC
The FiberHTT HPBT2R3-LR single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT2R3-LR module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT HPBT3R2-L2 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-L2 module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT HPBT2R3-L2 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT2R3-L2 module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT HPBT3R2-L4 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-L4 module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT HPBT2R3-L4 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT2R3-L4 module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Quick details Place of origin:, guangdong, china (mainland) Brand name:, hdv Model number:, sfp+-10gb-1310-20km Data rate:, 10g Connector:, lc Distance:, 20km Wavelength:, 1310nm Certification:, rohs directive-compliant Compatible:, cisco, huawei , hp Warranty:, 3 years Temperature:, 0 to 70 Packing:, sfp Type:, sfp Packing and delivery Packing details: according to quantity, we can offer 1 by one in box, or 5 pairs in plastic box or 10 pairs and we can do as customer required Delivery time: shipped in 7 days after payment 10g sfp+ 20km, 1310nm, bidi transceiver module 10g base-lr, sfp+, transceiver, module, for, smf, , 1310-nm, wavelength, , lc, duplex, connector Ascent optics, 10g base, sfp+, modules, offer, customers, wide, variety, of, 10, gigabit, ethernet, connectivity, options, for, data, center, , enterprise, wiring, closet, and, service, provider, transport, applications Smallest, 10g, form, factor Supports, 10g base, ethernet, and, otu2/otu2e Hot-swappable, input/output, device, that, plugs, into, an, ethernet, sfp+, port, of, switch Provides, flexibility, of, interface, choice, Supports, pay-as-you-populate, model Supports, digital, optical, monitoring, capability Optical, interoperability, with, 10g base, xenpak, , 10g base, x2, and, 10g base, xfp, interfaces, on, the, same, link , 2. Main features , 1.10, 8, 4, 3, 2.5, 1.25g, 155m all rate , 2.Sfp+, xfp, sfp, sff, csfp are customizable , 3.Perfectly compatible with famous switch, cisco huawei , 4.Ddm , 5.Choice from single mode, muli-mode , 6.Choice from dual fiber lc, single fiber sc/lc , 7.Low power consumption and high sensitively , 8.Programmable of no light alarm function , 9.Complying rohs directive-compliant standard , 10.Working temperature
Quick details Place of origin:, guangdong, china (mainland) Brand name:, hdv Model number:, sfp+-10gb-1310-20km Data rate:, 10g Connector:, lc Distance:, 20km Wavelength:, 1310nm Certification:, rohs directive-compliant Compatible:, cisco, huawei , hp Warranty:, 3 years Temperature:, 0 to 70 Packing:, sfp Type:, sfp Packing and delivery Packing details: according to quantity, we can offer 1 by one in box, or 5 pairs in plastic box or 10 pairs and we can do as customer required Delivery time: shipped in 7 days after payment 10g sfp+ 20km, 1310nm, bidi transceiver module 10g base-lr, sfp+, transceiver, module, for, smf, , 1310-nm, wavelength, , lc, duplex, connector Ascent optics, 10g base, sfp+, modules, offer, customers, wide, variety, of, 10, gigabit, ethernet, connectivity, options, for, data, center, , enterprise, wiring, closet, and, service, provider, transport, applications Smallest, 10g, form, factor Supports, 10g base, ethernet, and, otu2/otu2e Hot-swappable, input/output, device, that, plugs, into, an, ethernet, sfp+, port, of, switch Provides, flexibility, of, interface, choice, Supports, pay-as-you-populate, model Supports, digital, optical, monitoring, capability Optical, interoperability, with, 10g base, xenpak, , 10g base, x2, and, 10g base, xfp, interfaces, on, the, same, link , 2. Main features , 1.10, 8, 4, 3, 2.5, 1.25g, 155m all rate , 2.Sfp+, xfp, sfp, sff, csfp are customizable , 3.Perfectly compatible with famous switch, cisco huawei , 4.Ddm , 5.Choice from single mode, muli-mode , 6.Choice from dual fiber lc, single fiber sc/lc , 7.Low power consumption and high sensitively , 8.Programmable of no light alarm function , 9.Complying rohs directive-compliant standard , 10.Working temperature
This Hengtaitong 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Transceiver SFP+ 1310nm 10G 10km LC Interface with DDM Commercial Temperature
