Key Features: 1.Configurable pressure display units 2. 2 independent limit switches with many configuration options 3.Analog signal output with possibility of characteristic curve spread, curve reversal and offset setting 4.Characteristic curve implementation via table with max. 30 measuring points 5.Complete configurable parameters and measuring point protocol possible through optional transmitter PC interface Key Specifications: 1.Relative pressure Measuring range: 0 ~ + 1.6 bar to 0 ~ +60 bar Overpressure: 4 bar ~ 200 bar Burst pressure: 7 bar ~ 250 bar Characteristics curve deviation: 0.5% FS or 1.0% FS 2.Vacuum and ± measuring ranges: Measuring range: 0 ~ (-) 1.0 bar to (-) 1 ~ +24 bar Overpressure: 4 bar ~ 100 bar Burst pressure: 7 bar ~ 150 bar Characteristics curve deviation: 1.0% Full scale 3.Permissible ambient temperature: -10° C ~ +70° C 4.Permissible media temperature: -10° C ~ + 70° C 5.Protection class: IP65 per DIN EN 60529 6.Non-linearity: < 1.0% full scale 7.Hysteresis: < 0.5% full scale 8.Power supply: 24 V AC/DC 9.Analog output signal: (0) 4-20mA / 0-10V 10.Output contacts: 2 potential free relay contact (32V AC/DC , 2A) or semiconductor switches (3~32 V AC/DC, 0.25A), configurable 11.EMC: EN 61326-1:2013, EN 61326-2:2013 12.Material (housing): stainless steel 1.4301 13.Process connection (media contact): stainless steel 1.4404 14.Measuring diaphragm: ceramic 15.Display: 4..6 digit LCD, full graphic, color changing 16.Configurable: attenuation, switching output, measuring range unit, output signal, zero point stability, implementation of characteristic curve, password Application areas: 1.Pump Control system 2.pump and compressors monitoring 3.Filling level measuring Industrial areas: 1.Process engineering 2.Environment engineering 3.Renewable energy eg. biogas etc 4.Waste Water Engineering 5.Effluent treatment 6.Breweries, alcohol industry
Key features: 1.Catalytic bead based pellistor sensor cell with low flash energy 2. 10-bit microprocessor control unit 3.Non-intrusive one man calibration via hall effect switches 4.Atex certified explosion proof / flameproof, suitable for zone 1, 2 gas explosion installation 5.Linear, proportional analog industry standard current output 6.Continuous system self-diagnosis with watch dog 7.Flashback arrestor with sintered filter 8.Auto zero point tracking to zero point compensation 9.Sil 2 hw tuv certified 10.Rs485 serial interface with modbus rtu communication (optional) 11. 1 or 3 relay output module (optional) 12.System and alarm led indicators (optional) 13.Modbus rtu communication over rs485 serial interface Technical specifications: Measuring parameters: hydrogen gas flammability or leakage Sensor technology: catalytic bead based pellistor sensor cell Measuring range: 0 ~ 100 % lel ( 0 ~ 4% v/v @ stp) Response time (t90): < 30 sec Control unit: 10 bit microprocessor based Warm up time: < 5 mins Auto zero point tracking for drift compensation Power supply: 24 vdc Ingress protection: ip65 Enclosure: stainless steel (for sensor cell), anti-static epoxy coated metal alloy (for transmitter) Output: linear, proportional 4-20ma Mounting: wall, duct, pipeline Safety integrity level: sil 2 Atex marking: ce 722 ex ii 2g eex d iic t6, ce 722 ex ii 3g eex na iic t6 Optional: lcd display, alarm leds, potential free relay contacts Hazardous area: zone 1, 2 Application: 1.Oil & gas, petrochemical, refinery 2.Battery rooms, ups facility 3.Mobile switching center (msc) of cellular / telecom site 4.Cracking plants 5.Hydrogenation plants 6.Chemicals 7.Cold stores 8.Pharmaceuticals, medicinal formulation
