This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, crankshaft, textile machinery, fans, shaft, etc .. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate. Specifications Parameters Max Mass of Workpiece (kg) 50 Max Diameter of Work piece (mm) 700 Distance between Two Support Bearings (mm) 80--700 Journal Diameter Scope of Work piece (mm) 8~80 Diameter Scope of Driving Belt (mm) 18~200 Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 650/1000/1300/2000 Motor Power (kw) 0.55/0.75 Min Achievable Residual Unbalance Amount (emar) 0.5g¡¤ mm/kg. Fumigated wood box.
Item No. DB-02 Description 1) Capacity: 20kg/5g 2) Powered by 4 x AA Batteries(Not Included)£¬ with 4 Load Cells. 3) With Memo Function 4) Unit: kg/lb 5) Product Size: 60.3x38.5x10cm.
Item No. MP-12 Description 1) Capacity: 150kg/1kg 2) Unit: kg, kg&lb 3) Cold - rolling steel Housing, 4) Skidproof Mat 5) Color: white, black 6) Product Size: 28.6x27x4.6cm Packing Display Box or White box CTN QTY 4pcs/ctn CTN MEAS. 32.1x22.9x31cm G.W./N.W. 7.48/7.02kg.
1) Capacity: 5kg/1g 2) Unit: g or lb& oz 3) Stainless Steel Housing & Bowl(Bowl:20.8x20.8x6cm) 4) with Tare function 5) Powder: 2 x AAA batteries( Not Include) 5) Product Size: 21x22.2x9.7cm Packing: Styrofoam, Color box CTN QTY: 8pcs CTN MEAS: 55x44.6x28.7cm G. W. /N. W.: 8.6/8kg 20' QTY: 7040pcs.
1) Powder Coated Metal Housing 2) Stainless Steel Ellipse Bowl 3) Units: KG or KG & LB 4) Product color: white , black (can be changed) 5) Capacity: 2kg,3kg,4kg,5kg 6) Bowl: 23.5x18.5x3.2cm 7) Operational Environment -10ºC ~ 40ºC Product Size:23.5x18.3x21.5cm Packing: Plastic bag , Color box CTN QTY: 8pcs CTN MEAS: 41x41x45cm G.W./N.W.: 10.8kg/8.7kg 20' QTY: 3200pcs
1) Capacity: 180kg/100g 2) Unit: Kg, lb, st 3) 6mm tempered glass 4) Auto on, auto off 5) 1xCR2032 battery 6) Color: Pink, Red, Blue, White 7) Product Size: 31x16x2.1cm 8) Trademark: OEM. Packing: Styrofoam, Color Box CTN QTY: 16pcs CTN MEAS.: 34.5x38x27cm G.W/N.W: 18.0/14.5kg 20' QTY: 12832pcs 40' QTY: 25664pcs.
Measuring tapes. 10 per box.
1, Working voltage rating: 4f+0.5V 2, Working pulse width rating: fa80MS 3, Rated working pulse interval: fa50MS 4, Coil resistance: 430f+5%ohm (23f|f+2f|) 5, Velocity ratio: 100:1; 200:1; 400:1; 800:1 6, Stepping angle: 3.6; 1.8; 0.9; 0.45 degree 7, Step motor driving torque: 30u Nm 8, Specifications (quantity of character 5+1(five integers with one decimal) wheel): 6+1(six integers with one decimal) 9, Character wheel material: PC 10, Rotating direction of character wheel clockwise rotation only 11, Lead length 130mm 12, Range of working ambient temperature: -40f|-70f| 13, Variable-speed gear material: polyoxymethylene 14, Base frame material: 1. aluminum alloy base frame: LF2-YZ 2. plastic base frame: PC 15, Motor stator material: ferronickel alloy 16, Shielding cover material: low-carbon steel shielding cover 17, Error-free working period: faone billion pulse 18, Installation dimension: upper fitting hole space: 24.5*35mm lower fitting hole space: 30.5*30.5mm. In foam tray of 50pcs, 5 foam trays to a carton. Dimension of carton:40*28*42.5cm.
