Vertical wind turbine, no noise, low start-up wind speed, maglev structure, light weight; no-noise.
Parameter Rated power(W) : 10000 Rated voltage(DCV) : 240 Rated current(DCA) : 42 Rotor diameter(m) : 8.0 Blade material : GFRP Rotation direction : Clockwise Start-up wind speed(m/s) : 2.5 Rated wind speed(m/s) : 10 Cut-out wind speed(m/s) : 16 Survival wind speed(m/s) : 45 Net weight(T) : 1.0 Wind turbine type : Upwind Rated Rotating speed(RPM) : 180 Blades No. : 3 Hydraulic tower height (m) : 12 Yaw mechanism : Electrical Annual yield(kwh) : 24000 Yaw mode : Auto/manual Efficiency : 0.85 Wind turbine tilt-angle : 6¡ã Protection mode : Yaw -Hydraulic brake -Dumpload. Plywood cases and weave bag.
Numbers of blade(P): 3 Materials of blade: FRP complex resin Diameter of wind turbines(m): 8.0 Startup wind speed: 3 Rated wind speed(m/s): 10 Working wind speed (m/s): 3-25 Max. wind speed(m/s): 45 Rated speed(rotate/minute): 220 Wind energy ratio(%): 0.42 Generator: Permanent magnetic generator Generator rated power(W): 10000 Max.output power(W): 12000 Output voltage(V): 240vDC/360vDC Rated current(A): 25.3 Timing manner: Automatically adjust the windward angle Over speed Protection: AutoFurl Temperature Range: -40 ~ +60 Deg.C Tower: Guy wire type/ Free standing type Altitude of tower(m): 12/11.5 Charging control: Automatic Weight (kg): 1200 Power generation of years(kwh): 50000 Inverter power supply: Square wave Time of charging(h): 20 Battery: 12v200AH X40pcs Generator: 133*106*141cm Blade:402*33*52cm Tower: (400*38*38cm)*3 Inverter:74*47*65cm Controller: 70*60*91cm False ogive:88*85*64cm Accessories: 106*54*47cm
Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines.
Vertical wind turbine, no noise, low start-up wind speed, maglev structure, light weight; no-noise.
Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Main Parameter: Model: TR8.0-10KW Rated Power: 10KW Max Power: 12KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 8.0m Rated Rotor Speed: 180r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Output voltage(on-grid): dc 50-375v Output voltage(off-grid): dc 110v Over speed protection & braking system: Speed control style: pitch control system Brake style: automatic hydraulic brake Advantages of vawt: Nearly quiet Birds friendly More safety features Wonderful performance at low wind speed Captures wind from all directions Longer working life Less maintenance Less requirements on foundation Advantages over other vawt: High efficiency Pitch control to govern speed Automatic hydraulic brake 2375kg
FD8.0-10KW Technical Parameter: Power : 10KW Blade Diameter: 8.0m Rated Rotor Speed: 160r/min Rated Speed: 10m/s Rated Power: 10KW Max Power: 14kw Output Voltage: 380v Start Up Wind Speed: 3(m/s) Work Speed: 3-20(m/s) Security Wind Speed: 40(m/s) Working Temperature : -40--+40 Height of Guy Cable Tower: 12m Generator Style: 3-phase AC PM Output Controller System: Controller , Inverter Suggested Batteries and its Capacity: 30pcs 12v 200AH. Can Supply Power for: Small Village,Air-Condition, Refrigerator, Washing Machine,Water Pump, Electric Pan, Color TV, Lighter, Fanner, Charger. Controller & inverter: Model: WWS100A-220 Rated Wind Turbine Power: 10kW Rated Solar Power: 3kW Rated Battery Voltage: 220V Wind Turbine Maximum Input Current: 90A Wind Turbine Maximum Input Power: 20KW Unload Voltage factory default : 252 V Unload Current factory default : 40A Control Mode: PWM Display Mode: LCD Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current , PV Voltage, PV Charge Current, PV Power, Battery Voltage Working Temperature &Humidity: -20~+50 /35~85%RH Without Condensation Temperature Compensation optional : 4mV/ /2V , 35 --+80 , Precision 1 Communication Mode optional : RS232, RS485, RJ45, GPRS. Etc Protection Function: Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection ,Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake. Model: WI100-220-S Rated Output Capacity : 10kVA Rated Battery Voltage : 216VDC Over Voltage Shutoff: 306VDC Over Voltage Recovery: 297VDC Under Voltage Shutoff: 189VDC Under Voltage Recovery: 216VDC No Load Loss: 0.55A Output Wave Form: Pure Sine Wave Display Mode: LCD Display parameters: Battery Voltage, Output Voltage, Status parameters Cooling Mode: Fan Rated Output Voltage: 110/120/220/230/240VAC Wave Distortion: 4 Output Frequency: 50/60 Hz0.05Hz Dynamic Response: 5% Overload Capacity: 120% 1min,150% 10s Inverter Efficiency: Maximum 90% Noise 1m : 40dB Insulating Strength: 1500VAC,1min Protection Function: Battery over voltage protection, Battery under voltage protection, Battery reverse connection protection, Output overload protection, Output short circuit protection, Overheating protection. Working Ambient Temperature: -20¡«50 Working Altitude: 4000m Working Ambient Humidity: 0~90%, no condensing. in plywood.