Key Features: 1.Robust design with high repeatability of switching contacts 2.Over pressure protection 3.Short circuit protection 4.Maintenance free due to inductive circuit movement Key Specifications: 1.Measurement range: 0-400 mbar to 0-6 bar 2.Operating temperature: Ambient: 0°C to +70°C 3.Protection class: IP54 per DIN EN 60529 4.Static operating pressure: 16 bar 5.Diaphragm: NBR or Viton 6.Measuring linearity: < 2.0% Full scale 7.Measuring hysteresis: < 1% Full scale 8.Operating voltage: 24 V DC/AC 9.Output signal: (0) 4-20 mA or 0-10 V, linear, proportional 10.Zero adjustment with the dial 11. 1 or 2 adjustable microswitches 12.Pressure chamber: Brass 13.Pressure connection: G 1/8, female thread Applications areas: 1.Water pumps, lube pump monitoring 2.Pump control 3.Pipe water / liquid flow monitoring 4.Air ducts monitoring Industrial areas: 1.HVAC & MEP applications 2.Cement plants 3.Hydro power plants 4.Manufacturing and chemical plants
Key Features: 1.High sensitivity 2.Robust Design, over pressure protected 3.Wear resistant sensor 4.High resistance to corrosion 5.Low hysteresis 6.Large LED Display Key Specifications: 1.Measuring range: 0 ~ 6 mbar to 0 ~ 60 mbar, max static pressure: 32 bar 0 ~ 32 mbar to 0 ~ 320 mbar, max static pressure: 140 bar 0 ~ 130 mbar to 0 ~ 1300 mbar, max static pressure: 140 bar 0 ~ 500 mbar to 0 ~ 5000 mbar, max static pressure: 140 bar 0 ~ 2 bar to 0 ~ 20 bar, max static pressure: 140 bar 2.Linearity: < 0.1 % 3.Hysteresis: < 0.1 % 4.Temperature coefficient: < 0.5 % / 10° C 5.Operating ambient temperature: -10° C to +70° C 6.Operating media temperature: 0° C to +80° C 7.Protection class: IP67 8.Electrical output: 4-20mA 9.Power supply: 24 V DC 10.Pressure connection: 2 x 1/4� NPT 11.Display: analog display with 0 ~ 100% scale. digital display (only with communication module option -K installed) 12.Electrical connections: internal terminal block 13.Material (media contact): Stainless steel 316 L (1.4404) 14.Electronic housing: Aluminum, surface coated 15.Marking / approval: CE mark, complies with EMV specifications EN 50082-1 and EN 50082-2 Application areas: 1.Filter technique 2.Precision measurements in air conditioning conduits 3.Clean room pressure compensation 4.Burner vacuum measurement 5.Circulating air controlling in furnaces Industrial areas: 1.Air conditioning and ventilation systems 2.HVAC and ventilation application 3.Environment monitoring 4.Clean room and laboratory rooms
Key Features: 1.High sensitivity 2.High repeatability of switching points 3.Long service life 4.Robust Design, over pressure protected Key Specifications: 1.Application: flow switch / control â?? Thermal oil DIN 32 727 or hot water Flow 100 2.Measuring range: 0 ~ 250 mbar to 0 ~ 6 bar 3.Nominal pressure: 25 bar 4.Max. static operating pressure: 6 ~ 16 bar 5.Max. pressure load: one sided overpressure protected up to nominal pressure on (+) and (-) side of diaphragm, partial vacuum protected 6.Accuracy: ± 2.5% of full scale 7.Operating ambient temperature: -10° C to +70° C 8.Operating media temperature: +70° C 9.Protection class: IP54 acc. to DIN EN 60529 10.Mounting: Vertical 11.Zero adjustment: located on dial 12.Contact output: 1 or 2 microswitches, 1-channel change-over contacts 13.Pressure connection: Thread G 1/4 female, cutting ring connection for 6,8,10,12 mm diameter tube of brass, zinced steel or chrome nickel steel 14.Measuring system: diaphragm, of reinforced Viton Application areas: 1.Thermal oil flow monitor and control 2.Hot water flow monitoring and control Industrial areas: 1.Building heating system 2.Power plants, boiler application 3.Clean room and laboratory rooms
