Material: Steel
Usage: The stainless steel trusses up bringing, the international advanced technology, import equipment and material adopted are manufactured. It is it take, is it form a complete set object regular, truss up, tighten, install use new-type to fasten the fixture to deduct to pitch to pitch.
Application: No matter on the land, the ocean or the sky, no matter industry, agriculture, transportation, communication, electricity, chemical industry, traffic, urban construction, etc, are used in eac field extensively.
Features:
1 Current:300A---6000A
2 Protection degree:IP54
3 sandwich-type compact structure design
4 Low impedance
5 Low voltage drop
6 High dynamo thermal stability.
Description:
The reasonable sandwich-type compact type structure design keeps for a total length and increases system dynamo thermal stability which makes busway have the low impedance and low voltage drop features.
Note: It is strictly prohibited that there is water enter enclosure and conductor after installation, thus anti-water hydrant have to be added on the well-hole.
PE grounding conductor is extremely important for safety if big current is required. Both economic enclosure earthing configuration and dedicated PE conductor is available for customer. But the section surface of PE grounding system have to exceed 50% that of phase conductor.
CCX-II busway adopts complete closed structure with max protection degree IP54. 100% metal enclosure can be used as shortest and reliable grounding system to guarantee operation safety. Vertical installation is first choice for straight busway but horizontal installation is available according to requirements.
The standard length of every section busway 6m.
Reasonable design of connector makes both side outline and top outline available. Inner extensive ball cushion inside sides board makes it have average pressure and anti-vibration features. Same specification connectors can be exchanged, which make it easy and quick for installation and disassemble.
Adopt steel high-strength bolt and the recommended torque value is 80-108N.m
Adopt single bolt design make it easy and quick for installation
Professional anti-over turn design can avoid incorrect phase connection.
Expansion design can eliminate linear expansion without effect electric conductivity and mechanical strength.
Special double-bolt design makes it easy to tight connector without wrench.
Features:
1 Current range: 100A¡ª5000A
2 Working voltage: 400V
3 Protection degree: IP42
4 Low voltage drop
5 High dynamic stability
6 Comply with GB7251-97 and IEC439.2.
Description:
A new type of busway designed and developed on the basis of traditional cable mainly used in low-rise building and multi-layer factory etc. Comply to GB7251-97 and IEC439.2.
Note: safety factor is lower than air insulation type and has no moisture-proof feature. And its life-span is short.
Product Feature:
1 Fire-proof,Moisture-proof
2 Anti-corrosion
3 High strength
4 Energy saving, light weigth
Product Description:
1 Material: Steel,alumininum, glass steel etc
2 Features: Fire-proof,Moisture-proof,anti-corrosion,high strength,energy saving, light weigth and good heat dispersion etc.
3 Shape: straight,tee,cross-way, Z, L,tray, ladder and arc type etc.
Plywood case.
17791 Wires Cables Suppliers
Short on time? Let Wires Cables sellers contact you.
RF3212A Screw type cable without centre pin Coaxial cable.
Model: RF3212A IEC male to IEC female high shielded cable Specifications: Accoding to EN60966-2-4 Description: Specification:
Charateristic impedance: 75¡À3 ohm
Rrturn loss:£¾12db from 30mhz to 1000mhz
Screening factor:£¾85db from 30mhz to 1000mhz.
Insulated power cable, plastic insulated power cable, aerial insulated cable, control cable, aluminum conductors steel- reinforced (ACSR), aluminum stranded conductors, polyvinyl chloride (PVC) insulated wires, various flame- retardant and fire-resistant wires and cables, special cable, etc.
(1).Application:
ABC Cable Primarily used for 120 volt overhead service applications such as street lighting,outdoor lighting,and temporary service for construction.To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75oC for polyethylene insulated conductors or 90oC for crosslinked polyethylene(XLP)insulated conductors.
CE cable :H07V-U/H07V-R/H07V-K
Despription:
Related temperature :70C
Related voltage:300/300V
Reference standard:
DIN VDE 0281-3-2001 HD21.3S3:1995+A1:1999
Tinned or bare,stranded or solid copper conductor
PVC/T11 insulation
Applications:
As measuring, monitoring and control cable, it is suitable for the places of machine tool manufacturing, complete equipment installation engineering, power station, refrigeratory equipment, OA equipment, data processing system and heating and air-condition system.
Properties:
Heat resistance, good insulation property, excellent chemical performance, extruding sheath
Standards: UL 758
Structure:
Conductor: fine strands of tinned copper wire, exellent corrosion resistance.
Insulation: special PVC
Colour: acc. to UL 758
Sheath: 80 heat-resistant flame-resistant PVC, pass VW-1 flame testing
Colour: black (RAL9005) green (RAL6018)
Orange(RAL2003) purple(RAL4001)
Or refer to customers requirement.
