100% interchangeable with the most common brands of mud pumps.
Long lasting service life up to 4000 hours.
Could be used around 7500 psi of working pressure.
Also provide reliable Liner packing Seal Rings.
Customized Liners according to drawings can be produced, too.
Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions
Use
Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry.
Quality Standard
Item Standard BP2000
Appearance purple noodle crystal
Purity 99.3% min
Chloride 0.01% max
Sulfate 0.05% max
Insoluble matter in water 0.15% max
Moisture 0.5% max
As 20 ppm max
Cd 50 ppm max
Cr 50 ppm max
Hg 10 ppm max
Pb 50 ppm max
Se 50 ppm max
Ni 50 ppm max
Sb 50 ppm max
Packing and Storage
Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.
Red cubes International has more than 20 years of experience in the charcoal industry. supplying the best quality products to many major companies worldwide.
Here we shared Sawdust charcoal briquette details and specifications ;
Fixed Carbon - Above 80%
Ash Content - Below 5%
Volatile Matter - 12% to 14% Max
Moisture - 5% Max
Gross Calorific Value - 7200 to 7500 Kcal/kg
Burning Time - 6 to 7 hours
Packing - 10 kgs packing with inner PP liner in printed
Master carton boxes
Loading Capacity - 27 Metric Tons in 40 feet container
Advantage - Long Burning Time, No Smoke, No Odour, No Spark
100% Natural & Eco-friendly.
Container - 20 feet & 40 feet container
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT
DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life.
SPECIFICATIONS
1. Appearance: Off white Granules
2. Solubility: Soluble at 800C
3. Viscosity of 4% solution: 10 to 30 cPs
(Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc)
4. Ash content (w/w) : Max 3%
5. Bulk density (gm/ml) : 0.65 to 0.85
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually sprinkle SizeMagikTM-LP4.
3. Add the required quantity of softener.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
ECONIMICAL ADVANTAGES
Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
Science name: Citrus japonica.
Color: Brown yellow.
Origin: Vietnam.
Moisture: 12% max.
Size (mm): 2x2.5, 2x4, 4x6.
100% Natural. No impurity.
No SO2, no CO2, no Additives, no Preservatives.
Quantity capacity: 50 tons/month. MOQ: 5 tons.
Packaging: in carton (PE liner), as buyer's requirement.
Noni has traditionally been used for colds, flu, diabetes, anxiety, and high blood pressure, as well as for depression and anxiety.
Feature: 100% pure, no additives, no preservatives
Color: Natural Red Brown
Moisture: 8 - 12% max
Origin: Vietnam
Packing: In 25kgs PP/carton with PE liner, 20FCL=7tons
Origin: Vietnam.
Color: Brown yellow.
Moisture: 12% max.
100% Natural. No impurity.
No SO2, no CO2, no Additives, no Preservatives.
Quantity capacity: 50 tons/month. MOQ: 5 tons.
Packaging: in 10 kg NW carton (PE liner).
Price: please contact for updated price.
Payment & delivery: L/C at sight or T/T 30% in advance. Lead time: 2 weeks/ 1*20'FCL.
Shubhlaxmi Industries is a pioneer manufacturer/processor and exporter of Psyllum Husk. We provide husk fiber globally keeping its freshness and goodness intact.
The botanical name of Psyllum husk is Plantago Scraba. It is a member of a plant name Plantago. It is commonly known as isabgol. Psyllum Husk is the outer portion of the seed of the plant. It is extremely hygroscopic hence it can absorb water much more than its weight. It has been originated from Mediterranean region but nowadays it is cultivated in North Gujarat, West Rajasthan and some states of North India.
Basically, Psyllum husk is very old herb that is used since ancient time as laxative. It is completely natural anti diarrheic. It is very fibrous; it throws toxins out of the intestine and stomach. It is top herb that is used in weight control. It is used for thickening ice cream. It is generally consumed after soaking it in the water.
Specification
HS Code : 012119032
Grade : 99% 98% 95% 85% powder 99%
Moisture 12% Max 12% Max 12% Max 12% Max 12% Max
Total Ash 4% Max 4% Max 4% Max 4% Max 4% Max
Acid Insoluable Ash 1% Max 1% Max 1% Max 1% Max 1% Max
Light Extraneous Matter 1% Max 2% Max 5% Max 15% Max 1% Max
Swell Volume 40 Ml/gram Max 40 Ml/gram Max 40 Ml/gram Max 35 Ml/gram Max 40 Ml/gram Max
Insect Fragments Per 25 Gram 100 Parts Max 100 Parts Max 100 Parts Max 100 Parts Max na
Salmonella Per 10 Gram absent absent absent absent absent
E.coli Per Gram absent absent absent absent absent
Yeast And Mould Per Gram 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max
Packing : 25 Kg Netpaper Bags With Inner Food-grade Poly-liner
Quality Assurance : Sgs, Geo Chem,eu Standards,usfda
Origin : Gujarat, Rajasthan, Madhyapradesh
Loading Capacity : 11mt In 20'fcl & 26mt In 40'fcl
During last decade Guar has immerged as an important industrial raw material and Produced by man for thousands of years. India has been the single largest producer and exporter of Guar gum accounting for more than 80 percent of the global output and trade.
