Light duty lathe machines are generally lathe machines of small size with a swing of 10 inches or less, mounted to a bench or table top. The light duty lathe machines are made of quality tested material and is used in electronic, electrical and automobile industries. The light duty lathe machines can be used in almost all machining jobs but may be limited due to the size of the material that can be turned.
Anti burnback feeding system: pellets feeding system adopt double stage screw feed. The first stage is for controlling the pellet feeding quantity to make sure enough pellet fuel. The second stage makes sure there is no excess pellet in the feed screw. So it is blank between the first stage and the second stage. There is no back-fire happen and make sure the safety operation. Through reducing the load of feeding system, the wood pellet boilers feeding device will have fewer fault. Intelligent control: we adopt microcomputer one-button operation, automatic feed automatic ignition, with the setting temperature, start and stop cycle, and fault alarm function, simple and easy operation. Advanced combustion system: adopt patent inside wood pellet burner, adopt special three side air supply system, which makes sure the pellet full combustion. Equipped heat recovery device makes the boiler efficiency can reach 92%. Safety operation: anti-back fire feeding system, temperature sensor, low water level protection device, over-temperature protection device. Easy to maintain: wood pellet hot water boilers belong to atmosphere hot water boilers. There is no need for professional stoker. It is automatic wood pellets feeding and automatic ignition. User just needs to add 1-2 times fuel per day. Ash cleaning is very easy, user just needs to take out of the ash bucket at the bottom of the chamber. Cost saving: wood pellet hot water boilers operation cost is just 1/3 of diesel oil hot water boilers and 1/5 electric heating hot water boilers. Http://www.Romiter.Com Http://www.Ceboiler.Com Http://www.Steam-generator.Com
G the past ten years, our company is developing quickly and stably at the annual growth speed of 100%. We sincerely welcome all customers to contact and visit us to build long-term business relationship. Service 1.Our own qc staffs to check the quality strictly before delivering for our clients. 2.Detailed introductions make you understood, and make you to operate all the machines easily 3.If need professional engineer will go to your plant to set the machine for you until it operates very well 4.If there was something wrong with the machines, we promise it will be solved within 24 hours Now we are purchasing agent of many customers all over the world. Purchase almost everything for them. We have lots of experiences of purchasing. Low cost and good quality is our target Plywood
Technical Data K5-320 K5-400 Planer Max. Planer Width mm 320 400 Work Table Length mm 1560 1920 Max. Planing Thickness mm 4 4 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Cutter Shaft Dia. mm 86 86 El. Motor Power kW 2.2 3 Thicknesser Max. Planer Width mm 320 400 Work Table Length mm 550 690 Max. Planing Thickness mm 180 220 Max. Planing Heigh mm 3 3 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Feeds m/min 8 8 El. Motor Power kW 2.2 3 Boring Device Table Dimensions mm 400/250 (500) 400/250 (500) Longitudinal Travel mm 100 (150) 100 (150) Cross Travel mm 100 (150) 100 (150) Vertical Travel mm 100 (150) 100 (150) Max. Drill Dia. mm 16 16 Drill Speed R/min 5200 5200 Spindel Moulder Spindle Diameter mm 30 (50) 30 (50) Spindle Speed R/min. 6000 6000 Vertical Stroke of Spindle mm 130 130 Max.Ttool Diameter mm 170 170 Dimensions Of Worktable mm 850 / 450 850 / 450 El. Motor Power kW 2.2 2.2 Circular Saw Saw Blade Diameter mm 300 300 Saw Blade Speed R/min. 3700 3700 Max. Depth Of Cut mm 85 85 Dimensions Of Worktable mm 850 / 450 850 / 450 Spindle Dia. mm 30 30 El. Motor Power kW 2.2 2.2 or 3 Tenoning carriage Dimensions of worktable mm 450/750 450/750 Machine dimensions Net weight of the machine Kg 540 580 Length mm 1600 2000 Width mm 1140 1700 Height mm 1000 1100
Circular saws Cutters Cutter heads Shank cutters And many others by customer’s request.