Technical data:
Rated voltage: 300V
Test voltage: 2000V
Temperature range: Fixed installation: -40--+80
Flexing installation: -10--+80
The minimum bending radius: Fixed installation: 4×external diameter
Flexing installation: 15×external diameter.
Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.
Adds new UDS addresses and updated ODX data for 2010 models.
Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.
The Select Control Module screen now shows "Installed Modules" rather than "Common Modules" if the car being worked on is new enough to have a proper CAN Gateway.
Modified SRI Screen to show more info and force user to select a job before proceeding.
Adds drop-box function selection in Basic Settings and Adaptation.
Reads Mileage stored in many EDC16 ECUs.
New CODES file, now with over 13, 000 fault code and measuring value texts.
New USB drivers for enhanced PC compatibility and stability.
New firmware for HEX interfaces required for compatibility with 6J Ibiza
Updated Label files; better documentation for new and existing models.
Compared with the 812, the 908 has its biggest advantage. It lies in that the 908 can match Airbags under the protocol of UDS while the 812 can only read code, erase code and do coding, and it cannot match airbags. Pls check the comparence in the following pictures. The icons of 908 are activated while the ones of 812 are not.
The new models that the VW launches now or in the future, such as New Bora and Lavida, will all use UDS protocol. Besides, the VAS5054 in the market nearly doesn't support UDS protocol.
ABC Cable
Aerial bundled cable
Standard and application scope:
This product is produced in accordance with the standard of IEC60502/BS 2627. The products,Cu core or Al core XLPE or HDPE aerial insulated electric power cable,may be used for the fields where the A.C.rated voltage U(Um) is 0.6/1kV.
Using feature:
1) The max. long-term operating temperature of cable conductor(cable having supporting structure):
a) XLPE insulation :90¡ãC
b) HDPE insulated 75¡ãC
2) When short circuit (the Max. lasting time is not over 5 seconds), the Max.temperature of the cabl:
a)XLPE insulated: 250¡ãC
b)HDPE insulated 150¡ãC
3) When laying, the temperature should not be lower than -20oC;
4) The permitted bend radius should not be less than the diameter of cylinder that had been used for the bend testing.
Application:
The products are used for household electrical appliance, electrical tools and various mobile, electrical equipments of A.C rated voltage 450/750V or lower. Si-rubber is used as connection of appliance in moto, metallurgy, eletrical power, oil-fields, chemistry industrial, also in the process of heating for stimulating the liquid.
It have weather-proof character and certain grease-proof character and are suitable for outdoor usage and the occassio with greasy dirt. Also can be used for various mobile electrical devices, bearing strong mechanical force.
Standard:
It is manufactuerd according to HD22.1 & HD22.4.
Standard :
It is manufacture under IEC 60502-1/BS6346, also can be made to order.
Application:
It is used to transmit and distribute power on the power line of A.C. rated voltage 0.6/1kV.
Using features:
1. Rated voltage: Uo/U: 0.6/1kV
2. No. of core: Ranging from single core to 5 cores, inlcuding earth core.
3. The highest allowed operating temperature of conductor for long-term working is 70oC. In short-circuit (Max. long-term is no more than 5 seconds), the highest temperature for conductor is no more than 160oC.
4. D.C. resistance of the conductor complies with the stipulations of IEC 60502-1/BS6346.
5. The environment temperature should be no lower than 0oC when lay. Otherwise it should be preheated.
7. Working Frequency Voltage Test: 2.5Uo+2kV/5min without puncture.
sell coaxial cable with messenger,messenger wire
CCS + FPE + Al foil + braiding + jacket£¬diameter: 1.00, 1.02, 1.25, 1.66,2.15, 2.77mm available
2.dielectric: foamed PE, solid PE available
3.shield: AL foil (bonded/ unbonded), copperized AL foil (bonded/ unbonded)
4.braiding wire: Cu, Al-Mg, TC available
braiding wire diameter: 0.12mm, 0.15mm, 0.16mm available
braiding net number: 32, 48, 64, 96, 128, etc
braiding coverage: 30-95%
5.jacket: PVC, PE
color: white, black etc.
6.OEM and client's specification are acceptable.
Packing:
1.packing length:100,200,305m/roll; 100,200,300yard/roll;n other length available according to client's request
2.inner packing:wooden drum, plastic drum, plastic bag
3.outer packing:carton,plastic bag
4.other packing available according to client's request.
Structure:
Solid bare copper conductor, pe insulation, center cross skeleton, aluminum foil screen, pvc/pe /lsoh sheathed.
Standard:
Europe celenec en 50173/50167
Usa eia/tia568b
International iso/iec 11801/61156
China yd/t 1019-2001.
