Dp Transmitter

Key Features: 1.High sensitivity 2.Robust Design, over pressure protected 3.Wear resistant sensor 4.High resistance to corrosion 5.Low hysteresis 6.Large LED Display Key Specifications: 1.Measuring range: 0 ~ 6 mbar to 0 ~ 60 mbar, max static pressure: 32 bar 0 ~ 32 mbar to 0 ~ 320 mbar, max static pressure: 140 bar 0 ~ 130 mbar to 0 ~ 1300 mbar, max static pressure: 140 bar 0 ~ 500 mbar to 0 ~ 5000 mbar, max static pressure: 140 bar 0 ~ 2 bar to 0 ~ 20 bar, max static pressure: 140 bar 2.Linearity: < 0.1 % 3.Hysteresis: < 0.1 % 4.Temperature coefficient: < 0.5 % / 10° C 5.Operating ambient temperature: -10° C to +70° C 6.Operating media temperature: 0° C to +80° C 7.Protection class: IP67 8.Electrical output: 4-20mA 9.Power supply: 24 V DC 10.Pressure connection: 2 x 1/4� NPT 11.Display: analog display with 0 ~ 100% scale. digital display (only with communication module option -K installed) 12.Electrical connections: internal terminal block 13.Material (media contact): Stainless steel 316 L (1.4404) 14.Electronic housing: Aluminum, surface coated 15.Marking / approval: CE mark, complies with EMV specifications EN 50082-1 and EN 50082-2 Application areas: 1.Filter technique 2.Precision measurements in air conditioning conduits 3.Clean room pressure compensation 4.Burner vacuum measurement 5.Circulating air controlling in furnaces Industrial areas: 1.Air conditioning and ventilation systems 2.HVAC and ventilation application 3.Environment monitoring 4.Clean room and laboratory rooms

Key Features: 1.Very low pressure measurable without long-term drift 2.Rugged design 3.Maintenance free 4.Over-pressure protected Key Specifications: 1.Measuring range: 0 ~ 25 Pa to 0 ~ 1000 Pa 2.Maximum static operating pressure: 1.0 bar 3.Maximum safe pressure: 1.7 bar 4.Straight line error (max.): 1.0 % Full scale 5.Pressure connection: screw clamp connectors (aluminum) for 6/4 mm or 8/6 tube 6.Repeatability: 0.1 % full scale 7.Operating ambient & media temperature: -10° C to +70° C 8.Protection class: IP65 per DIN EN 60529 9.Linearity: < 2% Full scale 10.Electrical output: 4-20mA linear, 2 â?? wire 11.Power supply: 24 V DC 12.Material, housing: Polyamide PA 6,6 13.Materials, media contact: Silicon, PVC, aluminum, brass Application areas: 1.Filter status / condition monitoring 2.Precision air duct measurement 3.Clean room pressure balance monitoring 4.Burner air feed low pressure detection 5.Oven air feed control Industrial areas: 1.Air conditioning and ventilation systems 2.Auditorium, office, conference rooms 3.HVAC and ventilation application 4.Environment monitoring 5.Clean room and laboratory rooms

Key Features: 1.Explosion proof ATEX certification with CE Ex II 3 G c EEx nA IIC T4 for DE38###R and CE Ex II 3 D c IP65 T125 for DE38###S 2.Robust design with high repeatability 3.Over pressure protection 4.Wear free non-contact LVDT sensing element, thus no maintenance 5.Signal output with possibility of various characteristic curve 6.Characteristic conversion of output via 3?¦.30 entries table 7.Complete set-up of all parameters and print out by using optional PC programming interface EU03 8.Measuring range: 0-400 mbar to 0-1600 bar 9.Operating temperature: Ambient: -10°C to +70°C; Media:-10°C to +70°C 10.Protection class: IP65 per DIN EN 60529 11.Output: 0/4-20mA, 0-10 VDC 12.Display: 3 ½ digit LCD Applications areas: 1.Monitoring of compressors, filters and vacuum systems 2.Measurement of differential pressure between supply and return fuel lines in heating & 3.cooling systems (Chillers) 4.Flow measurement ?? lubricants, oil, hydrocarbons, water, gases 5.Control pressure ?? air, gases, oil, water, lubricants 6.Level measurement- tank, container of lubricants, oils, water, liquids etc Industrial areas: 1.Cement plants 2.Nuclear plants, coal or gas fired power plants 3.hydro power plants 4.Manufacturing and chemical plants