Key Features: 1.Catalytic bead based Pellistor sensor cell with low flash energy 2. 10-bit microprocessor control unit 3.Non-intrusive one man calibration via hall effect switches 4.ATEX certified explosion proof / flameproof, suitable for Zone 1, 2 gas explosion installation 5.Linear, proportional analog industry standard current output 6.Continuous system self-diagnosis with watch dog 7.Flashback arrestor with sintered filter 8.Auto Zero point tracking to zero point compensation 9.SIL 2 HW TUV certified 10.RS485 serial interface with Modbus RTU communication (optional) 11. 1 or 3 relay output module (optional) 12.System and alarm LED indicators (optional) 13.Modbus RTU communication over RS485 serial interface
Key Features: 1.Catalytic bead based Pellistor sensor cell with low flash energy 2. 10-bit microprocessor control unit 3.Non-intrusive one man calibration via hall effect switches 4.ATEX certified explosion proof / flameproof, suitable for Zone 1, 2 gas explosion installation 5.Linear, proportional analog industry standard current output 6.Continuous system self-diagnosis with watch dog 7.Flashback arrestor with sintered filter 8.Auto Zero point tracking to zero point compensation 9.SIL 2 HW TUV certified 10.RS485 serial interface with Modbus RTU communication (optional) 11. 1 or 3 relay output module (optional) 12.System and alarm LED indicators (optional) 13.Modbus RTU communication over RS485 serial interface Technical Specifications: 1.Measuring Parameters: LEL or flammable concentration of ammonia gas 2.Sensor Technology: Catalytic bead based pellistor sensor cell 3.Measuring range: 0 ~ 100 % LEL ( 0 ~ 15% v/v @ STP) 4.Response time (t90): < 30 sec 5.Control unit: 10 bit microprocessor based 6.Warm up time: < 5 mins 7.Auto zero point tracking for drift compensation 8.Power supply: 24 VDC 9.Ingress protection: IP65 10.Enclosure: Stainless steel (for sensor cell), anti-static epoxy coated metal alloy (for transmitter) 11.Output: linear, proportional 4-20mA 12.Mounting: wall, duct, pipeline 13.Safety integrity level: SIL 2 14.ATEX marking: 11.CE 722 Ex II 2G EEx d IIC T6 12.CE 722 Ex II 3G EEx nA IIC T6 13.Optional: LCD Display, alarm LEDs, potential free relay contacts 14.Hazardous area: Zone 1, 2
Key Features: 1.Explosion proof ATEX certification with CE Ex II 3 G c EEx nA IIC T4 for DE38###R and CE Ex II 3 D c IP65 T125 for DE38###S 2.Robust design with high repeatability 3.Over pressure protection 4.Wear free non-contact LVDT sensing element, thus no maintenance 5.Signal output with possibility of various characteristic curve 6.Characteristic conversion of output via 3?¦.30 entries table 7.Complete set-up of all parameters and print out by using optional PC programming interface EU03 8.Measuring range: 0-400 mbar to 0-1600 bar 9.Operating temperature: Ambient: -10°C to +70°C; Media:-10°C to +70°C 10.Protection class: IP65 per DIN EN 60529 11.Output: 0/4-20mA, 0-10 VDC 12.Display: 3 ½ digit LCD Applications areas: 1.Monitoring of compressors, filters and vacuum systems 2.Measurement of differential pressure between supply and return fuel lines in heating & 3.cooling systems (Chillers) 4.Flow measurement ?? lubricants, oil, hydrocarbons, water, gases 5.Control pressure ?? air, gases, oil, water, lubricants 6.Level measurement- tank, container of lubricants, oils, water, liquids etc Industrial areas: 1.Cement plants 2.Nuclear plants, coal or gas fired power plants 3.hydro power plants 4.Manufacturing and chemical plants
Solar Water Heater, Solar Lights, Solar Pump, RO Systems, LED Lights, Solar Power Plant, Table Top Scale, Platform Scale, Bench Top Scale, Heavy Platform Scale, Price Computing Scale, Home cum Personal Scale, Jewellery Scale, Digital and Electronic Weighing Scales, laboratory balances, industrial scales and Retail weighing machines.