Key Prameter Speed 10GBase-LR Wavelength 1310nm Distance 10km Interface LC Duplex DOM Support YES Media SMF Optical Componets DFB/PIN TX Power -8.2~-0.5dBnm RX Power < -14.4dBm Form Factor SFP+ Protocols MSA Compliant Temperature Range 0 to 70 (32 to 158)
16G SFP+ BIDI 1270/1330NM 10KM DDM optical transceiver Item NO.: ESBxxX6-3LCD10 Date rate: 16G Wavelength: 1270/1330nm Distance: 10KM Connector: LC DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.Supports up to 14.025Gbps bit rates/Hot-pluggable SFP+ footprint 2.Compliant with SFP+ MSA and SFF-8472 with single LC receptacle 3.Compatible with RoHS/ Single +3.3V power supply 4. Real Time Digital Diagnostic Monitoring 5.Operating case temperature:Standard: 0 to +70°C Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface 2.Switched backplane applications/Router/Server interface 3.Other optical transmission systems
Features Supports 9.95 to 11.3Gb/s bit rates Hot-Pluggable Duplex LC connector 1310nmDFBtransmitter, PIN photo-detector SMF links up to10km 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface Power Supply :+3.3V Power consumption
10G 1310nm SM 10KM LC SFP+ Transceiver Specification: Data rate:10G Wavelength:1310nm Distance:10KM Interface:LC Fiber:SM Place of origin:Made in China Port:Shenzhen Working temperature: Commercial:0°C to +70°C;Industrial:-40°C to +85°C Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Function:Photoelectric conversion module Scope of application: switch, Ethernet, data center, SDH, SONET, ATM
Tx-1310/rx-1490 nm single-mode bi-directional Sfp simplex connector 155 mbps sonet oc-3/sdh stm-1/125 mbps fast ethernet Features: Compliant with sonet/sdh standard Compliant with fast ethernet standard Industry standard small form pluggable (sfp) Package: Simplex lc connector Differential lvpecl inputs and outputs Single power supply 3.3v Ttl signal detect indicator Hot pluggable Class 1 laser product complies with en 60825-1
Features Up to 11.1Gb/s data rate 1270nm DFB laser and PIN receiver for HTSX-B273396Lx 1330nm DFB laser and PIN receiver for HTSX-B332796Lx 2-wire interface with integrated Digital Diagnostic monitoring Up to 10km transmission on SMF BIDI LC optical connector Single +3.3V power supply Metal enclosure, for lower EMI Maximum power consumption 1.5W RoHS-6 compliant and lead-free SFF-8472 MSA compliant &SFF-8431 Operating case temperature Commercial: 0 ~ 70oC Applications Back to Back 10GBASE-LR/LW 10G Ethernet
NETON SFP Bi-Di Transceiver Module with Single SC Receptacle Transmitter center wavelength: 1310nm, 1550nm Data rate: 155Mbps to 1.25Gbps QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc Power supply: single 3.3V Distance: SR, IR1, IR2, LR1, LR2 Operating temperature: 0C to 70C or -40C to 85C. NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications. Features of SFP Bi-Di Transceiver Module with Single SC Receptacle: 1.Transmitter center wavelength: 1310nm, 1550nm 2.Data rate from 155Mbps to 1.25Gbps 3.Single 3.3V power supply 4.Single SC receptacle 5.Distance SR, IR1, IR2, LR1, LR2 6.Monitoring interface compatible with SFF-8472 7.Operating temperature 0C to +70C or -40C to +85C. Applications of SFP Bi-Di Transceiver Module with Single SC Receptacle: 1.Ethernet 2.Fiber Channel 3.ATM 4.SONET OC-3/SDH STM-1 5.Switches 6.Routers 7.Other optic links. 10PCS Plastic Box, 10 Boxes Per CTN.
Tx-1310/rx-1550 nm single-mode bi-directional Sfp simplex connector (1000base-bx) 1.0625gbd fiber channel/1.25 gigabit ethernet Compliant with ieee802.3z gigabit ethernet Standard Compliant with fiber channel 100-sm-lc-l Industry standard small form pluggable (sfp) Package Simplex lc connector Differential lvpecl inputs and outputs Single power supply 3.3v Ttl signal detect indicator Hot pluggable Class 1 laser product complies with en 60825-1
Glsun SFP28-25G-BX10U DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength TX1270nm/RX1330nm Max Cable Distance 10km Connector Simplex LC Transmitter Type DFB BiDi Extinction Ratio 3.5dB Media SMF Power Consumption
Glsun SFP28-25G-BX10D DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength TX1330nm/RX1270nm Max Cable Distance 10Km Connector Simplex LC Transmitter Type DFB BiDi Extinction Ratio 3.5dB Media SMF Power Consumption