basic parameters rated power(kw) 10 survivel wind speed(m/s) 45 max power(kw) 11 wind wheel diameterm(m) 7.6 rated voltage(v) 384/560 blade length(m) 3.8 rated revolution(r/m) 200 swept area(m2) 45.34 cut-in speed(m/s) 1 blade material FRP cut-off wind speed(m/s) 25 generator life 20 sone key technology control method adjust speed method centrifuge variable pitch brake method electromagnetic generator generator configuration 3-phase 380/220v 50/60hz generator type 3-phase permanent magnet protect class
Rated power: 10kw Rated wind speed: 12m/s Cut-in speed: 4m/s Cut-out speed: 25m/s Subsistence wind speed: 55m/s Mill diameter: 6m Mill height: 6.2m Mill weight: 2375kg Tower height & weight: 5.5m (1000kg) Generator type: pmg 3 phase Generator rated voltage: ac 250v Generator rated current: ac 23a Generator protection level: ip54 Controller output voltage (on-grid): dc 80-400v Controller output voltage (off-grid): dc 110v Governed speed style: aerodynamic pitch control Brake style: automatic brake system
Rated Power: 10kw Rated Wind Speed: 12m/s Cut-In Speed: 4m/s Cut-out Speed: 25m/s Subsistence wind speed: 55m/s Mill Diameter: 6m Mill Height: 6.2m Mill Weight: 2375kg Tower Height & Weight: 5.5m (1000kg) Generator type: PMG 3 phase Generator Rated Voltage: AC 250V Generator Rated Current: AC 23A Generator Protection Level: IP54 Controller Output Voltage (On-grid): DC 60-375V Controller Output Voltage (Off-grid): DC 110V Governed Speed Style: Aerodynamic Pitch Control Brake Style: Automatic hydraulic Brake system Mill Weight: 2375kg
TL-10KW's parameters and quotation rotor diameter£¨m£©7speed adjustment wayelectromagnetism plus drift blade materialintensive fiberglassstop wayelectromagnetism plus manual operation blade quantity3generator typepermanent magnetism of three-phase current rated speed(m/s)12rated power10KW start up wind speed(m/s)4max power15KW work speed(m/s)4-35rated rotor speed(r/min£©220 security wind speed(m/s)45work voltageDC120V-500V start up force moment(n/m)7.5weight of main body£¨kg)1200.