Technical characteristics FU 251M FU 301 FU 321M FU 361 FU 401 Table size mm 250x1120 300x1250 320x1350 360x1500 400x1600 “T” slots – number x size mm 3x14 5x14 5x18 5x18 5x18 Table swivel – left and right (º) 45 45 45 45 45 Longitudinal table travel - manual mm 820 950 1000 (1250)* 1150 (1250)* 1250 - automatic mm 800 930 980 (1230)* 1130 (1230)* 1230 Cross table travel - manual mm 280 320 360 360 360 - automatic mm 260 300 340 340 340 Vertical table travel - manual mm 410 410 460 460 460 - automatic mm 390 390 440 440 440 Max. Distance from table top to spindle axis mm 440 440 490 490 490 Spindle nose taper ISO 40 40 50 50 50 Number of spindle speeds 18 18 18 18 18 Spindle speed range rpm 40-2000 (50-2500)* 40-2000 (50-2500)* 32-1600 (40-2000)* 32-1600 (40-2000)* 32-1600 (40-2000)* Number of table feeds 18 18 18 18 18 Table feed rate - x,y mm/min 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** - z mm/min 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** Table rapide traverse mm/min 2500/1040 2500/1040 2500/1040 2500/1040 2500/1040 Main motor power kW 4 5.5 7.5 7.5 7.5 Feed motor power kW 1.5 1.5 2.2 2.2 2.2 Machine weight kg 1975 2025 2850 2900 2925 * - option Note: All the milling machines could be manufactured with control of the movement of the axes by joystick, and frequency adjustment of the feeds
The feed pellets have smooth surface, suitable density and higher curing degree. The machine can make starch pasting, protein coagulating or denaturizing, and improve the nutritional quality of feed pellets, easy to digest and absorb, meanwhile kill the pathogenic germ and parasite. Technical parameters Model,Power(kw),Diameter(mm),Capacity(kg/h),Temple diameter(mm),Dimension ,Weight(kg) Yskj120,2.2-3,¦µ2.5-¦µ6,80-100,120,600*450*900,50 Yskj150,4,¦µ2.5-¦µ6,100-300,150,750*350*850,110 Yskj200,5.5-7.5,¦µ2.5-¦µ8,300-500,200,1150*530*750,150 Yskj250,11-15,¦µ2.5-¦µ8,400-700,250,1250*600*850,200 International standard seaworthy case or iron case
The feed pellets have smooth surface, suitable density and higher curing degree. The machine can make starch pasting, protein coagulating or denaturizing, and improve the nutritional quality of feed pellets, easy to digest and absorb, meanwhile kill the pathogenic germ and parasite. Technical parameters Model,Power(kw),Diameter(mm),Capacity(kg/h),Temple diameter(mm),Dimension ,Weight(kg) Yskj120,2.2-3,¦µ2.5-¦µ6,80-100,120,600*450*900,50 Yskj150,4,¦µ2.5-¦µ6,100-300,150,750*350*850,110 Yskj200,5.5-7.5,¦µ2.5-¦µ8,300-500,200,1150*530*750,150 Yskj250,11-15,¦µ2.5-¦µ8,400-700,250,1250*600*850,200 International standard seaworthy case or iron case
The feed pellets have smooth surface, suitable density and higher curing degree. The machine can make starch pasting, protein coagulating or denaturizing, and improve the nutritional quality of feed pellets, easy to digest and absorb, meanwhile kill the pathogenic germ and parasite. Technical parameters Model,Power(kw),Diameter(mm),Capacity(kg/h),Temple diameter(mm),Dimension ,Weight(kg) Yskj120,2.2-3,¦µ2.5-¦µ6,80-100,120,600*450*900,50 Yskj150,4,¦µ2.5-¦µ6,100-300,150,750*350*850,110 Yskj200,5.5-7.5,¦µ2.5-¦µ8,300-500,200,1150*530*750,150 Yskj250,11-15,¦µ2.5-¦µ8,400-700,250,1250*600*850,200 International standard seaworthy case or iron case
Biomass energy fuels: the pellets made by our pellet mills have high density and high combustion value. The pellet specifications can be adjusted at will through changing dies holes diameter. Organic fertilizer: through the adjustment of die reduction ratio the fertilizer pellets can make the temperature high instantaneously during machine working, reach the standard of low temperature making pellets ( below 60¡æ), so can make the organic fertilizer, bio-fertilizer, compound fertilizer and other low temperature material pelleting. International standard seaworthy case or iron case
The feed pellets have smooth surface, suitable density and higher curing degree. The machine can make starch pasting, protein coagulating or denaturizing, and improve the nutritional quality of feed pellets, easy to digest and absorb, meanwhile kill the pathogenic germ and parasite. Technical parameters Model, power(kw), diameter(mm), capacity(kg/h), temple diameter(mm), dimension , weight(kg) Yskj120, 2.2-3, ¦µ2.5-¦µ6, 80-100, 120, 600*450*900, 50 Yskj150, 4, ¦µ2.5-¦µ6, 100-300, 150, 750*350*850, 110 Yskj200, 5.5-7.5, ¦µ2.5-¦µ8, 300-500, 200, 1150*530*750, 150 Yskj250, 11-15, ¦µ2.5-¦µ8, 400-700, 250, 1250*600*850, 200 International standard seaworthy case or iron case
