Brand name AODON
Commodity name hot melt glue gun
Model AD-A
Input voltage AC100V-240V
Output power 15W,20W,12/20W
Warming up time 2-3min
Output temperature 160íµ-180íµ
Weight 120g/pcs
Size 130*110*25(mm)
Available type of glue stick 6.8mm-7.5mm
Diameter of nozzle 1.5mm
The volumn of glue 3-5g/min
Colour variety
Packing Transparent blister plastic.
Application
Hot melt glue gun is widely applied in many fields , such as electronics industry, food product industry,
package industry,handcraft industry ,toys industry and so on. It is suitable for all kinds of hot melt glue stick.
feature
1.Adopting hi-tech PTC heater, high speed in glue melting, energy-efficient and environment-friendly.
2.Dual power design can set dual temperature
3.The body is made from fireproof engineering plastic, high temperature resistance and no deformation.
4.The trigger is made from POM plastic, high hardness and shatter resistance.
5.Thermal insulation at the back of the bore prolong the life of silicon case and gun , leak-proof design,
6.lightweight ,having switch, convenient and easy to handle.
Brand name AODON
Commodity name Hot melt glue gun
Model AD-F
Input voltage AC100V-240V
Output power 100W, 120W
Warming up time 2-3min
Output temperature 100íµ-220íµ
Weight 260g/piece
Size 190*160*40(mm)
Available type of glue stick 10.5mm-11.5mm
Diameter of nozzle 2mm
The volumn of glue 20-30g/min
Colour variety
Packing transparent blister plastic
Application
Hot melt glue gun is widely applied in many fields , such as electronics industry, food product industry,
package industry,handcraft industry ,toys industry and so on. It is suitable for all kinds of hot melt glue stick.
Feature
1.Manual temperature adjustment system from 100ípC to 220ípC.
2.Adopting hi-tech PTC heater, high speed in glue melting, energy-efficient and environment-friendly.
3.The body is made from fireproof engineering plastic, high temperature resistance and no deformation.
4.The trigger is made from POM plastic, high hardness and shatter resistance.
5.Thermal insulation at the back of the bore longthen the life of silicon case and gun,leak-proof design.
6.Lightweight , convenient and easy to handle.
Brand name AODON
Commodity name Hot melt glue gun
Model AD-B
Input voltage AC100V-240V
Output power 60W, 80W 60W/100W
Warming up time 2-3min
Output temperature 200íµ-220íµ
Weight 240g/piece
Size 190*160*35ú¿mmú¬
Available type of glue stick 10.5mm-11.5mm
Diameter of nozzle 2mm
The volumn of glue 15-20g/min
Colour variety
Packing transparent blister plastic
Application
Hot melt glue gun is widely applied in many fields , such as electronics industry, food product industry,
package industry,handcraft industry ,toys industry and so on. It is suitable for all kinds of hot melt glue stick.
feature
1.Adopting hi-tech PTC heater, high speed in glue melting, energy-efficient and environment-friendly.
2.Dual power design can set dual temperature
3.The body is made from fireproof engineering plastic, high temperature resistance and no deformation.
4.The trigger is made from POM plastic, high hardness and shatter resistance.
5.Thermal insulation at the back of the bore prolong the life of silicon case and gun , leak-proof design,
6.lightweight ,having switch, convenient and easy to handle.
Brand name AODON
Commodity name Digital automatic soldering machine
Model AD-006A
Input voltage AC 220V
Output power 60W
Warming up time 1 min
Output temperature 200íµ-480íµ
Available solder wire 0.6mm-1.2mm
Color Bright silver
Packing carton box
Size 150*330*160(mm)
G.W/N.W 4.5kg/4kg
Feature
1.Adopt microcomputer digital display temperature system ,the actual soldering temperature is visual ,clear and controllable.
The temperature can be accurate to í+2íµ.
2.Adopt imported ceramic heater from Japan, characterized with quick heating up ,stable temperature and long life.
3.Use unleaded and environment-friendly welding head
4.Anti-static design can protect the sensitive element from damage.
5.Foot switch controls the stepping motor, feed tin automatically,improving work efficiency.
6.Perfect conbination of two machine arms which can be rotated all-round ,making soldering work flexible and efficient.
7.The amount and the speed of feed tin can be adjusted according to need and controlled accurately.
8.The machine is applicable to all soldering work and the operation is easy and convenient.
9.Quick-wear part can be replaced easily.
10.Easy cleaning and easy care,small occupancy.
Brand name AODON
Commodity name Digital automatic soldering machine
Model AD-006A
Input voltage AC 220V
Output power 60W
Warming up time 1 min
Output temperature 200íµ-480íµ
Available solder wire 0.6mm-1.2mm
Color Bright silver
Packing carton box
Size 150*330*160(mm)
G.W/N.W 4.5kg/4kg
Feature
1.Adopt microcomputer digital display temperature system ,the actual soldering temperature is visual ,clear and controllable.
The temperature can be accurate to í+2íµ.
2.Adopt imported ceramic heater from Japan, characterized with quick heating up ,stable temperature and long life.
3.Use unleaded and environment-friendly welding head
4.Anti-static design can protect the sensitive element from damage.
5.Foot switch controls the stepping motor, feed tin automatically,improving work efficiency.
6.Perfect conbination of two machine arms which can be rotated all-round ,making soldering work flexible and efficient.
7.The amount and the speed of feed tin can be adjusted according to need and controlled accurately.
8.The machine is applicable to all soldering work and the operation is easy and convenient.
9.Quick-wear part can be replaced easily.
10.Easy cleaning and easy care,small occupancy.
This machine is a new model equipment designed by this company. Can automatically weave the weft wire and warp wire together. The grassland fence produced has the features of innovative structure, firmness, precision and reliable property. The productive capacity can be 150m/h.