Model TCSW socket wrench torque sensors are used for fast, accurate measurement of bolt or nut wrenching torques. This model operates in both directions so tightening and break-away torques can be measured. It can also be used to check the calibration of mechanical torque wrenches.
- Low profile compression service load cell - Hopper, tank weighing.
The product shows signal of sensor and micro voltage output sensor, which used strain gauge (load, torque pressure etc) into digital display and analogue output as indicator, and intermediate or high sampling and comparison output are available. - Rapid sampling speed (5000 times/sec) - High resolving power (16bit A/D) - High accuracy (over 0.02% F.S) and stability - Calibration of actual load and sensor output value - System error automatic return - Unit conversion (kg, N, ¡×¢´b, kg/¡×©÷, bar, Mpa) - Auto zero function (Display & analogue out zero).
Model PT-100 prints measuring and weighting data of indicator. It is a high speed, ultra-small size, and thermal transfer type printer for industry. - Ultra-small size panel type - Easy to change the paper (Clamshell structure) - Silent and rapid printing speed (50mm/sec) - convenient head cleaning.
It is mounted on square or tubular mast easily and safely. It is not used an outside sensor or mercury switch on machine because, elektronic card has sensor instead of them. It is not impressed by wind , impulse or pulsation. It starts rotating at 10º angle automatically and stops after balancing. If tail jam occurs, brush will rotate reverse direction. Type , density and hardness of brush is selected most properly and revolution per minute of reducer is selected most properly too.With the result that;cow comfort, health, welfare and overall performance is increased. Rotating speed:30 rpm Brush length:70 cm Brush diameter:47 cm Power:0, 18kw Electronic angle measurement.
Model No.: AC-55B Weighing Range: 1-55kg Accuracy: +/-15.0g Max. Detection Speed: 30pcs/min. Weighing Table Length: 1600mm Weighing Table Width: 1000mm Belt Width: 850m Reject System: Air Pusher for option Conveyor Height: 600mm+/-50mm Power Source: AC220V; 50Hz; 1P;10A .
Model No.: CW-145 Weighing Range: 6-300g Accuracy: ¡À0.2g Speed: 150pcs/min. Belt Width: 145mm Reject System: Air Jet or Air Pusher or Swing Arms Power Source: 0.4-0.8Mpa;4L/min. Conveyor Height: 750mm+/-25mm Working Condition: Temperature 0 ¡ãC - 40 ¡ãC Power Source:AC220V;50HZ;1P;10A.
We are manufacturing of mechanical weighing scale last 35 years. 1kg-10pcs 2kg-9pcs 5kg-6pcs 10kg-6pcs 15kg-4pcs.
* Standard RS-232 interface. * 13 standard units to be chosen. * LCD display(backlight for option),single/double display for option. 8pcs/carton.
Lion series exportation truck scale is the standard structure almost all chinese manufacturers can do. It is low cost, short manufacturing period. Our company is focused on quality and development of the structures, so that we can control the cost for the customers, as well as having great technical support. Our advantages: 1.We don't have to turn our truck scale upside and down, while others still need. 2.We can somehow allow the trucks to go in the middle of the truck scale, while others can never allow this 3.We always use 6 u beams in our structure, while others use only 4 u beams and the structure falls down often 4.We can put three pcs 3x18m into a 40 feet container, while others can never put more than 1 pcs into one 40 feet container. We can put three pcs 3x18m into a 40 feet container, while others can never put more than 1 pcs into one 40 feet container.
Features: Made of high tensile casting, stress relieved, seasoned against distortion. Ideal tools for layout, inspection and machining. Supplied in match pairs & numbered. Equality of each matched pair in good standard.
Leveling control valve leveling accuracy Mas-c¡g¡ó0.05mm Function: providing control on resettling time, leveling, and damping adjustment with Installation to machines (1). Provides leveling control of machines installed to isolators with leveling valves (2). Yielding control and benefits on resettling time of machines (3). Benefits for damping adjustment of vibration control.