Working principle of sawdust machine: The blade cutting and high-speed airflow impact, collision double crushing function in an organic whole, and can finish at the same time the material sorting processing operations. In the blade cutting in the process of crushing, rotor produce high-speed airflow, along with the blade cutting ways, materials in the air flow speeds up, and again at the same time make the material by double pieces, and speed up the material crushing rate. Wooden cases, as for specification, you could visit our website www.Chinawoodgrinder.Com
Wood chipper is the production of a kind of special equipment of wood, wood cutting piece of machine also called as the raw material of man-made board. Working principle : By feeding port into wood, when wood is as a contact to peel and cut the blade, as peel and cut the knife dish to peel and cut the high-speed, peel and cut pieces in the peel and cut indoor peel and cut the knife dish by the wind leaf generated steam flow speed is sent out finally. Wooden cases
Drum chipper is the special equipment for the preparation of all kinds of high quality wood .It was used in paper factory, particieboard factory, chipboard factory of wood production and export base. The machine can cut log wood into sis, cut piece of blade and electronic component, the machine need to adjust the peel and cut the blade, the according to production of different specifications and thickness of the wood. Working principle of drum chipper: Wood was sent into the inlet, when the wood was a close to peel the cutting blade, with the high-speed as peel and cut the knife dish to peel and cut, peel and cut pieces in the peel and cut the wood peel and cut the knife dish by the wind leaf generated with steam flow speed is sent out. Wooden cases
Skj series flat die pellet mill Skj series small pellet machine is with flat die and two rollers. They are generally for home use, especially for pressing feed pellets. 1.The flat die small pellet machine can press 2.5-6mm diameter animal feed pellets, such as grain, corn, soybean, wheat etc. 2.The die and rollers are handled by heat treatment, which increase the abrasive resistance, prolong the die and rollers lifespan. 3.It can be driven by motor and diesel engine in order to meet different customers' demands. 4.High capacity, low energy consumption and easy operation with ce iso. 5.Feed pellets have smooth surface, appropriate hardness, high degree of inner curing which could lead to starch pasting and protein solidification, improved nutritive quality of feed, easy digestion and absorption, as well as the death of common pathogenic germ and parasite. 6.Pellet diameter could be adjusted at will by replacing die. Model Output(kg/h) Skj105 50-80 Skj120 80-100 Skj150 150-200 Skj200 200-300 Skj250 250-500 Skj320 700-1200
Model sl1350/3 sl1350/4 Max working length 1350mm 1350mm Max working diameter 360mm 360mm Final log core 40mm 40mm Veneer thickness 0.8-3.0mm 0.8-3.0mm Veneer output speed 42m/min 42m/min Total power: 21.7kw 20.6kw Weight: 7500kg 7000kg Dimension: 3450*1950*1700mm 3380*1900*1600mm 7500kg/12cbm 7000kg/10.5cbm
Cotton seed skins, rank grass, other crops st
Mzlh series wood pellet machine is high precision gear drive ring die wood pellet machine, this machine use switzerland ¡¡ãskf¡¡à high quality bearing, ensure high-efficiency, stable and low noise drive, can work alone with its electric cabinet.It can used in all kinds of large, middle and small factory to make biomass pellet to burning to keep warm in the cold winter, for raw materials, it can be raw wood tree, grass, straw and so on, the finished pellets with high density, and high heat value, burning time is longer than raw wood, it is an energy saving technology in the world. 1.Machine model:america cpm
The drive parts of the machine use the high-quality bearing and oil seal imported from switzerland and japan to assure high efficient driving, stable running and low noise. Longer and wider stainless steel conditioner with wide-open door for cleaning. Axial adding steam is adopted to replace the traditional radial adding. Structure is novel, compact and safe. Low noise and breakdown. High-performance permanent magnet device. Various safety overload protection device and warning signs are complete. In steel pallet.
Features Adopt international advanced technology, well-designed. Grind chamber is tear-circle type, effectively eliminating the circulation during the grinding to reach high output. Fully optimized the arrangement of hammer, space between hammer and screen is adjustable, to achieve the conversion of ordinary and fine grinding. Various precise checkouts including high-precision dynamic balance can ensure steadier operation, less noise and better performance. Key part is imported to make the usage life longer and maintenance cost lower. Movable full-opening operation door, coordinated pressure screens, to make the operation more humanized. Special process of hard alloy hammer. In steel pallet.