Sending wire with full automatic, applicable to low-carbon steel wire body machine, design reasonable, less noise , easier operate, non-polar adjust the number of welding.
Mainly used for the construction mesh.
Welding wire diameter ª¦0.4-ª¦1.2ú¿mmú¬
Welding mesh size 1/4íS-2íS
Welding width 600-1220ú¿mmú¬
Speed of welding 100 times/min
Nominal voltage 380v 3 phase electric 50HZ
Nominal power 56KVA
Exterior size 2500í-1500í-1200
Weight of machine 1800ú¿kgú¬
Our factory's pulley continues draw bench the pulley continuous wire drawing machine has a simple structure, low cost, easy to operate and so on. Specifications suitable for drawing a variety of fine metal wire, especially suitable for drawing low-carbon steel wire, galvanized wire, tire steel wire, stainless steel wire, hose steel wire, spring steel wire, welding wire as well as aluminum pole, copper wire etc. Scope of application: gas security wire, welding electrode wire, stainless steel wire, galvanized iron wire, medium and high-carbon steel wire, copper wire, wire and other metal products used etc.,
The production of straight-type wire drawing machine which our company produced with electronic control system based on inverter technology, the realization of the adaptive and other advanced PID control, the use of field bus or digital-to-analog conversion technology, equipment, high-performance, high reliability operation. Its characteristics: high-speed, high efficiency, low-cost, low consumption, simple operation, process adaptability, can be any combination of user requirements in accordance with a high degree of automation.
The products for use in high-cord, wire wheels, wire rope, gas protection welding wire, stainless steel wire, steel wire umbrella unit, PC steel wire and so on.
Water tank type wire drawing machine the production of the water tank type wire drawing machine is used in wire-drawing of low, medium and high carbon steel wire, stainless steel wire, prestressed steel wire, alloy steel and so on. The equipment for steel cord, hose wire, spring steel, tempered steel wire tires, gas protection welding wire, and stainless steel wire.
Ultrasonic plastic welding series is assembled with ultrasonic generator, control unit and welding press to be a precisely integral welding equipment. Our high quality ultrasonic plastic welding series has various welding modes which can meet customer's inquires.
Products name Large-scale composite ultrasonic welding machine Model HD-LHJM2018
Power 20KHZ Voltage 380V Three-phase four-wire
Weight 1800kg Size 4500*2000*2100mm
Efficiency 0-20m/min Welding area 1600mm Design by customers needs
Applicability industry Spring bed, mattress covers, bed sheets, bedding, upholstery, lined winter clothes, pajamas, pillowcases, sleeping bags, snow cloth, cotton-padded jacket, car seat and other filtration products
Product configuration and characteristics 1. Change the traditional Sewing stitches processing techniques,
Thread-less quilting for higher product class
2. Different pattern design ,Creating different patterns by replacing
pattern wheels
3. Different pattern design, Artistic, trendy and 3-dimensional product 4. Plus a specially designed torque motor ensure take-up formation constant tension
5. Import ultrasonic system to enhance the strength of sewing products ,greatly improved production efficiency
6. The device is equipped with voltage regulators to ensure the stability and service life of the machine
Use:
This machine can lapping the cable with the copper belt, mica belt, aluminium foil, dion belt, the transparent belt, the wheat belt and the adhesive-bond cloth.
Technical parameter:
1.Applicable wire diameter: 0.25mm-12mm
2.The pay-off bobbin size:100mm-280mm
3.The take-up bobbin size:800mm
4.Power: 3 phase, 2.2kw, 2 pc frequency converter, take-up power 16 n.M
5.Speed: 2500r/m
Welding is one of the most critical operations in fabrication of sheet steel fabrication of assemblies. To some extent the strength of the assemblies depend on the quality of welding. Hence, we take utmost care in welding operation.
We have wide range of welding equipments of reputed brands like L&T, Esab & Mogora Cosmic. We can carry out different types of welding depending on the type of fabrication. The availability of such varied equipments ensures that we meet all your welding needs.
MIG/MAG/TIG, Projection Welding, CO Welding, Arc Welding
Ck777d
Brief intro:
Dedicated infrared heating with strong penetration capability in evenly heated parts. A breakthrough over disadvantages from traditional hot air desoldering station which covers elements when heating, causing higher thermal impact.
Features£º
-esd safe unit
-led temperature display
-infrared desoldering technology through independent development and research.This machine can desolder all components in 15-45 mm size.
-infrared heating and desoldering twice faster than hot air gun, greatly reduce heat damage rate on device
-infrared heating has no hot air flow and will not affect the surrounding small components. It is applicable to all small components especially micro bga component.
-lamp handle is installed with sensitive magnetic sensor. When lamp handle is held down facing floor, system is directly set to work mode. When it put back to handle bracket (on position), system is automatically set to standby mode, it is convenient for real-time operation.
-can be integrated with our 853 series preheating station which has 500w heating system and preheating area of 120 mm in width and 120 mm in height.
-warranty: 1 year parts and labor. Please contact us for claims or damaged or missing parts (accessories) within 7 days from date of purchased
Specification:
Current voltage(ac):220 + 10%
Current overload protection: >= 6a
Power consumption:180 w
Infra red temperature: 200-380 c, adjustable
Dimension£º31.2*28*15.5cm
Weight: 3.6 kg
Pc/ctn£º6
Package contain:
Rework station 1
Lamp handle 1
Handle bracket 1
Two-core power cable 1
User manual 1
Warranty card 1
Dimension£º31.2*28*15.5cm
Weight: 3.6 kg
Pc/ctn£º6
3619 Welded Wire Mesh Suppliers
Short on time? Let Welded Wire Mesh sellers contact you.