Which use to scale living cattle gross weight before entrance slaughtering house for killing, the detail data as following: 1)-Max Weight capacity: 1200Kg, Differentiate Capacity: 500g 2)-Out size: 2500X900X1600(LXWXH) 3)-Material: Hot galvanized steel Stainless steel
Product Description We,Hebei Aipuda Hoisting Equipment Manufacturing Co., Ltd., are one of the leading manufacturers, exporters, traders & suppliers of high quality SPRING BALANCER and Accessories. This model Spring Balancer are suitable for a heavy weight device.The capacity is 180-200kg,stroke is 1.5m. Product Feature Fall arrest devices prevent tool drop caused by spring breakage;The secondary support hanger is available on every model;Cartridge spring make the spring replacement easy and safe;The plug fixing system make the cable replacement easy;Drum lock is available for fixing tool or cable replacement. Product Specification/Models model capacity(kg) stroke(m) Cable dia(mm) EW-70 60-70 1.5 5.1 EW-80 70-80 1.5 5.1 EW-100 80-100 1.5 5.1 EW-120 100-120 1.5 5.1 EW-140 120-140 1.5 5.1 EW-160 140-160 1.5 5.1 EW-180 160-180 1.5 5.1 EW-200 180-200 1.5 5.1 Application This model are conventional model suitable for a heavy weight device. Suspending a tool for product assembly line. Frequent fastening screws,bolts and nuts. Suspending a jig,tool,welding gun etc. Origin China
Product Description We,Hebei Aipuda Hoisting Equipment Manufacturing Co., Ltd., are one of the leading manufacturers, exporters, traders & suppliers of high quality SPRING BALANCER and Accessories. This model Spring Balancer are suitable for a heavy weight device.The capacity is 180-200kg,stroke is 1.5m. Product Feature Fall arrest devices prevent tool drop caused by spring breakage;The secondary support hanger is available on every model;Cartridge spring make the spring replacement easy and safe;The plug fixing system make the cable replacement easy;Drum lock is available for fixing tool or cable replacement. Product Specification/Models model capacity(kg) stroke(m) Cable dia(mm) EW-70 60-70 1.5 5.1 EW-80 70-80 1.5 5.1 EW-100 80-100 1.5 5.1 EW-120 100-120 1.5 5.1 EW-140 120-140 1.5 5.1 EW-160 140-160 1.5 5.1 EW-180 160-180 1.5 5.1 EW-200 180-200 1.5 5.1 Application This model are conventional model suitable for a heavy weight device. Suspending a tool for product assembly line. Frequent fastening screws,bolts and nuts. Suspending a jig,tool,welding gun etc. Origin China
Flow indicator, better than Microfluidic flow indicator. Now, the market of flow indicator is very hot. there exists about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as briefcase company to declare that they are manufactures of flow indicator. This situation is worrying. The so-called manufactures do not have their own calibrator at all, leave alone the accuracy of flow indicator.
Flow meter fuel, better than kem flow meter fuel. Now, the market of flow meter fuel is very hot. There exists about 80 factories located in the suburb of dongtai city in zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as briefcase company to declare that they are manufactures of flow meter fuel. This situation is worrying. The so-called manufactures do not have their own calibrator at all, leave alone the accuracy of flow meter fuel.
Crude oil flow meters, 0.2% accuracy crude oil flow meters. Now, the market of crude oil flow meters is very hot. There exists about 80 factories located in the suburb of dongtai city in zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as briefcase company to declare that they are manufactures of crude oil flow meters. This situation is worrying. The so-called manufactures do not have their own calibrator at all, leave alone the accuracy of crude oil flow meters.
flow meter types,better than KOBOLD flow meter types flow meter types,1000bar flow meter types. Now, the market of flow meter types is very hot. there exists about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as briefcase company to declare that they are manufactures of flow meter types. This situation is worrying. The so-called manufactures do not have their own calibrator at all, leave alone the accuracy of flow meter types. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class flow meter types and established by the name of his hometown. The flow meter types were produced and developed by the technology of Siemens numerical control system.