Rated power(w) 10000 Maximal power(w) 15000 Rated rotation(rmp) 180 Starting torque(n/m) 7.5 Reted speed(m/s) 10 Cut-in speed(m/s) 3 Normal working speed(m/s) 4-25 Shut down(m/s) 50 Normal output voltage(dc) 500 Optional output voltage(dc) 240-500 Optional minimum outpvoltage(dc) 240 Blade diameter(m) 8 Blade material enhanced frp Number of baldes 3 The weight of the main power(kg) 600 The height of the tower(m) 15 (tower)f¯wall thickness(mm) ¬)273f¯5 The weight of the tower(kg) 660 Recommended battery capacity(ah*n) 12v*150ah*42 Export packing standards
MEGATRO is now offering different types of wind generators with competitive price, which including two types, vertical and horizontal type. It is used of wind energy in the wind farm, Energy Company and other fields. MEGATRO wind-driven generator, is one kind of electro-mechanical device that can transformed wind energy into the mechanical energy, then again transforms them into the electrical energy. It uses the wind power, gathers them to the battery charging and saves the electrical energy. Besides, it also gather the electrical energy transformation and alternating current supply which voltage and hertz is 220V/50HZ ,110V/60HZ,230V/50HZ. It has the advantages of no need the fuel and can't produce pollution and noises. And it has high efficiency and good low-speed, the speed regulating system adjusts automatically to wind speed, the whole system is easy to install and convenient to maintain. It is generally suitable for the areas when the wind resources are rich. And it is widely used in the areas when the electricity is not sufficient or the electrical network is not normal. The main applied fields are as follows: air conditioning refrigerator, the washer, the illumination, the television, the searchlight, the communication equipments, the power tool and others. Our wind generator' main parameters and sizes are as follows: 1 Machine Pattern: The horizontal (or vertical) axis approaches against the wind 2 Leaf Blade Pattern: Propeller 3 Leaf Blade Number: 3 pieces 4 Wind Wheel Diameter: 2.0 m, 2.5m, 2.6m, 2.8m, 3.2m, 4.0m, 5.0m, 7.0m, 8.0m, 12.0m. 5 Rated Speed: 160----400 revolutions/Minute, 6 Rated Power: 150W, 200W, 300W, 600W, 1000W, 1500W, 2000W, 3000W, 5000W, 10KW, 20KW, 30KW, 50KW 7 Working Voltages: 12V, 24V, 36V, 48V, 60V, 96V, 108V, 220V, 380V, 420V 8 Matches the accumulator cell: 480V, 9 Starting Wind Speed: 3.0 meters/ Second 10 Design Wind Speed: 8~ 9 meters/ Second 11 Operating Region: 3~20 rice/ Second 12 Hand of Rotation: Clockwise (face wind wheel) 13 The Wind cans the utilization factor: 0.4 14 High Speed Ratios: 6: 1 to 8: 1 15 Velocity Modulation Way: Leaning tail + electric brake 16 Sets Up an Altitude: 6-9meters Place of Origin: Qingdao, Shandong, China. Availability size: Based on the customer's requirements. Fabrication: Based on the customer's requirements and other technical data agreed by both parties. Package: packed with wooden case Terms of Payment: L/C, T/T Minimum Order Quantity: 1sets Port of Loading: Qingdao Port Delivery Time: one month or based on the customer's needs. Export standard package or as per client
In turkey we are producing high quality wind turbines .Please ask for our catalogs for detailed information. Tower type: composite coating over steel lattice Tower weight :18t Rotor blade type: horizontal axis, 3 blades
150w, 300w, 600w, 1kw, 2kw, 3kw, 5kw.10kw, 20kw, 30kw, 50kw, 100kw.
Power: 50W Rotor diameter: 700mm Height of blades: 600m Material of blades: Glass Fiber Reinforced Plastic Number of blades: 5 Rated rotor speed: 120r/min Rated wind speed: 7-10m/s Start-up wind speed: 1.3m/s Work wind speed: 1.3-25m/s Survival wind speed: 50m/s Output voltage: AC12V Packing size: 660, 350, 280mm Weight: 15KG.
Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets. More information on requests, for spam protection please introduce yourself properly. Main data of one mill: Manufacture’s type: NTK 130F/LM Year of manufacture 1988 Total operating hours: approx. 75000 Rated capacity, max: 145 kW Number of blades: 3 pcs Rotor diameter: 22 m Rotor speed: 44.5 rpm Cut-in wind speed: 4.0 m/sec Cut-out wind speed: 53 m/sec (120 mph) Hub height: 26 m Generator: ASEA 145 kW / 1500 rpm / 50 Hz Blade type: LM 9.7 m H/H/T diam. 21 m Gear box type: Lohman & Stolterfort GPC 145 Clutch type: Lohr & Brokamp Universal Joint No 105 Total weight: 15200 kg.
250KW Wind turbines.