Guar has now assumed a larger role among the domesticated plants due to its unique functional properties.
India Ranks First in the production of guar which is grown in the North Western part of the Country which mainly includes the states of Rajasthan, Gujarat, Haryana and Punjab. Other main countries are Pakistan, U.S.A and Brazil
The by-product of Guar Gum industry consisting of the outer seed coat and germ material is called guar meal. The Guar meal after gum Extraction is a potential source of protein and contains about 42% crude protein which is one and a half times more than the level of protein in guar seed. The protein content in guar meal is well comparable with that of oil cakes. It is used as a feed for livestock including poultry. Guar meal contains two deleterious factors i.e. residual guar gum and trypsin inhibitor, Toasting of Guar Gum improves its nutritive value in chicks. Toasted guar Meal can be used in limited quantity i.e. Up to 10% in Poultry diet. However it can replace groundnut cake by almost 100% in animal feeds.
Guar Gum (Galactomanan) is a high molecular weight carbohydrate polymer made up of a large number of mannose and galactose unit linked together. The crude Guar Gum is a greyish white powder 90% of which dissolves in water. It is non ionic polysaccharide based on the milled endosperm of the guar bean whose average.
Composition is:
Hydrocolloid: 23%
Fats: 40%
Proteins: 34%
The most important property of the Guar is its ability to hydrate rapidly in cold water to attain a very high viscosity at relatively low concentrations. Its specific colloidal nature gives the solution an excellent thickening power which is 6 to10 times thicker than that obtained from starch. It is stable over a wide range of PH and it also improves the flow ability and pump ability of the fluid. It is a superior friction loss reducing agent.
WHITE PAPER SCRAP, OCC, ONP, OINP, OMG, A4 WASTE OFFICE PAPER
Place of Origin : JAPAN, US, EUROPE
Materials : Post consumer grade
Consists of corrugated containers having liners of either test liner, jute, or kraft. Prohibitive materials may not exceed 1% Outthrows plus prohibitives may not exceed 5%
Type ; OCC, ONP, OINP, SOP, Mixed Paper, Hard Whites Paper, White Ledgers Paper, White Envelope, Soft White Paper etc.........
Color : Mixed
Unit : Ton/Tons
Minimum Order : 20 Tons
Payment Term : T/T 50/50 and L/C 100% at sight
Shipping Lines : Ocean
Estimate Lead Time : 15 - 20 days
Shipping Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach
Supplying Capacity : 200 tons/month
Packaging : Pack in bales, weight 20-23MT per 40HQ container
PC-GF 20% regrind black color - Origin Japan has been processed into plastic particles, which are very convenient for transportation as well as in the recycling process to create new products. We always provide the same products as reality, and we use 100% real images.
Technical applications
If you do not know what common applications of PC plastic are, in addition to the use of food containers, drinking cups, bottles or travel suitcases, PC plastic is also used in engineering fields such as making dashboards. control and system of pipes or cardboard for writing liner, bulletproof glass, spare parts for slide show equipment. However, with technical application, PC plastic has certain disadvantages with low durability, so it is only suitable as accessories.
MATERIAL: PC-GF 20% regrind black color
CATEGORY: PC-GF 20%
TYPE: regrind
GRADE: black color
SPECIFICATION: From sheet and It's a part of an electrical appliance
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 600$ - 900$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
V4 Borewell Submersible Pumpset
Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and
Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP)
- Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply.
Single Phase available in 0.5 HP to 5.0 HP
Three Phase available in 1.0 HP to 6.0 HP
- Speed : 2880 RPM
- Head Range : 10 Mtr. To 340 Mtr.
- Discharge Range : 450 LPM to 12 LPM
- Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0
- Degree of Protection : IP 58
- Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph
- Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs,
2.2kW, 7.5 kW -1500 lbs.
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph
Direct Online (D.O.L)
- Maximum Starts Per Hour : 20 Times
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.
Salient Features
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series
- 20 Mtr. Head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust
loads
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS Pumps are available
Specification
Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph
- Power Range : 7.5 kW to 75 kW (10 HP to 100 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Thrust Load : 7.5 kW -30 kW -10000 lbs
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 440 Mtr.
- Discharge Range : 2400 LPM to 300 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : Star Delta (SD)
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor
Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1
material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass
MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