liquid nitrogen flow meter,1000bar liquid nitrogen flow meter liquid nitrogen flow meter,1000bar liquid nitrogen flow meter. Email: sales8@gninstruments.com,Leon Tel: (86)21-5763-2436-102 Fax: (86) 21-57634942 Now, the market of liquid nitrogen flow meter is very hot. there exists about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as briefcase company to declare that they are manufactures of liquid nitrogen flowmeter. This situation is worring. The so-called manufactures do not have their own calibrator at all, leave alone the accuracy of liquid nitrogenflowmeter. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class liquid nitrogenflowmeter and established Shanghai Cixi Instrument Co. Ltd by the name of his hometown. The liquid nitrogenflowmeter were produced and developed by the technology of Siemens numerical control system. Once upon a time, China, the world’s factory, is always the synonym with the “low quality”. Especially, the liquid nitrogenflowmeter, which are used to control in automatic process are produced cumbersome and noisy and can not measure the sticky medium. Thus, whether the quality is stable has become users’ greatest concern. So, sometimes buying liquid nitrogenflowmeter is like buying a lottery ticket. What’s more, the quality is left to chance and can not be guaranteed. That Shanghai Cixi Instrument Co. Ltd has introduced the technology from Siemens in Germany has greatly improved the quality of liquid nitrogenflowmeter to the world leading level. To be frank, the accuracy if our products is double higher than the similar products in Japan. In liquid nitrogenflowmeter, even the little screw holes or the gears and the watch cases are all accomplished by the Siemens’s technology of numerically controlled production center. Due to this, the production of liquid nitrogen flow meter gets rid of the traditional manufacturing technique and will get landmark achievement. In the future the flow meter in our company will be produced to resist the high temp and pressure. Besides, we will try our best to keep pace with the world not only in the quality of our products but also in the level of resisting high temp and pressure. In our company, we have the stock of liquid nitrogenflowmeter of all caliber. From this, it is not hard to find that our company has sufficient funds and our products sale good. Nowadays, there hardly exist companies who own the ability to keep stock. But we dare and have the strength to do that.
Refrigerant flow meter, better than sika refrigerant flow meter Refrigerant flow meter, 1000bar refrigerant flow meter. Email: sales8@gninstruments.Com, leon tel: (86)21-5763-2436-102 fax: (86) 21-57634942 Now, the market of refrigerant flow meter is very hot. There exists about 80 factories located in the suburb of dongtai city in zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as briefcase company to declare that they are manufactures of refrigerant flow meter. This situation is worring. The so-called manufactures do not have their own calibrator at all, leave alone the accuracy of refrigerant flow meter. Facing this complicated situation, the chief engineer, mr. Tu jianwen, who worked as a senior engineer in siemens in germany, came to shanghai from his hometown cixi in 2008. He was determined to create the world-class refrigerant flow meter and established shanghai cixi instrument co. Ltd by the name of his hometown. The refrigerant flow meter were produced and developed by the technology of siemens numerical control system.
bitumen flow meter,better than BADGER bitumen flow meter bitumen flow meter,1000bar bitumen flow meter. Email : sales8@gninstruments.com,Leon, Tel: (86)21-5763-2436-102 Fax: (86) 21-57634942 Now, the market of bitumen flow meter is very hot. there exists about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as briefcase company to declare that they are manufactures of bitumen flow meter. This situation is worrying. The so-called manufactures do not have their own calibrator at all, leave alone the accuracy of bitumen flow meter. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class bitumen flow meter and established Shanghai Cixi Instrument Co. Ltd by the name of his hometown. The bitumen flow meter were produced and developed by the technology of Siemens numerical control system. Once upon a time, China, the world’s factory, is always the synonym with the “low quality”. Especially, the bitumen flow meter, which are used to control in automatic process are produced cumbersome and noisy and can not measure the sticky medium. Thus, whether the quality is stable has become users’ greatest concern. So, sometimes buying bitumen flow meter is like buying a lottery ticket. What’s more, the quality is left to chance and can not be guaranteed. That Shanghai Cixi Instrument Co. Ltd has introduced the technology from Siemens in Germany has greatly improved the quality of bitumen flow meter to the world leading level. To be frank, the accuracy if our products is double higher than the similar products in Japan. In bitumen flow meter, even the little screw holes or the gears and the watch cases are all accomplished by the Siemens’s technology of numerically controlled production center. Due to this, the production of bitumen flow meter gets rid of the traditional manufacturing technique and will get landmark achievement. In the future the flow meter in our company will be produced to resist the high temp and pressure. Besides, we will try our best to keep pace with the world not only in the quality of our products but also in the level of resisting high temp and pressure. In our company, we have the stock of bitumen flow meter of all caliber. From this, it is not hard to find that our company has sufficient funds and our products sale good. Nowadays, there hardly exist companies who own the ability to keep stock. But we dare and have the strength to do that.
Annular flow meter, better than sika annubar flow meter. Now, the market of annular flow meter is very hot. There exists about 80 factories located in the suburb of dongtai city in zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as briefcase company to declare that they are manufactures of annular flow meter. This situation is worrying. The so-called manufactures do not have their own calibrator at all, leave alone the accuracy of annular flow meter.
